Mustee 360.100 User manual

E.L. Mustee & Sons, Inc.
5431 West 164th St.
Brook Park, OH 44142
Phone: [phone]
Fax: [phone]
Email: [e-mail]
Web: www.mustee.com
READ ALL INSTRUCTIONS CAREFULLY AND INSPECT PRODUCT
FOR DAMAGE BEFORE STARTING YOUR INSTALLATION.
Model:
360.100
Installation Instructions
ENTRY RAMP
Included in Carton
Tools Required
TUB SURROUND
ADHESIVE
12"
1 4"
/
7 8"
/
60"
ADA
DESIGNED PRODUCT
Meets ICC A117.1-2017 Standard
Step 1
SILICONE
ADHESIVE
OR STAINLESS STEEL
OR
DECK SCREWS
OPTIONAL
TOOLS
Turn Entry Ramp upside down and apply an 1/8" bead of
adhesive along each rib and front edge as shown.
The surface of your Entry Ramp may be cleaned with a mild soap solution in warm water using a
soft cloth. When using a cleaner product, carefully read the label to ensure that the cleaner is safe for use on
the material. Stubborn stains can be cleaned using “Soft Scrub®” by Clorox® or a powdered detergent such
as “Spic-n-Span ” or a bleach solution – follow bleach manufacturers recommended procedures pertaining to
safety, handling and use of their product. Do not allow cleaners to sit or soak on the surface. Wipe surface
clean and rinse completely with water immediately after cleaner application. Rinse and dry any overspray on
nearby surfaces. Never use abrasive scouring powder or steel wool pads, as they will scratch the surface.
CARE & CLEANING

Set Entry Ramp in place in front of your
Mustee Barrier Free Shower Floor.
Press down and wipe away any
excess adhesive that may seep out.
INSTALLATION QUESTIONS
Questions on the installation or missing parts, call 216-267-3100 or e-mail [email protected] for
assistance. Hours of operation are Monday to Friday, 8:30 a.m. to 4:30 p.m. E.S.T.
Please have the installation manual available when calling.
DO NOT RETURN PRODUCT TO THE PLACE OF PURCHASE.
Step 2
OPTIONAL
Predrill 6 holes ( 3 per side) along side edges to mechanically fasten
the Entry Ramp in addition to the adhesive.
Apply silicone into holes before screws.
Do not over tighten screws to avoid cracking.
Wipe away any excess silicone.
Step 3
Cover top surface of Entry Ramp and apply weights
until adhesive cures.
ACCESSORY
An optional Collapsible Water Barrier Kit (PN 360.210) is available to help retain water from spashing
out onto floor.
Preferred by the“Pros”
SI-172 (09-22)
Made and Printed in U.S.A.
W
e
i
g
h
t
W
e
i
g
h
t
W
e
i
g
h
t
W
e
i
g
h
t