Myson Unisenza Plus ETH User manual

Installation
and user manual
Unisenza Plus - Electronic Thermostatic Head
EN
Smart, app
connectivity
Battery
powered
Geo location
5 year
guarantee


EN
Unisenza Plus - Electronic Thermostatic Head
Installation and user manual
Release Date
First release August 2023


EN
Unisenza Plus - Electronic Thermostatic Head
Installation and user manual
Index
1 Safety warnings .....................................................................................................................4
Pictograms used in this manual..............................................................................................4
Purpose of the manual...............................................................................................................4
Intended use...................................................................................................................................4
Safety regulations........................................................................................................................5
2 Technical data .........................................................................................................................6
Unisenza Plus Electronic Thermostatic Head...................................................................6
3 Dimensions..............................................................................................................................7
4 Pack contents..........................................................................................................................7
5 Overview ..................................................................................................................................8
Unisenza Plus Electronic Thermostatic Head...................................................................8
Display icons..................................................................................................................................8
Button usage..................................................................................................................................9
6 Download the APP...............................................................................................................10
7 Nameplate .............................................................................................................................10
8 Installation .............................................................................................................................11
Recommendations for a correct installation .................................................................... 11
Heating system compatibility................................................................................................. 11
Inserting the batteries .............................................................................................................. 12
Installation on standard valve............................................................................................... 13
Installation on Danfoss RA valve ......................................................................................... 14
9 Use ......................................................................................................................................... 15
Main screen operation.............................................................................................................. 15
Power up........................................................................................................................................ 15
Joining to Unisenza Plus Gateway...................................................................................... 16
Valve calibration .........................................................................................................................18
Pairing with other Unisenza Plus device (optional) ......................................................19
Change operation mode........................................................................................................... 21
Change set point in Manual mode ...................................................................................... 22
Temporarily change set point in Schedule mode ......................................................... 22
Off mode with frost protection ............................................................................................. 23
Window open mode ................................................................................................................. 23
Valve protection......................................................................................................................... 23
Alert / Error code....................................................................................................................... 23
10 Maintenance......................................................................................................................... 24
Low battery.................................................................................................................................. 24
Over-the-air (OTA) software update operation .............................................................. 24
Factory reset............................................................................................................................... 24
Cleaning ........................................................................................................................................ 25
11 Manual download and updates........................................................................................ 26
12 Disposal at the end of life .................................................................................................. 26


EN
Unisenza Plus - Electronic Thermostatic Head
Installation and user manual
1 SAFETY WARNINGS
Pictograms used in this manual
To make reading clearer and more enjoyable, three types of symbols have been used
in this manual to convey to the reader the meaning or importance of the information
provided:
Hazard signs. Triangular framed shape. Indicate prescriptions relating to
present or possible dangers.
Prohibition signs. Circular, barred frame. Indicate prescriptions relating to
actions that must be avoided.
Mandatory signs. Full circle. Indicate information that is important to read
and comply with.
Purpose of the manual
The purpose of this manual is to guide the qualified installer the installation, maintenance
and proper and safe use of the equipment.
For this reason, it is mandatory for all personnel involved in the installation,
maintenance and use of the equipment to read this manual.
Contact the Manufacturer if any points are unclear or difficult to understand.
This manual contains information regarding:
• Technical specifications of the equipment;
• Installation and connection instructions.
Intended use
The Unisenza Plus Electronic Thermostatic Head is an electronic thermostatic radiator
valve (TRV) controller with wireless communication function for the replacement of an
existing passive head on the standard TRV in a hydronic heating system. It has the latest
ZigBee 3.0 wireless technology for easy integration with a smart heating solution for
individual radiator controls.
Its features are:
• Built-in dual thermal sensors for accurate temperature control
• LCD display with backlight
• With button for quick set point adjustment
• Support schedule program


