Defender VECTOR User manual

revolution in the industry
of permanent makeup
Wireless
device
VECTOR

Defenderr is the first company to develop
and to release a wireless PMU device
with a built-in interchangeable needle
stroke mechanism.
VECTOR has everything a PMU artist dreams
of—a versatile and manoeuvrable device,
which can be fully adjusted to work with
any technique very easily.
Engine
In the core of the device there is an
innovative new-generation engine developed
specifically for Defenderr. Because of it
the work of the device is smooth, accurate
and silent.
The engine is reliably protected from
overload, short circuit and overheating
when working for a long time.
Voltage
4 - 12 V
adjustable directly on the device

Mobility and comfort
Choosing a wireless device, you expand
your capabilities, freeing yourself from
wires and the restrictions associated
with them.However, the device can operate
not only from a baery, but also from
a standard unit through an additional
adapter with an RCA connector.
Continuous baery life: ≈ 5 hours,
depending on the selected voltage and
needle stroke.
The included extra baery allows
to switch very quickly, doubling
the baery life.
The baery charges in 2 hours
via a standard universal USB Type-C
clip cord.

Built-in eccentric
The VECTOR device combines three
devices in one, because it is equipped with
7 interchangeable eccentrics, which could
be switched easily on the maniple.
A short needle stroke will work perfectly
with high coverage coloring and linear
technique; the medium stroke is suitable
for powder and air spraying, while the long
stroke allows you to work with deeper
layers to make taoos or work
with thicker skin.

Ergonomic body
The device is designed based on the
requirements of the leading artists.
The device has almost no vibration, sits
comfortably in the hand and has an
anti-slip coating. Removable baery fits
tightly and securely to the maniple
for stable contact.
Despite the fact that the device is heavier
due to powerful filling, it is quite
comfortable to hold it: the center
of gravity is perfectly balanced so that
the master does not feel any pressure
during work.
VECTOR is a collapsible device that
is subject to service maintenance
and replacement of all its parts in case
of breakage.

Easy navigation
VECTOR is equipped with a new generation
processor that provides flawless control.
The LED display responds to your touch
instantly, allowing you to adjust
the power of the device comfortably.
Baery indicator.
Timer for calculating working time,
which can be paused.
Jump-start function (for working
with hard taoo cartridges).

Control
Holding down the power buon turns
the device on and o.
A quick double-click on the power buon
turns the Jump-start feature on and o.
Voltage
decrease
Voltage
increase
Baery
indicator
Power
buon
Adjustment step 0,1 V
Short press of the central
buon - pause.

Needle stroke adjustment
*puing the device on hold
beforehand is recommended
Needle stick-out adjustment
1
2
1
2

Specifications
Lengt
Adjustable needle
hang out
Weight
Motor power
Rotational
speed
Voltage
Weight with box
Equipment
Box size
Warranty and
maintenance
service
123 mm
2.4 2.7 3.0 3.3
3.6 3.9 4.2 mm
188 g
8 V
6.500 rpm
4 — 12 V
496 g
device,
2 baeries
RCA adapter
RCA clipcord,
charging cable
16.6 × 11.1 × 7.1 cm
1 year

Designed in the USA
Сolors Stealth, Gunmetal,
Chromium, Baby Blue

Baery
Capacity
Type
Charging time
Baery life
Charger
Safety
1500mAh
polymer
lithium
2 hours
≈5 hours
DC 5V/2A (Type-C
USB cable)
protection from short
circuit, overcharging
and overdischarging

Equipment
Device, 2 baeries, RCA adapter
RCA clipcord, charging cable,
Friction Stabilizing O-Ring.

2
4
5
8
9
7
1
3
10
1
2
Swivel holder
3
Cartridge slot 8
Charging USB Type-C
9
Repair kit
10
Friction Stabilizing O-Ring
4
RCA slot
Warranty card
5
RCA adapter
6
RCA clip cord
Baery
7
6

Installing the baery
1
3
2

Detaching the baery
1
2
3

Installing the RCA adapter
1
3
2

Detaching the RCA adapter
1
3
2

Features
Machine will start with previously
adjusted Voltage.
Charging bar will appear and run when
is charging.
TIMER start to working when machine is
running and colon is blinking as well,when
the unit is paused or stopped,TIMER will be
paused or stopped,Timer record will be
cleaned when the unit is turned o.
Both for wire and wireless, when
is power o you can aach RCA adaptor
connect with RCA cord to continue
working.
The unit will automatically switch
o if no output for 5 minutes.
Pls load needle at the unit was
paused,dont aach needle
when machine is running.

Error remind
E1: The display shows E1 which is short
circuit protection.Restart the unit to run
agian. If it cannot be activated, please
switch the baery pack to another pen to
check is it working. If it does not work, pls
replace another baery pack. If it can work
properly, it will be motor problem.
E2: The display shows E2 which
is overcurrent protection. Please open the
taoo pen to check if the motor is stuck
or damaged,and check the hardness of
needle,replace a soft needle to try again.
E3: The display screen shows E3 means
charging failure, please replace the
charging cord or charger.

Warranty
Device will be covered by a 1-year warranty
from the date of purchase.
Exclusions: The warranty does not
coverage extend to damage caused by
misuse, abuse, unauthorized modification,
improper storage conditions, lightning,
or natural disasters. The warranty does not
cover parts that are subject to normal wear
and tear, such as power cords.
The warranty covers factory
faults and does not apply in the
following cases
The device was damaged due
to aggressive non-alcoholic antiseptics.
The device was damaged due
to mechanical damage, falling and hiing
a hard surface.
The device has signs of corrosion.
The device was used for improper
purposes (i.e. not for permanent make-up
and taooing).
The device was completely immersed
in alcohol or any other liquid.
The device was immersed in an
autoclave, oven or ultrasonic bath.