Nakayama PRO PC4100 User manual

PC4100 - PC4610 - PC5610
en
el
WWW.NAKAYAMATOOLS.COM
ART NO: 036456 - 036463 - 036470

WWW.NAKAYAMATOOLS.COM
2
A1
A2
A3
F1
F2 F7
F3

WWW.NAKAYAMATOOLS.COM
3
F8 F9 F10
F12
F16 F17 F18
F20 F21 F27
F13
F14

WWW.NAKAYAMATOOLS.COM
4
F28
F31 F32 F33
F34 F35 F39
F29 F30
F40*
*Not included with all models.

EN
WWW.NAKAYAMATOOLS.COM
5
CAUTION: Before using the chain saw, please read this manual carefully to understand the proper use of your unit.
Keep this manual handy.
Safety First
carefully and follow them without fail.
Symbols on the machine (A3)
a. The port to refuel the “MIX GASOLINE”.
Warning Labels on the machine (A2)
Use the chain saw with two hands.
Main parts (A1)
1. Front guard
3. Air cleaner
6. Right handle
8. Engine switch
12. Saw chain
Safety Precauons
Before using the machine

EN
WWW.NAKAYAMATOOLS.COM
6
less.
Working Gear And Clothing
•
•
•
•
• Ear protectors
Warnings considering handling of fuel
Before Starng Engine
released.
When starng the engine
the handles.

EN
WWW.NAKAYAMATOOLS.COM
7
Addional warnings
Kickback safety precauons for chain saw users
to accidents.
Maintenance
Transportaon
Installing guide bar and saw chain

EN
WWW.NAKAYAMATOOLS.COM
8
8. Tighten the tensioner screw.
Fuel And Chain Oil
Mixing raos:
Chain oil lube
Note: Do not use wasted or regenerated oil that can cause damage to the oil pump.
Main operaon
Starng Engine
dangerous.
starter again to start the engine.

EN
WWW.NAKAYAMATOOLS.COM
9
Checking oil supply
refuelling the unit.
Adjusng the carbureor (F14)
4500 5200
1 ± 3/8 1 ± 3/8
L Needle 1 1/4 ± 1/4 1 1/2 ± 1/4
Carbureor an-freeze mechanism
and this in turn may cause the output power of engine to fail to operate smoothly.
may result in the engine failing to start properly or in the engine failing to operate at its normal speed, and for this reason you
How to switch between operang modes (F16)

EN
WWW.NAKAYAMATOOLS.COM
10
may result in the engine failing to start properly or in the engine failing to operate at its normal speed, and for this reason you
Chain Brake (F18)
idling.
Stopping engine
Sawing
logs. This also helps you get accustomed to your unit.
Maintenance
Maintenance aer each use
2. Oiling port

EN
WWW.NAKAYAMATOOLS.COM
11
Periodical service points
4. Others
6. Front and rear dampers
Maintenance of saw chain and guide bar
Saw chain
The cut way does not go straight.
Guide bar

EN
WWW.NAKAYAMATOOLS.COM
12
Troubleshoong
Case 3. Oil does not come out
Replace with proper fuel.
Replace with proper fuel.
Replace.
Clean.
Clean.
Replace with a new plug.
Replace speed needles.
Model: PC4100 PC4610 PC5610
Displacement: 39,6cc 45,6cc 54,5cc
Power: 2hp 2.4hp 3.5hp
Bar Length: 40cm 45cm 50cm
Chain: 3/8 LP,
1,3mm
0,325''
1,3mm
0,325''
1,5mm
illustrated in the pages of the manual that you hold in your hands may also concern other models of the manufacturer's
Technical Data

EL
WWW.NAKAYAMATOOLS.COM
13
ΣΗΜΑΝΤΙΚΟ!
ΠΡΟΣΟΧΗ!
Σύμβολα που εντοπίζονται στο μηχάνημα (A3)
Εικονογράμματα κινδύνου στο μηχάνημα (A2)
Περιγραφή τμημάτων (A1)
Οδηγίες ασφαλούς χρήσης
Προτού θέσετε σε λειτουργία το μηχάνημα

EL
WWW.NAKAYAMATOOLS.COM
14
Προειδοποιήσεις σχετικά με τον χειρισμό των καυσίμων
ΣΗΜΕΙΩΣΗ
Πριν την εκκίνηση
Κατά την εκκίνηση
Σημαντικές συμβουλές ασφαλείας

EL
WWW.NAKAYAMATOOLS.COM
15
Συντήρηση
Προσοχή!
Μεταφορά
Σύνδεση της λάμας και της αλυσίδας κοπής
Ασφάλεια κατά της ανάκρουσης
Σημείωση

EL
WWW.NAKAYAMATOOLS.COM
16
Καύσιμα και λάδι αλυσίδας
Αναλογίες ανάμειξης:
Λιπαντικό αλυσίδας
Περιγραφή βασικής λειτουργίας
Εκκίνηση κινητήρα
Σημείωση
Σημείωση

EL
WWW.NAKAYAMATOOLS.COM
17
Έλεγχος του συστήματος λίπανσης της αλυσίδας
Ρύθμιση του καρμπιρατέρ (F14)
Όταν ρυθμίζετε ακολουθήστε τα παρακάτω βήματα:
Σημείωση:
4500 5200
1 ± 3/8 1 ± 3/8
1 1/4 ± 1/4 1 1/2 ± 1/4
Αντιψυκτικός μηχανισμός καρμπιρατέρ
Αλλαγή μεταξύ των θέσεων λειτουργίας (F16)

EL
WWW.NAKAYAMATOOLS.COM
18
Φρένο αλυσίδας (F18)
Διακόπτοντας την λειτουργία του κινητήρα
Συμβουλές ασφαλείας κατά της ανάκρουσης (F21)
Συντήρηση
Συντήρηση μετά από κάθε χρήση

EL
WWW.NAKAYAMATOOLS.COM
19
Περιοδική συντήρηση
Συντήρηση αλυσίδας και λάμας κοπής
Λάμα κοπής

EL
WWW.NAKAYAMATOOLS.COM
20
Αντιμετώπιση πιθανών προβλημάτων
PC4100 PC4610 PC5610
39,6cc 45,6cc 54,5cc
2hp 2.4hp 3.5hp
40cm 45cm 50cm
3/8 LP,
1,3mm
0,325''
1,3mm
0,325''
1,5mm
Τεχνικά Χαρακτηριστικά
This manual suits for next models
8
Table of contents
Languages:
Other Nakayama Chainsaw manuals

Nakayama
Nakayama PRO PC3700 User manual

Nakayama
Nakayama PRO PC3600 User manual

Nakayama
Nakayama EC2040 User manual

Nakayama
Nakayama PC3000 User manual

Nakayama
Nakayama EC2345 User manual

Nakayama
Nakayama EC2050 User manual

Nakayama
Nakayama EC1600 User manual

Nakayama
Nakayama PC3100 User manual

Nakayama
Nakayama Pro EC1550 User manual

Nakayama
Nakayama PC4600 User manual