EN
Unisenza Plus - Electronic Thermostatic Head
Installation and user manual
• Modulating control algorithm optimizes the energy efficiency and comfort
• Open window detection function for energy savings
• Support standard M30 x 1.5 mm valve connection with optional adaptor to support RA
valve types
• 2xAA batteries operated
Safety regulations
Before proceeding with any installation or use, it is necessary to thoroughly inspect the
product. Make sure that all the information contained in this manual correspond exactly
to the purchased equipment. In the event that differences are identified, it is necessary
to contact the Manufacturer in order to obtain the assistance and specific technical
information necessary to operate.
Read this manual carefully before the installation, use and maintenance of the
product and keep it for any further future consultation by the various operators.
All installation, assembly, electrical connections to the mains and ordinary/
extraordinary maintenance must be performed only by qualified personnel or
technicians complying with the legal requirements.
Installation, use or maintenance other than those specified in the manual
may cause damage, injury or death, invalidate the warranty and relieve the
Manufacturer of all liability.
Disconnect the equipment from the mains before installing or maintaining it.
Do not installthe equipment outdoors.The product has been designed to be installed
indoors, protected from bad weather, in places where the temperature is between
0 and +50 °C.
At the end of the installation it is necessary to instruct the user in the correct use
of the equipment.


EN
Unisenza Plus - Electronic Thermostatic Head
Installation and user manual
2 TECHNICAL DATA
Unisenza Plus Electronic Thermostatic Head
Temperature Scale °C or °F
Temperature display range 0°C - 40°C (32°F - 104°F)
Temperature display resolution 0.5°C (1°F)
Temperature setting range 5°C - 35°C (41°F - 95°F)
Temperature setting resolution 0.5°C (1°F)
Temperature measurement accuracy +/-1°C @ 15-25°C, +/-1.5°C other range
Valve connection M30 x 1.5 mm or M28 x 1.5 mm versions available
Stroke travel 4.0 mm
Firmware update Over the air firmware update capability
Wireless Communication ZigBee 3.0, 2.4GHz
Power Supply 2 x AA-sized Alkaline Batteries
Operating environment Indoor, residential & commercial
Operating temperature 0°C – 50°C
Storage temperature -10°C – 60°C
Operating/Storage humidity 10-95% RH, non-condensing
Dimensions 58(W) x 58(D) x 96(H) mm
Ingress protection rating IP20
Regulation CE, UKCA
Environmental requirement RoHS compliance
The Unisenza Plus Electronic Thermostatic Head complies with the following European directives:
• RED directive 2014/53/EU
• ROHS directive 2011/65/EU
• REACH (EC 1907/2006)
The Unisenza Plus Electronic Thermostatic Head complies with the relevant UK Statutory Instru-
ments:
• Electrical Equipment (Safety) Regulations 2016
• Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment
Regulations 2012 (SI 2012/3032)
• REACH ETC. (Amendment etc.) Regulations 2020 - SVHC


EN
Unisenza Plus - Electronic Thermostatic Head
Installation and user manual
3 DIMENSIONS
95
Ø 58
4 PACK CONTENTS
+
AA
+
AA
abc
a. Unisenza Plus Electronic Thermostatic Head
b. 2 x AA-sized Alkaline Batteries
c. RA Adapter


EN
Unisenza Plus - Electronic Thermostatic Head
Installation and user manual
5 OVERVIEW
Unisenza Plus Electronic Thermostatic Head
1. Display LCD
2. Button
3. Button
4. Button
5. Battery compartment
6. Securing ring
Display icons
Icon Meaning Description
° C
° F
Antenna On: the device is joined to a Unisenza Plus network
Flashing: the device is searching for a Unisenza Plus network
° C
° F
Pairing status On: the device pairs with a room thermostat or a receiver
Flashing: the device is in a pairing process
° C
° F
Heating On
On: the device demands for Heat and the valve is opened by
the Electronic Thermostatic Head actuator
Flashing: the actuator motor is moving to adjust the valve
opening
° C
° F
Schedule mode Schedule mode is running
° C
° F
Off mode Device is in Off mode, frost protection will be running.
° C
° F
Battery icon Shows the battery level
° C
° F
Digits Showing set point * or other information
° C
° F
Key lock Key is locked
° C
° F
Alert It is shown with an error code tell what system fault
° C
° F
Temperature unit Temperature unit in Celsius or Fahrenheit
(*) Display of room temperature option can be provided in the advanced settings on the App.
1
2
3
4
5
6


EN
Unisenza Plus - Electronic Thermostatic Head
Installation and user manual
Button usage
When LCD backlight is Off
Turn on the LCD backlight Press any buttons
When LCD backlight is On
Change mode (Off → Manual > Schedule) Press
Increase set point Press
Decrease set point Press
Fast increase set point Press and hold
Fast decrease set point Press and hold
Key lock or unlock Press and hold and
Confirm set point Press , or wait for 3 seconds timout after a
new set point is set
Join network
(if no network is joined before) Press and hold
Initiate pairing menu
(if already joined a network) Press and hold
Factory reset Press and hold more than 10 seconds
No buttons can be used when the Extremely low battery icon appears.


