
Step 1 : tap " Accessory setup" on " Settings" page, then tap " Add accessory", then tap " Friends of Hue switch" .
Method 2: is method is applicable for all situations regardless of how many push buttons connected.
Step 2: Tap a brand to select it, any brand will work.
Step 3: Please select any one of the connected push buttons and use the same push button for the entire sequence.
Step 4: When the operation instruction “To connect, hold the lower-right button for 10 seconds, then release” pops up on
the App, press and hold the selected push button for over 10 seconds, then release.
Step 5 : Observe the App to check whether the next step operation instruction pops up. If yes, please go to step 6.
If not, short press the selected push button once and observe theApp again. If next step operation instruction pops up,
go to step 6.
If not, short press the selected push button again and observe theApp again, this operation shall be repeated until the
next step operation instruction pops up on theApp, max. repeating the operation 3 times will enable the next step
operation instruction to pop up on theApp.
Step 6: When next step operation instruction “That worked! Now press the top-right and lower-left buttons at the same
time.” pops up on theApp, press and hold the selected push button for over 10 seconds, then release.