Mustek POWERMUST 636 User manual

Line Interactive UPS
PowerMust 636 (650VA), Line Int.,IEC
PowerMust 848 (850VA), Line Int., IEC
PowerMust 424EG (450VA), Line Int., S huko
PowerMust 636EG (650VA), Line Int.,S huko
PowerMust 848EG (850VA), Line Int.,S huko
PowerMust 1260(1200VA), Line Int., IEC/S huko
PowerMust 1590(1500VA), Line Int., IEC/S huko
PowerMust 2212(2200VA), Line Int., IEC/S huko
Quick Start Guide
EN

Warranty & Service Information
Thanks for buying this Mustek UPS product.
Please follow the instructions in the product manual and if applicable the
software installation manual, to have the maximum use of your product.
Installing the software:
If you products comes with software you will find a CD Rom in the box
containing the software.
Please follow the instructions when installing the software.
You can download the software, manual and short reference manual at the
following site:www.ups-software-download.com
Warranty:
As a manufacturer we provide a minimum of 1 year warranty on our
product.
However for the exact warranty period and the warranty terms you should
contact your reseller as both the warranty period and the terms may vary
per Country / Region.
Problem solving:
Please check the chapter in your manual (hardware and software) on
problem solving.
Additionally:
Please check our website (www. Mustek.eu) regularly for updates of the
software as well as Frequent Asked Questions (FAQ) .
If this not solve your problem please contact your reseller for advice.
Service and Maintenance:
If the product requires service or maintenance in the warranty period
always contact your reseller for the procedures. If outside the warranty
period we advise you the contact your reseller as well. In any case always
make sure that service or maintenance on the product are performed by a
qualified technician.

IMPORTANT SAFETY INSTRUCTIONS
SAVE THESE INSTRUCTIONS – This manual ontains important instru tions for models
PowerMust 636/848/424EG/636EG/848EG/1260/1590/2212 that should be followed during
installation and maintenan e of the UPS and batteries.
•This produ t is spe ially designed for PCs and it is not re ommended for use in any medi al
equipment, life-supporting system and other spe ifi important equipment.
•Do not plug household applian es su h as hair dryers, mi rowave ovens or va uum leaners
to UPS.
•Do not atta h a power strip or surge suppressor to the UPS.
•Do not plug the UPS into its own output.
•Conne tion to any other type of re eptable other than two-pole, three-wire grounded
re epta le may result in sho k hazard as well as violate lo al ele tri al odes.
•To redu e risk of overheating the UPS, do not over the UPS´ ooling vents.
•This unit intended for installation in a ontrolled environment (temperature ontrolled,
indoor area free of ondu tive ontaminants). Avoid installing the UPS in lo ations where
there is standing or running water or ex essive humidity and do not use it in any of the
following environments:
oAny area with ombustible gas, orrosive substan e or heavy dust.
oAny area with extraordinarily high or low temperature (above 40˚C or below 0˚C) and
humidity of more than 90%.
oAny area exposed to dire t sunshine or near any heating apparatus.
oAny area with serious vibrations.
oOutdoor.
•The utility power outlet shall be near the equipment and easily a essible. In the event of
an emergen y, press OFF button and dis onne t the power ord from the AC power supply
to properly disable the UPS.
•The internal short ir uiting of the UPS will lead to dangers su h as ele tri sho k or fire;
therefore do not allow liquids or any foreign obje t to enter the UPS. No water ontainers
(su h as a water glass) or any other liquid- ontaining vessels shall be pla ed on the top of
the UPS so as to avoid su h dangers as ele tri sho k.
•Please do not use the UPS in ex ess of the rated load apa ity.
•Unplug the UPS prior to leaning and do not use liquid or spray detergent.
•Risk of ele tri sho k, do not attempt to disassemble the unit. No user servi eable parts
inside. Refer servi ing to qualified servi e personnel.
•If UPS is to be stored for a long time, it is re ommended to re harge the batteries (by
onne ting the utility power to UPS, swit h “ON”), on e a month for 24 hours to avoid a full
battery dis harge.
•In ase smoke is found oming out from the devi e, please ut off the power supply qui kly
and onta t the distributor.
•The UPS ontains one/two large- apa ity batteries. So the shell shall not be opened,
otherwise su h dangers as ele tri sho k will be aused. If any internal overhaul or
repla ement of the battery is required, please onta t the distributor.
•Servi ing of batteries should be performed or supervised by personnel knowledgeable of
batteries and the required pre autions. Keep unauthorized personnel away from batteries.
•A battery an present a risk of ele tri al sho k and high short ir uit urrent. The following
pre autions should be observed when working on batteries:
oRemove wat hes, rings, or other metal obje ts from the hand.

