NanoXX 9600IP User manual

User’s Guide
9600 IP
Set – Top – Box

For your safety
II
Information contained in this manual is subject to change without notice.
No part of this publication may be copied, reproduced, or translated to another language for any
purpose.
yBe sure to read the user manual before starting the operation of the receiver.
yDo not open the housing. The receiver contains high-voltage components and parts.
yEven after switching off the receiver still contains high-voltage for a while.
yDo not expose to rain or moisture.
yDo not make objects or fluid enter the housing through the ventilation slot. If any spilt liquid
went into to the housing, unplug the power cord and call your local Service provider.
yDo not place close to any heat source.
yDo not press with hard or heavy object.
yTo protect possible malfunction by lighting, we recommend you to use power surge unit. Call
your local dealer for advice.

Contens
III
1. Before Getting Started··································································································1
1.1 Main Features ······································································································· 1
1.2 Accessories ···········································································································2
2. Controls and Functions ······························································································3
2.1 Front Panel ··········································································································· 3
2.2 Rear Panel ··········································································································· 4
2.3 Remote Control Unit ······························································································· 5
3. Connections ··············································································································7
3.1 Connecting to the TV, VCR and Satellite Antenna ·························································7
3.2 Connecting DiSEqC switch ·······················································································7
3.3 Connecting to the TV, HiFi system ···············································································8
3.4 Connecting Smart Card module (Optional) ····································································8
4. Settings and Operations ·····························································································9
4.1 Installation ············································································································9
4.2 Viewing TV(or Radio) ······························································································19
4.3 Other Functions ···································································································25
4.4 System Settings ···································································································28
4.5 Recent Settings ·····································································································32
4.6 Automatic S/W update via Internet ················································································35
4.7 CA Information·······································································································37
5. Appendix ················································································································38
5.1 Troubleshooting ···································································································38
5.2 Specification ········································································································38
5.3 Glossary ·········································································································39

Before Getting Started
1
1.1 Main Features
. Easy Menu Function
. TV Guide Function
. RF Output Function
. Electronic Program Guide(EPG) for On Screen Channel Information
. Software Upgrading Function through RS-232C Cable by PC
. Perfect DiSEqC 1.0 for Various Antenna Systems
. Supports of Ku/C band, SCPC and MCPC
. Additional Audio Output Function for Connection to Hi-Fi Audio System
. Other Functions of Remote Controller, Receiving Level Selection, Channel Editing,
Menu Language Selection and Audio Selection
. Digital free-to-air Satellite Receiver
. NTSC & PAL Output Function
Regardless of the TV type, NTSC and PAL channels can be viewed by selection
When PAL channel is viewed on NTSC TV, small deletion on up & down sides of the screen may
occur and it is normal, as its conversion is managed by software. And darker color on the bottom
side of the screen may occur, when NTSC channel is viewed on PAL TV.
. 1200 Transponders and 3200 Channel Memory Function
. Teletext Supported
. Multi Language Function(Menu, Audio)

Accessories
2
1.2 Accessories
User’s Guide
Batteries (AAA)
Remote Control Unit

Controls and Functions
3
2.1 Front Panel
Turn the power on/off.
MENU
Shows the menu application.
OK
Select menu or value on menu item.
VOL◀▶
Control volume, change item on menu or input frequency value.
CH▼▲
Change channel, move menu, or input frequency value.

Rear Panel
4
2.2 Rear Panel
IP Connection
Network interface
LNB IN
It receives signals from the LNB in the range of 950 ~ 2150MHz. Connect a satellite dish to DIGITAL
SATELLITE RECEIVER.
LOOP
It sends signal to another receiver.
AUDIO (R,L)
It provides stereo audio output. Connect the audio on TV to AUDIO with RCA cable.
VIDEO
It provides composite video output. Connect the Video on TV to VIDEO with RCA cable.
SPDIF
Output for connection to a digital amplifier.
RF IN
The signal supplied to this connector from a TV antenna will be sent to TV antenna output. Connect a
TV antenna to TV ANT IN.
RF OUT
It provides a modulated audio and video from the receiver. Connect the TV/VCR on TV to TV/VCR
with the RF cable.
VCR
It provides composite video and audio outputs. Connect the VCR scart on VCR(or Decoder) to VCR
with scart cable.
TV
It provides RGB video and Composite video. Connect the TV scart on TV to TV.
RS-232C DATA
It receives data by connecting to PC for software upgrading. Connect with RS-232C cable a PC and
receiver.
ON / OFF
The switch is to turn on or off the main power of the receiver mechanically.

Controls and Functions
5
2.3 Remote Control Unit
Open the controller cover on the back and insert two batteries (AAA - 1.5V).
MUTE
Deactivate current sound.
POWER
Turn the power on/off.
Numeric(0~9)
Change channel or input frequency value.
CLEAR
Clear wrong number input or delete channel from TV (Radio)
list or favorite channel list.
TV/SAT
Select between TV Channels and Satellite
channels for RF output.
MENU
Shows the menu application.
EXIT
Exit from the menu.
GUIDE
Shows EPG [ELECTRONIC PROGRAM GUIDE]
FAV
Add TV or Radio channel to the favorite list on Edit
TV(Radio) Channels, or watch favorite channel from your
favorite list.
Channel ▲ ▼
Change channel, move menu, or input frequency value.
Volume ◀ ▶
Control volume, change item on menu or input frequency
value.
OK / LIST
Shows channel list, Select menu or value on menu item.
RECALL
It is to move to previous channel.

