
(5) People with malignant tumors, hemophiliac or severe bleeding;
(6) People with skin diseases or infectious diseases should use with caution;
4. Precautions for Use
(1) Plug with ground pin must be used, and power socket that already factually
grounded must be ensured before using the instrument.
(2) To make sure instrument’s voltage is adaptive. If voltage of local power
supply is unstable, we suggest users add voltage regulator with matching
power between the mains supply and the instrument.
(3) To guarantee curative effect and normal service life of the instrument, please
uniformly use specified parts provided or suggested by original manufacturer.
(4) The instrument can’t be placed in damp places or near water, and also
can’t be exposed to direct sunlight.
(5) Don’t place the instrument near a strong heat source since this may affect
its service life and normal use.
(6) Please remove all the metal objects from body before treatment so as to avoid
unexpected situations which may affect curative effect.
(7) Please restrain from using the instrument aiming at eyes, thyroid,
parathyroid, testicles, pregnant woman’s abdomen, pacemaker, etc.
(8) People who are suffering from illness should use with caution unless he
gets permission from a doctor.
(9) Please turn off power switch of the instrument if no one uses it, and ensure main
power is off after someone used it and before he left, thus safety of the
instrument can be guaranteed.
(10) Don't use the instrument with an empty stomach, and wait for at least 1 hour
after a full meal before starting the course for weight reduction.
(11) Operating with the lowest energy level when just started, and increase the level
gradually after client got used to it.
(12) When using this instrument, parts that be treated must be kept moist.
(13) Fasten the belt onto body first, then start the instrument and set the temperature
which should be set from low to high gradually, and be centered on tepidity and
comfortableness.
(14) Using this instrument in accordance with the instructions specified in the manual.
5. Troubleshooting & Solutions
(1) The instrument can’t be started, and there is no response from the remote
control?
A. Check whether the power cord is plugged into a good power socket.
B. Check whether the power cord is tightly inserted.
(2) The remote control is working, but the belt is not heating?