Multitech MultiModem ZBA USB MT5634ZBA-USB User manual

MultiModem®USB
56K Data/Fax Modem with USB
MT5634ZBA-USB
Quick Start Guide

MultiModem USB Quick Start Guide
MT5634ZBA-USB
P/N 82084554 Rev E
Copyright
This publication may not be reproduced, in whole or in part, without prior
expressed written permission from Multi-Tech Systems, Inc. All rights
reserved. Copyright © 1998-2007 by Multi-Tech Systems, Inc.
Multi-Tech Systems, Inc., makes no representation or warranties with respect
to the contents hereof and specifically disclaims any implied warranties of
merchantability or fitness for any particular purpose. Furthermore, Multi-Tech
Systems, Inc., reserves the right to revise this publication and to make
changes from time to time in the content hereof without obligation of Multi-
Tech Systems, Inc., to notify any person or organization of such revisions or
changes. Check MultiTech’s web site for current versions of our product
documentation.
Revision Date Description
D 05/11/07 Updated tech support contact list
E 12/28/07 Updated tech support contact list
Trademarks
Registered trademarks of Multi-Tech Systems, Inc. are as follows: Multi-Tech,
MultiModem, and the Multi-Tech logo. Windows and Windows NT are
registered trademarks of Microsoft. Any other brand names mentioned in this
publication are trademarks or registered trademarks of their respective
companies.
Technical Support
Country By Email By Phone
Europe, Middle East, Africa: [e-mail] +(44) 118 959 7774
U.S., Canada, all others: [e-mail] [phone]
+[phone]
World Headquarters
Multi-Tech Systems, Inc.
2205 Woodale Drive
Mounds View, Minnesota 55112 U.S.A.
[phone] or [phone]
U. S. Fax [phone]
Technical Support [phone]
Internet Address: http://www.multitech.com.

MT5634ZBA-USB Quick Start Guide
3
Introduction
This Quick Start Guide will help you install and set up your
MultiModem USB. The User Guide can be found on the
MT5634ZBA-USB CD.
The MultiModem USB Package Contains:
• An MT5634ZBA-USB data/fax modem
• One set of four self-adhesive plastic feet
• One modular telephone cable
• One USB cable
• This Quick Start Guide
• One product CD
You Supply
• A computer with an available USB port
• A nearby telephone line jack
Safety Warnings
• Use this product only with UL- and CUL-listed computers.
• To reduce the risk of fire, use only 26 AWG (.41mm) or
larger telephone wiring.
• Never install telephone wiring during a lightning storm.
• Never install a telephone jack in a wet location unless the
jack is specifically designed for wet locations.
• Never touch uninsulated telephone wires or terminals
unless the telephone line has been disconnected at the
network interface.
• Use caution when installing or modifying telephone lines.
• Avoid using a telephone during an electrical storm; there
is a risk of electrical shock from lightning.
• Do not use a telephone in the vicinity of a gas leak.
•This product must be disconnected from its power source
and telephone network interface when servicing.

MT5634ZBA-USB Quick Start Guide
4
Step 1: Assemble the Modem
The only assembly required is to mount the feet on the
bottom of the modem. Simply peel the four self-adhesive
plastic feet off the backing strip and press them into the
recesses on the bottom of the modem.
Step 2: Connect the Modem to Your System
Place the modem in a convenient location. Connect it to your
PC’s USB port, the phone line, and, optionally, to your
phone.
USB Connection
Plug one end of the USB cable into the USB connector
on the modem, and the other end into a USB port on
your computer.

MT5634ZBA-USB Quick Start Guide
5
Line Connection
Plug one end of the phone cable into the modem’s LINE
jack, and the other end into a phone line wall jack.
Note: The LINE jack is not interchangeable with the
PHONE jack. Do not plug the phone into the LINE jack
or the line cable into the PHONE jack.
Note: The FCC and Industry Canada impose certain
restrictions on equipment connected to public telephone
systems. See the Appendix in the MT5634ZBA-USB
User Guide.
Phone Connection (Optional)
For voice-only calls, you can optionally plug a telephone
into the modem’s PHONE jack.
Step 3: Install the Modem Driver
The MultiModem USB is compatible with Windows XP,
Windows 2000, Windows ME, and Windows 98.
Installation in Windows XP
1. Power up your Windows XP system.
2. If you have not already done so, make all the necessary
connections, including connecting the modem to an
available USB port.
3. Insert the MultiModem USB CD into your CD drive.
4. Windows will detect that the new modem is present and
launch the Update Device Driver Wizard dialog box.
5. Choose Install from a list or specific location
(Advanced), and click Next.
6. Select Don’t Search. I will choose the driver to install,
and click Next.

MT5634ZBA-USB Quick Start Guide
6
7. Click the Have disk button. Browse to x:\Drivers\WinXP.
Select the file there and click OK. (x denotes the drive
letter of your CD drive).
8. When the pop-up window comes up explaining that the
driver is not digitally signed, click Continue anyway to
finish the installation.
NOTE: This Microsoft operating system searches for a
digital signature when you install any new hardware. If a
"Digital Signature Not Found" screen appears, simply
click the YES button to continue installation. Although
Multi-Tech submits all eligible products to Microsoft for
certification, the turn-around time is subject to many
factors. Not having a digital signature does not affect
product performance in any way.
Installation in Windows 2000
1. Power up your Windows 2000 system.
2. If you have not already done so, make all the necessary
connections.
3. Windows will detect that the new modem is present,
indicate that it's in the process of installing, and then
launch the Found New Hardware Wizard. The
Welcome screen appears first. Click Next.
4. The Install Hardware Device Drivers screen appears
indicating that the wizard will install the hardware device
drivers. Verify that the Search for a suitable driver for
my device (recommended) is selected, and then click
Next.
5. The Locate Driver Files screen appears asking where
you want Windows to search for driver files.

