My ADT TSSC User manual

For a detailed review of the entire system, please view the TSSC-BASE system manual.
Arm and Disarm
Arm:
To arm in STAY mode when you are not leaving the premises, press [security code] + [STAY].
To arm in AWAY mode when you are leaving the premises, press [security code] + [AWAY].
To arm in MAX mode where both there is no entry delay period, press [security code] + [MAX].
Disarm:
To disarm the system, [security code] + [OFF].
Battery
The TSS operates on the 7.2V Battery Pack.
Quick Guide: TSSC

Loss of AC power and use of backup battery power is indicated by No AC.
A low battery condition is indicated by Low Bat.
For instructions on replacing your battery, please visit our Battery Replacement Page.
Bypassing Protected Areas
Bypassing a zone allows you to arm your system with certain protected areas intentionally unarmed or to
access a protected area when the system is armed.
To bypass a zone, press [security code] + [BYPASS] + [zone number].
To unbypass a zone, disarm the system.
Change Date and Time
To change date and time settings, press [security code] + [#] + [6] + [3].
Wait until time/date are displayed, then press [*] to move the cursor ahead and [#] to move back.
Enter the 2-digit hour and minute settings, i.e., [06] and [17] for 6:17.
Press [1] for PM or [2] for AM.
Continue to enter 2-digit year, month, and day settings, i.e., [15], [08], and [23] for August 8, 2015.
To exit, press [*] when the cursor is on the last digit.
Chimes and Beeps
When your system is in chime mode, a chime alert will sound whenever a protected door/window is opened.
To turn chime mode on and off, press [security code] + [9].
Reset
To clear the display after an alarm event, enter your [security code] + [OFF] to clear the alarm event history.
Security Codes
The TSSC allows for up to 96 additional users. Users are assigned an Authority Level, which defines the
functions a particular user can and cannot perform.
To add a user code, enter your [Master code] + [8] + [new user number] + [new user’s 4-digit code].

To delete a user code, enter your [Master code] + [8] + [user number] + [#] + [0]. A single confirmation
tone will sound.
To assign an authority level, enter your [Master code] + [8] + [user number] + [#] + [1] + [authority
level].
Authority Level
Explanation
Code
Master
Can perform all functions and
assign codes.
[1]
Standard
Can only perform security
function in assigned
partitions.
[0]
Arm Only
Can only arm the system.
[1]
Guest
Can arm the system in
assigned partitions, but
cannot disarm the system
unless the system was armed
with this code. Fitting for
babysitters, cleaners, etc.
[2]
Duress
Intended for use for when
you are forced to arm or
disarm the system against
your will.
[3]
Trouble Conditions
When the system is armed and there is a Trouble Condition, the keypad will display “Device Trouble”.
To view more information on the Trouble Condition, press the [*] key.