MT ELEMENT 2 User manual

Rotary tattoo machine ELEMENT 2
Congratulations on your purchase of MT Mustang Tattoo equipment!
ELEMENT 2 is a fast, lightweight, reliable rotary machine, compatible with a wide range of cartridges and
needles.
Constantly improving the experience of developers and dialogue with the masters allows to achieve the perfect
balance of accuracy, ergonomics and high quality. The machine is completely ready for work! For proper
operation with the machine, carefully read the instructions!
The package includes a tattoo machine, technical grease oil, warranty card, instructions, storing cover..
Using: the universal ELEMENT 2 tattoo machine is intended for drawing a contour, a shade, shadows.
.
Performance data
Engine 6-12 V
Optimal voltage 5-7 V
Power plug - RCA
Needle stroke 4.3 mm
Weight 120 g
Important security measures
The machine is intended for professional use only by tattoo artists. The manufacturer is not responsible
for the improper operation of the equipment and its parts, also for non-compliance with sterilization and
disinfection standards
Use disposable cartridges, tips, needles. Before and after use, wipe the machine with a disinfectant
Be sure to use barrier protection for the machine, power supply and cord clip.
Always use disposable gloves during the session.
Stable power is responsible for the safety
and quality of the result. We recommend
using wires with a cross section of at least
0.75 mm, power supplies with an output
current of at least 3A.
1
1 –RCA plug
2 –Engine
3 –Pin (pusher)
4 –Pinch roller
5 –Collet nut
2
3
5
4

Care and maintenance
Disinfection of the holder, assembling and disassembling of the machine should be carried out with
disposable gloves. Before changing the needle or cartridge, disconnect the machine from the power
supply.
It is recommended to carry out troubleshooting and replacement work at a service center. More
information about service and maintenance can be found on the website http://mustang-tattoo.ru/. As
part of the warranty, repairs are provided free of charge.
We recommend regular lubrication of parts. To do this, use the oil from the kit. The use of other oils may
cause blockage and / or shorten the life of the machine.
Do not sterilize machines in an autoclave or a dry oven!
Non-disposable holders should be pre-sterilized in alaminol, and in dry oven or autoclave after.
Warranty
The warranty for the case (corpus) is 5 years, for the working parts of the machine (engine, welding, power
plugs, lock) - 1 year.
Attention! The official warranty starts after registration on the website http://mustang-tattoo.ru/guarantee. You
must register within 30 days of purchase.
This warranty covers factory faults, but does not cover to the wear and tear of equipment and its parts as a
result of proper or improper use.
Warranty cases
RCA plug doesn’t properly work;
Pusher doesn’t work (broken);
failure of a screw or thread in the fasteners of housings, motors and internal mechanisms of rotary
machines;
Warranty exclusions:
problems after aggressive non-alcohol antiseptic agents;
machines with signs of falling, hitting the case and its components;
machines with rust or processing;
machine with signs of self-adjustment, modernization;
if foreign things, liquids or dirt get inside the mechanism
And also the warranty is terminated in case of:
misuse of equipment;
exceeding the maximum operating voltage;
sterilization in an autoclave or dry oven.
Service Center Contacts:
Russia,Moscow, Narodnaya str., 14/1, tel. [phone]
[e-mail]
www.mustang-tattoo.com