MSI H610TI-S03 User manual

H610TI-S03
H610TI-S01
Motherboard
User Guide
Benutzerhandbuch
Manuel d’utilisation

󲀮󾉣󸔆󴃬󴉩
󻺞󼒛󻡷󻼎
󱣎󵭡󳩿󱱥
󱣎󵭡󳩿󱱧

English
Deutsch
Français

󴂬󴋈󸓦
󽍎󺭟󼎦
󶱻󺄷󱛉󳿶
󶠉󱢈󱛉󳿶

1
Contents
Quick Start..................................................................................................................... 3
Specifications................................................................................................................ 5
Back Panel Connectors ............................................................................................... 8
LAN Port LED Status Table .................................................................................... 9
Overview of Components........................................................................................... 10
CPU Socket ........................................................................................................... 11
SO-DIMM Slots ..................................................................................................... 13
M2_1: M.2 Slot (Key M)......................................................................................... 14
CNVI_1: M.2 Slot (Key E)....................................................................................... 15
JCOM1: Serial Port Connector ............................................................................. 15
SATA5~6: SATA 6Gb/s Connectors....................................................................... 16
JHDDPWR1: SATA Power Connector................................................................... 16
JFP1: Front Panel Connectors............................................................................. 17
JAUD1: Front Audio Connector ............................................................................ 17
JAMP1: Audio Amplifier Connector...................................................................... 18
JDMIC1: Digital Microphone Connector............................................................... 18
JLVDS1: LVDS Connector..................................................................................... 19
JPANELSW1: Panel Display Switch Connector ................................................... 19
PWR_SEL1: Panel Voltage Selection Header ...................................................... 20
JTOUCH1: Touch Panel connector....................................................................... 20
JCONVERT1: FPD Brightness Connector............................................................. 21
BKLT_SEL1: Backlight Inverter Voltage Selection Header................................. 21
JUSB1~2: USB 2.0 Connectors............................................................................. 22
JTPM1: TPM Module Connector........................................................................... 22
CPU_FAN1: Fan Connector.................................................................................. 23
JBAT1: Clear CMOS (Reset BIOS) Jumper........................................................... 24
󾖠............................................................................................ 24
Onboard LEDs............................................................................................................. 25
EZ Debug LED....................................................................................................... 25
English

2
Installing OS, Drivers & MSI Center.......................................................................... 26
UEFI BIOS.................................................................................................................... 27
BIOS Setup............................................................................................................ 28
Resetting BIOS...................................................................................................... 29
Updating BIOS....................................................................................................... 29

3
Quick Start
Thank you for purchasing a new motherboard from MSI®. This Quick Start section
provides demonstration diagrams about how to install your computer. Some of the
installations also provide video demonstrations. Please link to the URL to watch it
with the web browser on your phone or tablet. You may have even link to the URL by
scanning the QR code.
Safety Information
The components included in this package are prone to damage from electrostatic
discharge (ESD). Please adhere to the following instructions to ensure successful
computer assembly.
Ensure that all components are securely connected. Loose connections may cause
the computer to not recognize a component or fail to start.
Hold the motherboard by the edges to avoid touching sensitive components.
It is recommended to wear an electrostatic discharge (ESD) wrist strap when
handling the motherboard to prevent electrostatic damage. If an ESD wrist strap
is not available, discharge yourself of static electricity by touching another metal
object before handling the motherboard.
Store the motherboard in an electrostatic shielding container or on an anti-static
pad whenever the motherboard is not installed.
Before turning on the computer, ensure that there are no loose screws or metal
components on the motherboard or anywhere within the computer case.
Do not boot the computer before installation is completed. This could cause
permanent damage to the components as well as injury to the user.
If you need help during any installation step, please consult a certified computer
technician.
Always turn off the power supply and unplug the power cord from the power outlet
before installing or removing any computer component.
Keep this user guide for future reference.
Keep this motherboard away from humidity.
Make sure that your electrical outlet provides the same voltage as is indicated on
the PSU, before connecting the PSU to the electrical outlet.
Place the power cord such a way that people can not step on it. Do not place
anything over the power cord.
All cautions and warnings on the motherboard should be noted.
If any of the following situations arises, get the motherboard checked by service
personnel:

4
• Liquid has penetrated into the computer.
• The motherboard has been exposed to moisture.
• The motherboard does not work well or you can not get it work according to user
guide.
• The motherboard has been dropped and damaged.
• The motherboard has obvious sign of breakage.
Do not leave this motherboard in an environment above 60°C (140°F), it may damage
the motherboard.