MT5634ZBA-USB Quick Start Guide
7
Verify that the Specify a location option is the only one
selected, place the MultiModem USB CD into your CD
drive, and click Next.
6. The next screen will say Insert the manufacturer’s
installation disk into the drive selected. Click OK.
Click the Browse button (when prompted to insert a disk
into drive A:\, click Cancel). Navigate to
x:\Drivers\Windows 2000. Select the file and click OK.
(x denotes the drive letter of your CD drive).
7. Then the Driver Files Search Results screen appears
indicating that Windows has found the proper driver on
the CD. Click Next to install the selected driver.
8. The Digital Signature Not Found dialog box is
displayed. Click Yes to continue with the installation. See
the digital signature note on the preceding page.
9. A Copying Files screen appears briefly. After the files
have been copied to your PC, a Found New Hardware
Wizard screen appears indicating that Windows has
finished installing the driver. Click Finish to complete the
installation and exit the wizard.
After installation is complete, you should test the operation of
your new MultiModem USB by registering it. Key in the URL
given below and follow the on-line instructions at:
http://www.multitech.com/register

MT5634ZBA-USB Quick Start Guide
8
Installation in Windows ME
Windows ME driver files are installed in two groups, as
described below. The installation wizard begins by installing
certain driver files. At that point, Windows ME detects the
modem as a new device. Then the installation wizard runs
again to install the remaining driver files.
1. Power up your Windows ME computer.
2. If you have not already done so, make all the necessary
connections.
3. Place the MultiModem USB CD into the CD drive of your
PC. Windows ME will detect that the new modem is
present and launch the Add New Hardware Wizard
screen. This message then displays: “What would you
like to do?”
Choose Specify the location of the driver (Advanced)
and click Next.
4. At the Add New Hardware Wizard “Windows will search
for new drivers...” screen, uncheck the “Removable
Media” button (if necessary) and check “Specify a
location.”
5. Click the “Browse” button and navigate to the “Windows
ME” subfolder of the “Drivers” folder on the MultiModem
USB CD. Click OK. Click Cancel if it prompts you for a
floppy disk.
6. On the Windows driver file search screen click Next.
7. Transient progress screens will appear while files are
being copied. After the files have been copied to your
PC, an Add New Hardware Wizard screen will appear
indicating that Windows has finished installing this the
first of two drivers.
Click Finish to complete the installation of this first driver.
The wizard will close.

MT5634ZBA-USB Quick Start Guide
9
8. Windows ME will now detect an “Unknown Device” and
begin another Add New Hardware Wizard, again asking
“What would you like to do?”
Choose “Specify the location of the driver (Advanced)”
and click Next.
9. At the next screen (the Windows will search for new
drivers screen), uncheck the “Removable Media” button
(if necessary) and check “Specify a location.” Click Next.
10.Transient screens will appear while files are being
copied.
The Windows driver file search screen appears. Click
Next.
11. After files are copied, a completion screen appears.
Click Finish to complete the installation of this the
second driver. The wizard will close.
12. Remove the MultiModem USB CD from the computer’s
CD drive.
13. Test the operation of your modem by registering it online
at http://www.multitech.com/register.
Installation in Windows 98
1. Power up your Windows 98 system.
2. If you have not already done so, make all the necessary
connections.
3. Insert the MultiModem USB CD into your CD drive.
4. Windows will detect that the new modem is present and
launch the Add New Hardware Wizard. The first screen
indicates that the wizard will search for a USB driver.
5. The message What do you want Windows to do? displays.
Verify that the Search for the best driver for your device
(Recommended) option is selected and click Next.

MT5634ZBA-USB Quick Start Guide
10
6. The message Windows will search for a new driver
displays.
Verify that the CD-ROM drive option is selected. Click
Next.
7. The Add New Hardware Wizard dialog box indicates that
Windows has found an updated driver for this device.
Verify that the Updated driver (Recommended) option is
selected and click Next.
8. The Wizard dialog indicates that Windows will select the
proper driver from the MultiModem USB CD and verify
the information. Click Next to install the selected driver.
9. After the files are copied to your PC, the Wizard screen
appears indicating that Windows has finished installing
the driver. Click Finish and exit the wizard. The TR LED
on your modem will light when the installation is
complete. Remove the CD from the computer.
After the installation is complete, you should test the
operation of your new MultiModem USB by registering it.
Key in the URL given below and follow the instructions:
http://www.multitech.com/register
Step 4: Country Configuration with Global Wizard
Different countries have different requirements for how
modems must function. Therefore, before you use your
modem, you must configure it to match the defaults of the
country in which you are using it. You can use one of two
configuration methods:
•Using the Global Wizard to Configure Your Modem
•Using AT Commands to Configure Your Modem (see
the User Guide)