Multibrackets M User manual

M Motorized Projection Screen

1a 1b
2a
2b
Installation

1
2 3
IMPORTANT:
PLEASE ROLL UP THE PROJECTION SCREEN AFTER USE
Operation

Drop adjustment
b
a
1 clockwise adjustmentturn enlarges thetop
drop by approximately1cm
1 counterclockwise adjustmentturn shortens the
top drop byapproximately 1cm

1. Disconnect your M Motorized Projection Screen from the electricity power
supply.
2. Slightly press the "Down" button on the wall receiver for 5-6 seconds.
3. Connect your M Motorized Projection Screen to the electricity power supply.
4. Slightly press the "Up" button.
5. Press any key of the remote control pointing it at the wall receiver.
6. The clicking sound ensures that your remote control and wall receiver are
now synchronized.
Remote & Wall Receiver Synchronization
Please follow the steps below to synchronize your remote
control and wall receiver.