5
Specifications
CPU
Supports 12th Gen Intel® Core™ Processors, Pentium®
Gold and Celeron® Processors
Processor socket LGA1700
* Please go to www.msi.com to get the newest support status as new processors
are released.
Chipset Intel® H610 Chipset
Memory
2x DDR4 memory SO-DIMM slots, supporting up to 64GB*
Supports 1R 2133/ 2666/ 2933/ 3200 MHz
Supports Dual Controller Dual-Channel mode
Supports non-ECC, un-buffered memory
Supports Intel® Extreme Memory Profile (XMP)
* Please refer to www.msi.com for more information on compatible memory.
Expansion Slot 1x M.2 slot (Key E)
• Supports Wi-Fi & BlueTooth card
Onboard Graphics
1x HDMI 2.1 with HDR port, supports a maximum
resolution of 4K 60Hz*/**
1x DisplayPort 1.4 port, supports a maximum resolution of
4K 60Hz*/** (For H610 TI-S01 only)
* Available only on processors featuring integrated graphics.
** Graphics specifications may vary depending on the CPU installed.
SATA Ports 2x SATA 6Gb/s ports (From H610 chipset)
M.2 SSD Slots
1x M.2 slot (Key M)
• M2_1 slot (From H610 chipset)
• Supports up to PCIe 3.0 x4
• Supports 2280 storage devices
Audio Realtek® ALC897 Codec
LAN 1x Realtekl® RTL8111H 1Gbps LAN controller
Power Connectors 1x 4-pin SATA power connector
Internal USB
Connectors
2x USB 2.0 Type-A connectors (From H610 chipset)
• Supports additional 4 USB 2.0 ports
Fan Connectors 1x 4-pin CPU fan connector
Continued on next page

6
Continued from previous page
System Connectors
1x Front panel audio connector
1x System panel connector
1x TPM module connector
1x Serial port connector
1x Touch panel connector
1x LVDS connector
1x Audio Amplifier connector
1x Digital microphone connector
1x FPD brightness connector
1x Panel display switch connector
Jumpers
1x Clear CMOS jumper
1x Panel voltage selection header
1x Backlight inverter voltage selection header
LED Features 4x EZ Debug LED
Back Panel
Connectors
For H610 TI-S03
1x DC IN connector (DC tip size: 6.5 x 2.5 mm)
1x HDMI port
1x Serial port
1x Clear CMOS button
1x LAN (RJ45) port
2x USB 3.2 Gen2 10Gbps Type-A ports
2x USB 3.2 Gen1 5Gbps Type-A ports
2x audio jacks (1 Line out + 1 Mic in)
For H610 TI-S01
1x DC IN connector (DC tip size: 6.5 x 2.5 mm)
1x HDMI port
1x DisplayPort port
1x LAN (RJ45) port
1x USB 3.2 Gen2 10Gbps Type-A port
1x USB 3.2 Gen2 10Gbps Type-C port
2x USB 3.2 Gen1 5Gbps Type-A ports
2x audio jacks (1 Line out + 1 Mic in)
Continued on next page

7
Continued from previous page
I/O Controller NUVOTON NCT6687-R Controller Chip
Hardware Monitor
CPU/ System/ Chipset temperature detection
CPU/ System speed detection
CPU/ System speed control
Form Factor Mini-ITX Form Factor
6.7 in. x 6.7 in. (17.0 cm x 17.0 cm)
BIOS Features
1x 128 Mb flash
UEFI AMI BIOS
ACPI 6.2, SMBIOS 3.2
Multi-language

8
Back Panel Connectors
1 2 3 4 8 96
Item Description
1 DC IN connector (DC tip size: 6.5 x 2.5 mm)
2HDMI port
3 Serial port
4 Clear CMOS button
5 USB 3.2 Gen 2 10Gbps Type-A ports
6 1 Gbps LAN ports
7 USB 3.2 Gen 1 5Gbps Type-A ports
8 Mic-in
9 Line-out
5 7
H610 TI-S03

9
1 2 3 4 7 8
Item Description
1 DC IN connector (DC tip size: 6.5 x 2.5 mm)
2HDMI port
3 DisplayPort port
4 1 Gbps LAN ports
5 USB 3.2 Gen 2 10Gbps Type-A & Type-C ports
6 USB 3.2 Gen 1 5Gbps Type-A ports
7 Mic-in
8 Line-out
56
H610 TI-S01
LAN Port LED Status Table
Link/ Activity LED
Status Description
Off No link
Yellow Linked
Blinking Data activity
Speed LED
Status Speed
Off 10 Mbps
Green 100 Mbps
Orange 1 Gbps

10
BAT1
CPU_FAN1
Process
Socket
PWR_SEL1
BKLT_SEL1
JLVDS1
JCONV1
JPANELSW1
JHDDPWR1
JCOM1
JFP1
JTOUCH1
CNVI_1
SATA6 SATA5
JTPM1 JDMIC1 JUSB2 JUSB1 JAUD1
JAMP1
M2_1
DIMMA1
JBAT1
DIMMB1
Overview of Components

