MyPurMist mypurmist free User manual

Quick start guide
Charge the mypurmist device until charge
indicator light is green. Unplug charger. The
device will not operate while plugged in.
Add mypurmist water at the fill port in the back.
Twist the top o the water refill and insert spout
into the water fill port with the refill label facing
you. Squeeze repeatedly until empty. Be careful
not to over fill - stop if water spills at fill port.
Press ON and get instant ultrapure steam
therapy for superb relief! Anywhere, anytime.
Adjust steam temperature to your comfort by
pressing the temperature control button.
1.
2.
3.
4.
Helpful hints
Attach included mypurmist scentpad at the air intake.
Press one reservoir to add soothing
eucalyptus and peppermint aroma. Enjoy!
Device goes into automatic drying mode for 10 min
for self cleaning when turned OFF or when it runs out
of water or battery. No maintenance needed.
mypurmist free is great for the whole family. Use
mypurmist as often as needed. Typical use is two
sessions per day for 15 minutes each.
mypurmist free also works as an air purifier without
making steam. Toggle the temperature control to
white light only for cool purified air.
Download the mypurmist app from Apple®App
Store®or Google Play®Store to optimize your
results. While setting up you will automatically
upgrade from a one-year to a two-year warranty.
A steady red light in the water window on the rear
side means it is out of water. See user manual. mypurmist.com
No power Charging Ready
HEPA
air-purifier ON
ON/OFF button
and battery
level indicator
Temperature
control
(100°-115°F)
Charge indicator light
ChargingCharging
Adding mypurmist water.
Be careful not to over fill.

free
Cordless Ultrapure Steam Inhaler™
Register and upgrade to
two-year warranty!
Use the mypurmist mobile app* or
visit www.mypurmist.com/register
*Apple®App Store®or Google Play®Store
QSG201704-1