oUse tools with insulated handles and wear rubber gloves and boots.
oDo not lay tools or metal parts on top of batteries.
oDis onne t harging sour e prior onne ting or dis onne ting batteries terminals.
•When repla ing batteries, repla e with the same type and number of the sealed lead-a id
batteries.
oNever short ir uit batteries. When working with batteries, remove wat hes, rings and
other metal obje ts, and only use insulated tools.
oThe battery must be repla ed ex lusively by qualified personnel (risk of sho k). Prohibit users
from their own battery repla ement. Conta t your reseller if need.
•The maximum ambient temperature rating is 40°C.
•Do not dispose of battery or batteries in a fire. The battery may explode.
•Do not open or mutilate the battery or batteries. Released ele trolyte is harmful to the skin
and eyes. It may be toxi .
•I on Φ on the rating label stands for phase symbol.
•This pluggable type A equipment with battery already installed by the supplier is operator
installable and may be operated by laymen.
•During the installation of this equipment it should be assured that the sum of the leakage
urrents of the UPS and the onne ted loads does not ex eed 3.5mA.
•Attention, hazardous through ele tri sho k. Also with dis onne tion of this unit from the
mains, hazardous voltage still may be a essible through supply from battery. The battery
supply should be therefore dis onne ted in the plus and minus pole of the battery when
maintenan e or servi e work inside the UPS is ne essary.
•In the event that there is fire o urring in the vi inity, please use dry-power extinguishers.
The use of liquid extinguishers may give rise to the danger of ele tri sho k.
This roduct com lies with the safety and environmental regulations in EU.
If the time arises to throw away your produ t, please re y le all the omponents possible.
Batteries and re hargeable batteries are not to be disposed in your domesti waste! Please
re y le them at your lo al re y ling point. Together we an help to prote t the environment.
1. Introduction
PowerMust LED series is an intelligent and ompa t line intera tive UPS (Uninterruptable Power
Supply) whi h is designed to prote t your personal omputer or sensitive ele troni equipments
from all forms of power interferen e, in luding omplete power failures. It is equipped with
many features that allow any atta hed equipment to operate longer and more reliability.
2. Description of Features
•Easy to use and install utilized mi ropro essor ontrol to maximize the reliability and
effi ien y
•Equipped with built-in boost and bu k AVR fun tion
•DC Cold start fun tion
•Auto restart while AC re overy.
•Provides AC Overload prote tion
•RJ11/RJ45 (in/out) LAN/Modem/Phone line prote tion

3. Package Contents
You should have re eived the following items inside of pa kage:
636/848 IEC 424/636/848 EG Schuko 1060/1590/2212
IEC & Schuko
-
UPS
Unit x 1
-Startup manual x 1
-Communi ation able x 1
-Software CD
-IEC output able x2
-
UPS Unit x
1
-Startup manual x 1
-
UPS Unit x 1
-Startup manual x 1
-Communi ation able x 1
-Software CD
-IEC output able x2
-
AC Input Power able x1
4. Product Overview
Front Panel Back Panel
636/
848
424/
636/
848
EG
1260/
1590/
2212
5. Installation and Initial Startup
Before installation, please inspe t the unit. Be sure that nothing is damaged.
I: Placement & Storage Conditions
Install the UPS in a prote ted area that is free of ex essive dust and has adequate air flow
around the unit, and is free from ex essive dust, orrosive fumes and ondu tive
ontaminants. Please pla e the UPS away from other units at least 20 m to avoid

interferen e. Do NOT operate the UPS where the temperature ex eeds 0-40° C and the
humidity is over 0-90 % RH.
II: Connect to Utility and Charge
Plug in the AC input ord to the 2-pole, 3-wire grounded wall outlet. For the best results, we
suggest harging the battery at least 6 hours with no load (no ele tri al devi es su h as
omputers, monitors, rt .) onne ted before initial use. The unit harges its battery while
onne ting to the utility.
III: Connect the Loads
Plug in the loads to output re epta les on the rear panel of the UPS. Simply turn on the power
swit h of UPS unit, and devi es onne ted to the UPS will be prote ted by UPS unit.
Do not atta h a power strip or surge suppressor to the UPS.
IV: Connect LAN cable, Modem or Phone line for Surge Protection
Conne t for example a single modem or phone line into surge-prote ted “IN” outlet on the
ba k panel of the UPS unit. Conne t from “OUT” outlet to the omputer with another phone
line able.
V: Connect USB Cable
To monitor the UPS status, su h as unattended UPS shutdown and start-up, by using
bundled software, please onne t the UPS and PC with USB able in luded.
NEVER onne t a laser rinter or scanner to the UPS unit,
because in-rush current generated by motor’s devices
may ause the damage of the unit.
VI: Turn On/Off the Unit
Turn on the UPS unit by pressing the power swit h. Turn off the UPS unit by pressing again the
power swit h.
6. Audio Indicator
Audible Alarm Situation
Sounding every 10 se onds Battery Mode
Sounding every 1 se ond Battery Low
Sounding every 0.5 se onds Overload
ontinuous sounding Faulty

