manuals.online logo
Brands
  1. Home
  2. •
  3. Brands
  4. •
  5. NAD
  6. •
  7. Control Unit
  8. •
  9. NAD PP 375 User manual

NAD PP 375 User manual

PP375 Moving Coil Moving Magnet
Input Sensitivity 1.6mV 18mV
Input Overload >4mV (20Hz – 20kHz) >40mV (20Hz – 20kHz)
RIAA Accuracy +/- 0.25dB +/- 0.25dB
Total Harmonic Distortion <0.03% (20Hz – 20kHz) <0.03% (20Hz – 20kHz)
IHF A Signal to Noise >76dB (100 Ohms load) >77dB (IHF cartridge load)
Channel Separation 1kHz >80dB >80dB
10 kHz >70dB >70dB
Specications
The PP 375 is a simple dealer-installed module that integrates a very high performance phono input with our top
Classic Series Integrated Amps, the C 375BEE and C 356BEE. This high performance phono stage supports both low
and high output moving coil cartridges, as well as the broad selection of moving magnet and moving iron cartridges on
the market today.
> Fantastic Vinyl Playback
An extremely accurate RIAA lter (required for LP
playback) with excellent sensitivity, high overload
margins and extremely low levels of noise and distortion,
extract every nuance of sound from your LPs.
> MDC Modular Design Construction
This MDC upgrade module represents our belief that
customers should be able to easily add new features
in the future without replacing the entire component.
MDC not only reduces cost, but also the impact on the
environment.
>Award-winning Design
The PP 375 circuit, designed by Director of Advanced
Development, Bjorn Erik Edvardsen, is based on many
award-winning preamp designs. MDC also received the
prestigious RedDot Design Award in 2009.
> Seamless Integration
Unlike other external phono preamps, the PP 375 does
not need extra wires, power supplies or interconnect
cables. Automatically assigned to the DISC input
selection on the MDC amp, the level is well matched to
other line level inputs.
PP 375 Phono Preamplier MDC Module
Features
NAD Electronics International reserves the right to change specications or features without notice. NAD is a registered trademark of NAD Electronics
International. All rights reserved. No part of this publication may be reproduced, stored, or transmitted in any form whatsoever without the written
permission of NAD Electronics International. © 01/11 11-001 NAD Electronics International.
www.NADelectronics.com

Popular Control Unit manuals by other brands

Siemens TSM-1 installation instructions

Siemens

Siemens TSM-1 installation instructions

DOTECH FX32EV manual

DOTECH

DOTECH FX32EV manual

Energeeks EG-VALVKIT001 Quick installation guide

Energeeks

Energeeks EG-VALVKIT001 Quick installation guide

Telit Wireless Solutions GE864 DUAL V2 Hardware user's guide

Telit Wireless Solutions

Telit Wireless Solutions GE864 DUAL V2 Hardware user's guide

IS5 COMMUNICATIONS RAPTOR Series user guide

IS5 COMMUNICATIONS

IS5 COMMUNICATIONS RAPTOR Series user guide

Festo VAEM-V-S8EPRS2 operating instructions

Festo

Festo VAEM-V-S8EPRS2 operating instructions

KaRo QS Series manual

KaRo

KaRo QS Series manual

WinSystems PCM-DSPIO Operation manual

WinSystems

WinSystems PCM-DSPIO Operation manual

rako RAIPC Installation and operating instructions

rako

rako RAIPC Installation and operating instructions

Hispacold Ecomaster Clima MH-012 user manual

Hispacold

Hispacold Ecomaster Clima MH-012 user manual

Emerson Fisher ED instruction manual

Emerson

Emerson Fisher ED instruction manual

Siemens 3VM9.88-0LB10 operating instructions

Siemens

Siemens 3VM9.88-0LB10 operating instructions

TRU Components ZJ-IRL62 operating instructions

TRU Components

TRU Components ZJ-IRL62 operating instructions

Axis 2191 installation guide

Axis

Axis 2191 installation guide

engelmann FAW Mounting manual

engelmann

engelmann FAW Mounting manual

Bad Cat UNLEASH operating manual

Bad Cat

Bad Cat UNLEASH operating manual

AsahiAV AV Series Installation, operation and maintenance manual

AsahiAV

AsahiAV AV Series Installation, operation and maintenance manual

Emerson KTM RICHARDS FIGURE R384 Installation and operating instructions

Emerson

Emerson KTM RICHARDS FIGURE R384 Installation and operating instructions

manuals.online logo
manuals.online logoBrands
  • About & Mission
  • Contact us
  • Privacy Policy
  • Terms and Conditions

Copyright 2025 Manuals.Online. All Rights Reserved.