Remote Control Unit
6
Page UP/DOWN
Move to previous/next page on TV(Radio),
Favorite Channels or Edit TV(Radio) Channels.
INFO
Shows the information of current channel.
Click the INFO button twice, EPG mode will be displayed. When pressed in channel list channels will
be sorted in alphabetical order A-Z
AUDIO
Select Stereo, Main or Sub from multi language channels available.
LANG
Select the audio language from 2 or more audio language channels available.
TEXT
Change to Teletext mode.
TV
Change to TV mode from radio channel.
RADIO
It is for fast change to radio mode from TV channel. Shows the current Radio program list.
SIZE
Select between standard 4:3 and wide 16:9 screen sizes.
RECENT
If you hope to show channel list which you watched TV channel list recently, you have to use this
function and may show channel list easily.

Connections
7
3.1 Connecting to the TV, VCR and Satellite Antenna
It is not necessary to adjust power, as the product is of free - voltage (AC 110~220V )
1. Connect another scart cable from the TV on the satellite receiver to scart socket on the TV.
2. Connect the RF cable from the TV OUT on the satellite receiver to a TV. Connect an antenna to the
LNB socket on the VCR or other receiver and the RF modulate on the VCR and the TV ANT.IN.
3. Connect a cable of the satellite dish to the DIGITAL on the satellite receiver
3
3.2 Connecting DiSEqC switch
If you have one antenna equipped with many LNBs or two antennas with one LNB on each, you need
a DiSEqC switch.
1. Connect the LNBs to a DiSEqC switch at first.
2. Connect the antenna cable to the OUT connector on the DiSEqC switch and connect the end of the
cable to the DIGITAL on the satellite receiver.

Connecting to the TV, HiFi system
8
3.3 Connecting to the TV, HiFi system
1. Connect the RCA cable from the VIDEO INPUT on the TV to the VIDEO on the satellite receiver.
2. Connect a RCA stereo cable from the AUDIO RL on the satellite receiver to the AUDIO RL on the
HiFi system.
3.4 Connecting Smart Card module (Optional)
To get service of Xcrypt encrypted programs, subscribe a Xcrypt Smart card from program
provider. Insert Xcrypt smart card into slot for watching encrypted TV programs.
NOTE
Insert smart card into a smart card slot with facing IC upwards

Settings And Operations
9
4.1 Installations
If it is the first time using a receiver, you should set parameters for system configuration.
Refer to the following section.
1. Turn on your TV and Satellite receiver.
2. Press the MENU button, main menu screen will appear as shown below.
1. Select Installation on the Main Menu.
To enter “Installation” password is required. The default password is “0000”.

Installations
10
2. Select “Antenna Setting”
3. Select “LNB Power” . If LNB Power is independently supplied from outside source, set the LNB
Power OFF. Otherwise set it ON.
If DiSEqC 1.2 selects ON, you can set DiSEqC for slectected Satellite.

Settings And Operations
11
4. Select correct name of Satellite. If there is no proper satellite name listed, select one from any of
USER1 ~ USER 20.
5. If you want to change the LNB type go to LNB TYPE and use ◄/►buttons to select the LNB
Frequency

Installations
12
6. If only one antenna is in use, set DiSEqC mode to disable.
If more than 1 antenna According to the option and position of DiSEqC switch, select mini A, Mini B,
DiSEqC 1 ~ DiSEqC 4.
If the option AUTO is selected the receiver will select the correct position automatically.
7. If you have a DiSEqC 1.2 motorized system to control your satellite antenna you have to select ON
on DiSEqC 1.2
If DiSEaC1.2 sets ON, DiSEqC1.2 Settings menu will be active and you can set it up.

Settings And Operations
13
8. If you are not using external LNB switch set 0/12V to disable
If you are using external LNB switch you can control it by selecting either 0V or 12V
9. Select Search Channels on the Antenna Setting; press OK, all the available Channels will be
searched automatically.
<Manual search>
1. Select manual search of the installation
2. Select correct name of Satellite. If there is no proper satellite name listed in the item, select one
from any of USER1 ~ USER 20.

Installations
14
3. Move to desired TP with CH ▲▼ on the RCU. If there are no transponder data which you want,
move to Add New TP and press OK button.
4. Select the desired satellite. And input correct values of Frequency, Polarization and Symbol Rate.
Select the Polarization value as Hor of Ver. If you did not know accurate polarization value, select
“Auto” in the “Polarization”.
Once all the parameters are entered, Press “OK” on “Search channels” button to scan programs on
the TP.
If no any channels get scanned manually select the option advanced search Input proper Channel
name and input the values of Video PID, Audio PID and PCR PID. Then, press OK button from the
Add item.

Settings And Operations
15
Encrypted or Scrambled channel is marked as “$” sign at the beginning of the channel name. After
successful completion of channel searching, move to TV channels or radio channels on MAIN MENU
to select currently received channels.
NOTE
Depending on certain TP or satellite, the Network Search function may not work.
Multi Sat. Search
To use the Multi Sat. Search function,
Move: MAIN menu -> Installation -> Channel Search -> Multi Sat. Search
Press OK button on “Select Sat.” mode. Press OK to choose the desired satellite
Press the RED button present in the RCU to scan the selected satellites.

Installations
16
[ Network Search ]
Network search function is enable to search new TPs and all channels in all TPs.
* How to go” Network Search” menu :
Main menu -> Installation --> Channel Search --> Select Search Channels -> Choose “Network
Search” mode in the “Search Channels”.
<DiSEqC 1.2 Limit Settings>
If you have a DiSEqC 1.2 motorized system to control your satellite antenna you have to make the
following setting.
First, you must select ON on DiSEqC 1.2 of LNB Setting in the Setting.
< ☞Please refer to the Setting section >
1. Move Antenna Settings menu.
Select DiSEqC 1.2 Limit Settings of the Antenna Setting