7. Software Installation on your PC
Conne ted by USB to a PC or notebook, the Software enables ommuni ation between the
UPS and the omputer. The UPS software monitors the status of the UPS, shuts down the
system before the UPS is exhausted and an remotely observe the UPS via the Network
(enabling users to manage their system more effe tively). Upon AC failure or UPS battery low,
UPS takes all ne essary a tions without intervention from the system administrator. In addition
to automati file saving and system shut-down fun tions, it an also send warning messages
via pager, e-mail et .
•Use the bundled CD and follow the on-s reen instru tions to install the software
WinPower.
•Enter the following serial No. to install software: 511C1-01220-0100-478DF2A
•After the software is su essfully installed, the ommuni ation with UPS has been
established and a green i on will appear in the system tray.
•Double- li k the i on to use the monitor software (as above).
•You an s hedule UPS shutdown/start-up and monitor UPS status through PC.
•Detail instru tions please refer to the e-manual in the software.
Che k
http://www.ups
-
software
-
download. om/index.htm
from time to time to get the
latest version of monitoring software.
8. Trouble Shooting
Symptom
Possible Cause
Remedy
No LED display on
the
front panel.
1. Battery weak.
1. Charge battery up to 8 hours.
2. Battery defe t.
2. Repla e with the same type of
battery.
3. Power swit h is not pressed.
3. Press the power swit h again.
Alarm buzzer beeps
ontinuously when AC
supply is normal.
Overload of the UPS.
Verify that the load mat hes the UPS
apability spe ified in the spe s.
When power failure,
ba k-up time is shorten.
1. Overload of the UPS.
1. Remove some non
-
riti al load.
2. Battery voltage is too low.
2. Charge battery 8
hours or more.
3. Battery defe t due to high temperature
operation environment, or improper
operation to battery.
3. Repla e with the same type of battery.
Mains normal but LED is
flashing.
Power ord is loose.
Re onne t the power ord properly.
•If any abnormal situations o ur that are not listed above, Please stop using the unit and
onta t your reseller for advi e.
•When repla ing the batteries, use batteries with exa tly same spe ifi ations.
•The battery must be repla ed ex lusively by qualified personnel (risk of sho k).
Prohibit user repla e battery by oneself. Please onta t your reseller if need.

9. Specifications
Model Com lete Series
424 636 848 1260 1590 2212
CAPACITY
45
0VA/
240W
650VA/360W
85
0VA/480W
1
200VA/
600W
15
00VA/900W
22
00VA/1200W
INPUT
Voltage 220 VAC
Voltage Range 162~268 VAC
OUTPUT
Voltage 220 VAC
Voltage Regulation +/-10% (Battery mode)
Frequen y Range 50/60Hz
Frequen y Regulation
±1Hz (Battery mode)
Transfer Time Typi al 4-8ms
Waveform Modified Sine Wave
PROTECTION
Full prote tion Dis harge, over harge and overload prote tion
ENVIRONMENT
Humidity 0-90 % RH @ 0° to 40° C (non- ondensing)
Noise Level Less than 40dB
Software
Monitoring Software WinPower (in luded)
BATTERY
Type & Number
12V/4.5Ah x1
12V/ 7Ah x1
12V/9Ah x1 12V / 7Ah x 2
12V / 9Ah x 2 12V / 9Ah x 2
Charging Time 6 hours re over to 90% apa ity
Prote tion Overload, dis harge and over harge prote tion
Ba kup Time (est. 100W) 8 min 16 min 20 min 30 min 50 min 50 min
PHYSICAL
LED Indi ator Green LED (AC Mode, Ba kup Mode) Normal, Battery mode, AC mode, Fault mode
Outlet and Conne tor
2-4x outlets, RJ11 Surge Prote tion, USB
port (EG series : no USB port and RJ11)
4-6x outlets, USB port,RJ45 Surge Prote tion
Dimension (DxWxH) 279mm x 100mm x 143mm 365mm x 139mm x 195 mm
WEIGHT
Net weight 3.5kg 4.4kg 5.0kg 8.6kg 10.2kg 10.2kg