Murata Type2EG BLE User manual

Copyright © Murata Manufacturing Co., Ltd. All rights reserved. 2022
Type2EG EVK User Guide, 9/13/2022 Page 1of 5 www.murata.com
Revision History
Revision
Date
Change Description
1.0
04/25/2022
Initial version
1.1
8/5/2022
Update with new EVK info
1.2
9/12/2022
Update with new EVK info
Type2EG
EVK User Guide
BLE EVK

Copyright © Murata Manufacturing Co., Ltd. All rights reserved. 2020
Type2EG EVK User Guide, 9/13/2022 Page 2of 5www.murata.com
Table of Contents
REVISION HISTORY.............................................................................................................................................................. 1
TABLE OF CONTENTS ......................................................................................................................................................... 2
1INTRODUCTION............................................................................................................................................................3
1.1 Scope......................................................................................................................................................................... 3
1.2 Audience ....................................................................................................................................................................3
1.3 Kit Contents................................................................................................................................................................3
2DESCRIPTION...............................................................................................................................................................4
3POWER UP....................................................................................................................................................................4
4EVALUATION ................................................................................................................................................................ 5

Copyright © Murata Manufacturing Co., Ltd. All rights reserved. 2022
Type2EG EVK User Guide, 9/13/2022 Page 3of 5www.murata.com
1 INTRODUCTION
1.1 Scope
This document provides the setup instructions for the Murata Type2EG BLE Evaluation Kit (EVK).
Figure 1 Type2EG Evaluation Kit
1.2 Audience
This document is intended for software/firmware, hardware and systems engineers to evaluate and
develop applications with Murata’s Type2EG BLE module.
1.3 Kit Contents
The Murata Type2EG EVK package contains the following items:
•1 Type2EG evaluation board
•1 USB cable
JTAG
Power and UART
Type2EG
SW
1
Reset
1
LEDs
Battery socket

Copyright © Murata Manufacturing Co., Ltd. All rights reserved. 2022
Type2EG EVK User Guide, 9/13/2022 Page 4of 5www.murata.com
2 DESCRIPTION
The EVK is an evaluation and application development kit for the Murata Type2EG BLE module. It
mainly includes a Murata Type2EG module and a programming chip. It is similar to OnSemi’s RSL15
evaluation board (EVB).
Note: All the evaluation and test procedures on the original RSL15 EVB can be used on the
Type2EG EVK.
The only difference from the RSL15 EVB is the way of doing conducted test. The follow table and
picture show the components for antenna configuration. Modify the board using the “Onboard
antenna” line in below table to select the onboard antenna, or “uFL connector” line for RF conducted
test.
Selection
R5
C15
C16
L1
Description
Onboard antenna
open
open
1.2pF
1.6pF
Default configuration
u.FL connector
0Ω
open
open
open
RF testing usage
3 Power up
The initial software flashed on the module may be the blinky sample application, which may behave
as below.
•Connect the USB cable to a PC or insert a BR2032 (or CR2032) battery

Copyright © Murata Manufacturing Co., Ltd. All rights reserved. 2022
Type2EG EVK User Guide, 9/13/2022 Page 5of 5www.murata.com
•The LEDs will blink rapidly
•Press the SW1 button, the LEDs will stop blinking
•Press the SW1 button again, the LEDs will restart blinking
4 Evaluation
To do other evaluation or tests, follow OnSemi’s documentation.
The RSL15 EVB’s user manual (including power consumption measurement, schematics, etc.) can
be found at OnSemi’s portal:
https://www.onsemi.com/design/tools-software/evaluation-board/rsl15-evb.
More product info (documentation package, software development IDE, RF tools, etc.) can be found
at:
https://www.onsemi.com/rsl15.