11

Important
 Always unplug the power cord from the power outlet before installing or removing
the CPU.
 Please retain the CPU protective cap after installing the processor. MSI will deal
with Return Merchandise Authorization (RMA) requests if only the motherboard
comes with the protective cap on the CPU socket.
 When installing a CPU, always remember to install a CPU heatsink. A CPU heatsink
is necessary to prevent overheating and maintain system stability.
 Confirm that the CPU heatsink has formed a tight seal with the CPU before booting
your system.
 Overheating can seriously damage the CPU and motherboard. Always make sure the
cooling fans work properly to protect the CPU from overheating. Be sure to apply an
even layer of thermal paste (or thermal tape) between the CPU and the heatsink to
enhance heat dissipation.
 Whenever the CPU is not installed, always protect the CPU socket pins by covering
the socket with the plastic cap.
 If you purchased a separate CPU and heatsink/ cooler, Please refer to the
documentation in the heatsink/ cooler package for more details about installation.
 This motherboard is designed to support overclocking. Before attempting to
overclock, please make sure that all other system components can tolerate
overclocking. Any attempt to operate beyond product specifications is not
recommended. MSI® does not guarantee the damages or risks caused by inadequate
operation beyond product specifications.
CPU Socket
Introduction to the LGA1700
CPU
The surface of the LGA1700 CPU has
four notches and a golden triangle to
assist in correctly lining up the CPU for
motherboard placement. The golden
triangle is the Pin 1 indicator.

12
Installing a Processor

https://youtu.be/KMf9oIDsGes
1
2
3
6
4
57
8
9

13
SO-DIMM Slots
Please install the memory module into the SO-DIMM slots as shown below.
1. Locate the SO-DIMM slot. Align the notch on the SO-DIMM with the key on the slot
and insert the SO-DIMM into the slot.
2. Push the SO-DIMM gently downwards until the slot levers click and lock the SO-
DIMM in place.
1
2

Important
 You can barely see the golden finger if the SO-DIMM is properly inserted into the
SO-DIMM slot.
 To uninstall the SO-DIMM, flip the slot levers outwards and the SO-DIMM will be
released instantly.

14
M2_1: M.2 Slot (Key M)
Please install the M.2 SSD into the M2_1 slot as shown below.
1. Move and fasten the M.2 standoff to the appropriate position for your M.2 SSD,
2. Insert your M.2 SSD into the M.2 slot at a 30-degree angle.
3. Secure the M.2 SSD in place with the supplied M.2 screw.
30º30º
2
3
1
Supplied
M.2 screw
M.2
standoff

15
CNVI_1: M.2 Slot (Key E)
Please install the Wi-Fi module into CNVI_1 slot as shown below.
1. Insert your M.2 wifi card into the M.2 slot at a 30-degree angle.
2. Secure the M.2 wifi card in place with the supplied M.2 screw.
30º
30º
2
1
Supplied
M.2 screw
JCOM1: Serial Port Connector
This connector allows you to connect the optional serial port with bracket.
Pin Signal Name Pin Signal Name
1 DCD 2 SIN
3 SOUT 4 DTR
5 Ground 6 DSR
7 RTS 8 CTS
9 RI 10 No Pin
1
2 10
9

16
SATA5~6: SATA 6Gb/s Connectors
These connectors are SATA 6Gb/s interface ports. Each connector can connect to one
SATA device.

Important
 Please do not fold the SATA cable at a 90-degree angle. Data loss may result during
transmission otherwise.
 SATA cables have identical plugs on either sides of the cable. However, it is
recommended that the flat connector be connected to the motherboard for space
saving purposes.
SATA5
SATA6
JHDDPWR1: SATA Power Connector
This connector is used to provide power to SATA devices.
1
Pin Signal Name Pin Signal Name
1 VCC5 2 Ground
3 Ground 4 +12V

17
JFP1: Front Panel Connectors
The JFP1 connector controls the power on, power reset, and the LEDs on your PC
case/chassis. Power Switch/ Reset Switch headers allow you to connect power button/
reset button. Power LED header connects to LED light on the PC case, and HDD LED
header indicates the activity of the hard disk.
1
2 10
9
Power LED
Reserved
Power Switch
Reset SwitchHDD LED

Important
Please note that Power LED and HDD LED have positive and negative connection,
you need to link up the cable to the corresponding positive and negative port on the
motherboard. Otherwise, LEDs won’t work properly.
JAUD1: Front Audio Connector
This connector allows you to connect audio jacks on the front panel.
1
2 10
9
Pin Signal Name Pin Signal Name
1 MIC L 2 Ground
3 MIC R 4 NC
5 Head Phone R 6 MIC Detection
7 SENSE_SEND 8 No Pin
9 Head Phone L 10 Head Phone Detection

18
JDMIC1: Digital Microphone Connector
This connector is used to connect to the digital microphone.
1
1
Pin Signal Name Pin Signal Name
1 AMP_L- 2 AMP_L+
3 AMP_R+ 4 AMP_R-
JAMP1: Audio Amplifier Connector
The JAMP1 is used to enhance audio performance by connecting audio amplifiers.
Pin Signal Name Pin Signal Name
1 VCC3 2 DMIC_DATA
3 DMIC_CLK 4 Ground