2
Maintenance Methods / Tips
GA-REW PT-2 Tornador
Cleaning after use. Use water or other specialized chemical solution to clean
the spray tube, cone, and bottle. Preserve it at ventilated and dry place without
direct sun irradiation.
● Weighted tube, cone, and other accessories are consumables. The use life of the those consumables
may vary from the frequency of use, and user's habits.
● NEVER point the cleaning guns in the direct of human body, face, and eyes. Wear safety goggle and
respirator during the operation.
● TISI shall not be responsible for device damage caused by application of unoriginal accessories and
special consumables, or your own repair, parts replacement, and disassembly of the device. In such
case, even the device is still under limited warranty, such repair shall not be provided for free.
● In case of any abnormity or damage of the equipment during the use process, please terminate the
operation immediately.
3
First, put clean water or
specialized solutions into tank.
Put the tube into tank, and
release pressure by triggering
the gun for 1~2 minutes
Next, put the cone part into
the tank, and release pres-
sure by triggering the gun for
1 minute. (Note: Special
acting requires for individual
tools, please refer to the
instruction for us for each
tools)
Third,triggering the gun in the air
for 1 to 2 minutes. Preserve it at
ventilated and dry place without
direct sun irradiation.
If the device is not cleaned after use, the solution will resort in the
device, and dust and bacteria will remain, which will seriously
corrode the device and greatly reduce the use life of the device.
Notice
Model:
Size
Weight
Air Pressure
Bottle Capacity
Liquid
Temperature ( oC)
Connection
PT-2
W100 D350 H240
1 kg.
0.5-0.8MPa
1000ml
Neutral
10-50
Coupler-male
NANOSKIN CAR CARE PRODUCTS
Division of Total Import Solutions, Inc.
La Habra, CA 90631
Engineered in Japan
Designed in USA
Made in PRC
www.nanoskinusa.com
For Chemical Emergency: PERS – Day or Night
NORTH AMERICA :1-800-633-8253
INTERNATIONAL :1-801-629-0667