EN
Unisenza Plus - Electronic Thermostatic Head
Installation and user manual
6 DOWNLOAD THE APP
The management of the Unisenza Plus Electronic Thermostatic Head is also possible through
a dedicated APP that allows its configuration and the management of the devices you will pair.
In order to download the APP, you need to connect to the STORE of your device used for con-
figuration and install the Unisenza Plus.
Or, again using the device, you can directly access the installation page using the following
QR codes, again depending on the operating system.
7 NAMEPLATE
Inside the battery housing of the Unisenza Plus Electronic Ther-
mostatic Head there is a sticker (A) which indicates the device
data.
QR code availability for future feature.
A


EN
Unisenza Plus - Electronic Thermostatic Head
Installation and user manual
8 INSTALLATION
Recommendations for a correct installation
+
AA
+
AA
+
AA
+
AA
0°C
50°C
+
AA
+
AA
Heating system compatibility
The Unisenza Plus Electronic Thermostatic Head is compatible with the majority of thermostatic ra-
diator valves.
When mounting the Unisenza Plus Electronic Thermostatic Head on the Danfoss RA valve,
please use the RA adapter as shown in below picture.


EN
Unisenza Plus - Electronic Thermostatic Head
Installation and user manual
Inserting the batteries
The Unisenza Plus Electronic Thermostatic Head, to work, requires 2 AA alkaline batteries (included
in the package).
Use only and exclusively the batteries indicated by the manufacturer in the table in the "Tech-
nical data" chapter.
When installing the batteries, observe the correct polarity indicated in the battery housing.
Reversing the polarity runs the risk of damaging the electronic regulator.
To insert the batteries proceed as shown.
+
AA
+
AA
1
2
+
AA/LR6
+
LR6/AA
NEW!
1,5
V O LT
ALKALINE
1,5 Volt
Alkaline
+
AA
+
AA
3
+
AA/LR6
+
LR6/AA
4
5


EN
Unisenza Plus - Electronic Thermostatic Head
Installation and user manual
Installation on standard valve
To mount the Unisenza Plus Electronic Thermostatic Head on a standard valve proceed as shown.
12
During assembly, be very careful not to use too much force in tightening the various compo-
nents.
During assembly, if any problems arise, contact the Manufacturer and request assistance.


EN
Unisenza Plus - Electronic Thermostatic Head
Installation and user manual
Installation on Danfoss RA valve
To mount the Unisenza Plus Electronic Thermostatic Head on a Danfoss RA valve proceed as shown.
1
2
3
4
During assembly, be very careful not to use too much force in tightening the various compo-
nents.
During assembly, if any problems arise, contact the Manufacturer and request assistance.


EN
Unisenza Plus - Electronic Thermostatic Head
Installation and user manual
9 USE
Main screen operation
The LCD backlight is Off during stand by in normal operation. Press any key to turn on the LCD
backlight before performing other user operations as descried below. The LCD backlight will be
turned off automatically when no key press for 15 seconds.
When at extremely low battery, is displayed and flashes. All buttons input is not allowed and the
LCD backlight will not turn On. Therefore, below operations cannot be done.
Power up
The ignition of the Unisenza Plus Electronic Thermostatic Head takes place by inserting the batteries
in their housing, which has already been seen in the previous chapters.
Below what appears on the display.
1 Display power up
° C
° F
2 Firmware version installed
° C
° F ° C ° F ° C ° F
3 Preparation for installation
° C
° F ° C ° F The device is ready for
installation.


EN
Unisenza Plus - Electronic Thermostatic Head
Installation and user manual
Joining to Unisenza Plus Gateway
With APP
The association between the Unisenza Plus Electronic Thermostatic Head and the Unisenza
Plus Gateway can be done through the system management APP.
To proceed with the association you need to have already installed and configured the Gateway.
Unisenza Plus
Gateway
Instruction Manual
12
3
°C
°F
>3 SEC
° C
° F
4
°C
°F
Cloud
WiFi
ZigBee
Cloud
WiFi
ZigBee
° C
° F
° C
° F
If you want to associate a Unisenza Plus Electronic Thermostatic Head that was previously
associated with another Gateway, it is necessary to perform a reset to the factory settings of
the electronic regulator before making the new association.


EN
Unisenza Plus - Electronic Thermostatic Head
Installation and user manual
Without APP
The association between the Unisenza Plus Electronic Thermostatic Head and the Unisenza
Plus Gateway can also be made directly between the two devices.
To proceed with the association you need to have already installed and configured the Gateway.
Unisenza Plus
Gateway
Instruction Manual
1
3
UP
Cloud
WiFi
ZigBee
Cloud
WiFi
ZigBee
3 SEC
Cloud
WiFi
ZigBee
2
4
°C
°F
° C
° F
>3 SEC
5
°C
°F
Cloud
WiFi
ZigBee
Cloud
WiFi
ZigBee
° C
° F
° C
° F
If you want to associate a Unisenza Plus Electronic Thermostatic Head that was previously
associated with another Gateway, it is necessary to perform a reset to the factory settings of
the electronic regulator before making the new association.


EN
Unisenza Plus - Electronic Thermostatic Head
Installation and user manual
Valve calibration
When the Unisenza Plus Electronic Thermostatic Head is firstly installed to the radiator valve, follow
below step to perform the valve adaptation.
To carry out the procedure, proceed as indicated in the following images.
° C
° F
° C
° F
x1
Start calibration
° C
° F ° C ° F
Set point set
° C
° F
Temperature set
During the calibration
operation you will hear
the sound of the actuator
motor moving the valve.
° C
° F
If an error occurs during the adaptation process, the LCD display will show the error code A03.
To carry out the procedure again, it is necessary to perform a Power Reset by removing and
reinstalling the batteries.


EN
Unisenza Plus - Electronic Thermostatic Head
Installation and user manual
Pairing with other Unisenza Plus device (optional)
After the Unisenza Plus Electronic Thermostatic Head joined a ZigBee network, it can be paired with
a Unisenza Plus Receiver or Unisenza Plus Thermostat.
MENU BOOST
- MAIN -
ONAUTO OFF
- AUX -
When pair with a receiver, the Unisenza Plus Electronic Thermostatic Head heat demand will be
passed to the receiver to interlock the boiler or the zone valve.
When pair with a room thermostat, the thermostat will become a remote control to the Unisenza Plus
Electronic Thermostatic Head. The room temperature measured by the thermostat will be used by the
Unisenza Plus Electronic Thermostatic Head.
The Unisenza Plus Electronic Thermostatic Head displays , and the set point and mode control
will follow the settings on the room thermostat.
A maximum of 6 Unisenza Plus Electronic Thermostatic Head can be paired with a room thermostat.
When the Unisenza Plus Electronic Thermostatic Head is paired with a room thermostat, the boiler
interlock with the Unisenza Plus Receiver for the heat demand can be done via the thermostat.
A maximum of total 16 Unisenza Plus Electronic Thermostatic Head or Unisenza Plus Thermostat can
be paired with Unisenza Plus Receiver.
Pair and unpair device using App
Cloud
WiFi
ZigBee
123


EN
Unisenza Plus - Electronic Thermostatic Head
Installation and user manual
456
Pair device using the Unisenza Plus Electronic Thermostatic Head local interface
1
° C
° F
>3 SEC
2
° C
° F
MENU BOOST
-MAIN -
ONAUTO OFF
-AUX -
3
° C
° F
4
° C
° F
PAIRING
MINUTES
5
Unisenza Plus
Receiver
Instruction Manual
OR
Unisenza Plus
Thermostat
Instruction Manual
6
° C
° F
MENU BOOST
-MAIN -
ONAUTO OFF
-AUX -