NASA electric NS-317 User manual
NS-317
NS-317
Meat grinder
NS-317
Meat grinder
4
.
.
.
.
.
.
.
.
.
.
.
.
REV .
.
.
.
.
.
.
5
M G A
N H B
O I C
P J D
Q K E
R LREV F
•
•
•
•
P •
•
A
F
D
C
B
H
G
E
JI
K
M
L
N
O
RQ
P
NS-317
Meat grinder
6
▪
▪
-
--
-
-
-
-
-
-
-
-
-
××
7
-
--
-
-
-
•
REV
•
Q , R •
.
.
.
.
-
-
-
-
-
-
.
.
.
.
NS-317
Meat grinder
8
-
.
.
•
•
7
Power 400 W
Frequency 50 Hz
Voltage 220-240 V
At the end of appliance`s
service life, this product may
not be disposed of in the
normal household waste, but
rather must be disposed of
at a collection point for re-
How to clean & maintenance
You can remove meat left behind in
the cutter housing by passing a slice of
bread through the cutter housing.
1. Before you clean the appliance,
switch the appliance off and remove
the plug from the socket.
2. Press the release button and turn
the whole cutter housing in the direc-
tion of the arrow. Remove the pusher
and the tray.
3. Unscrew the screw ring and remove
all parts of the cutter housing. Do not
clean the parts in the dishwasher.
4. Wash all parts that have contact with
meat in hot soapy water. Clean them
immediately after use.
5. Rinse them with clear hot water and
dry them immediately.
6. It is recommended that to lubricate
the cutting lots and grids with a little oil.
7. If you do not want to use the device
for a long time, first remove all detach-
able parts, then clean and keep the
device out of children.
Product storage
work and place it in a dry place away from
wet.
thats the parts & the body of the device are
dry.
Technical specifications
cycling electrical and electronic devices.
The materials are recyclable according
to their labelling. You make an important
contribution to protecting our environment
by reusing, recycling or utilizing old devic-
es in other ways. Please ask the municipal
administration where the appropriate dis-
posal facility is located.
Guarantee and after sales service
This device has 18 month guarantee
and 5 years after sales service, for
more information about guarantee and
after sales service condition please
read the guarantee sheet in the end of
this user manual or call +982145114.
NS-317
Meat grinder
6
2-1
2-6
2-52-4
2-3
2-2
3-1
3-43-3
3-2
Making sausages:
Put the ingredients in the tray. Use the
pusher to gently push the meat into the
cutter housing.
Put the sausage skin in lukewarm wa-
ter for 10 minutes. Then slide the wet
skin onto the sausage horn. Push the
-
ter housing. If the skin gets stuck onto
the sausage horn, wet it with some wa-
ter.
Making KUBBE
A. Connect the cutter housing to the
device, then turn it counterclockwise
until the lock sound is heard. Insert the
Worm shaft into the Cutter housing.
B. Place the KUBBE maker series on
C. Rotate the Throat guarantor on the
D. Place the tray on the cutter housing.
E. Now the appliance is ready for mak-
Image of 2
ausage mak-
er and KUBBE maker series must be
used together and using them sepa-
rately will be dangerous.
Storage box
1. Push the cover of the storage box.
2. Put the grinding discs into the inner
3.
4. Push the cover again to close the stor-
Tips
1. Rotate the power cord then place it
in chamber which is under the device.
2. If the cutter housing is blocked,
3. In this case, the meat moves inside
the Cutter housing and the device can
work normally again.
4. Parts Q, R can be placed inside the
pusher.
5
1-1
1-6
1-5
1-41-3
1-2
setting over current protector system is
activate too often.
How to use attachment
1. Connect the throat to the device, then
turn it counterclockwise until the lock
2. Insert the worm shaft into the throat.
3. Place the blade on the worm shaft
4. Select and paste the required grid.
5. Turn the throat nut clockwise and
6-
The device is ready to use.
Materials Meat
Maximum weight 2000g
Time 3 minutes
Speed 1-8
Average size of meat piece 20×20×60mm
Table of usage device function
1
6
5
4
3
2
Mincing:
Cut the meat into 6 cm-long, 2cm-thick
strips. Remove bones, pieces of gristle and
Put the meat in the tray. Use the pusher to
gently push the meat into the cutter housing.
Making sausages
Mince the meat.
1. Connect the Cutter housing to the de-
vice, then turn it counterclockwise until the
lock sound is heard. Insert the Worm shaft
2. Insert the separator into the Cutter
3. Place the sausage maker on the Cutter
4. Rotate the Throat nut on the Cutter
5. Place the tray on the vertical part of the
6. Now, the device is ready to prepare
Image of 1
NS-317
Meat grinder
4
Tips for the device:
This appliance is equipped with an
overload fuse that will automatical-
ly outage the power supply in case of
over current.
If your appliance suddenly stops running
1. Pull the mains plug out of the socket.
2. Let the appliance cool down for 60 minutes.
APusher G MCoarse grid
BTray HTwo speeds button NCutter blade
CCutter housing Ibody OWorm shaft
DThroat guarantor JAnti-shake base POverloud fuse
EThroat nut KFine grid QSausage maker series
F LMedium grid RKUBBE maker series
Device parts & accessories
3. Put the mains plug in the socket.
4. Press the switch button to turn off
the appliance.
5. Press the circuit breaker button at
the bottom of the device to turn on the
appliance.
6. Switch the appliance on again.
Please contact NASA Electric after
sales service center if the non-self-re-
A
F
D
C
B
H
G
E
JI
K
M
L
N
O
RQ
P
3
Important safety warnings
Read these instructions for use carefully
and keep it well.
1. Plug in and make sure the voltage of
home socket is match with this product.
2. This appliance is not intended for use
-
duced physical, sensory or mental ca-
pabilities, or lack of experience and
knowledge, unless they have been given
supervision or instruction concerning use
of the appliance by a person responsible
for their safety.
3. Children shall not play with the ap-
pliance.
4. This appliance is intended for home
use and the following:
-
ties are available
5. Before using the appliance for the first
time completely clean parts that contact
foods.
6. If any problems or breakdowns in
any components of the device, includ-
ing power cable and plug, never use the
appliance and immediately contact one
of the nearest certified NASA Electric
after-sales service centers or send the
device to the center.
7. In case of failure of a part of the device,
do not replace it with similar parts and be
sure to contact NASA Electric after sales
service. +982145114 for
8. Do not use the device if the blade is
lean or damaged.
9. Before installing and removing the
parts, turn off the appliance and unplug it.
10. Operate according to the user manu-
al to remove and install the device parts
correctly.
Warning: Do not touch moving parts after
removing the device parts.
11. Be careful when touching sharp
cutting blades, emptying the bowl and
cleaning the device.
12. After working with the device immedi
ately unplug the appliance.
13. While the device is operating, never
use finger or other object to guide food
into the duct. Use only the pusher for this
purpose.
14. Never use the appliance without meat
15. Do not use the device to grind and
crush bones, nuts or hard materials.
16. Never touch the cutter housing. Use
only the pusher.
17. Never operation the appliance con-
tinuously for more than 3 minutes at rat-
ed power.
18.
when the appliance does not absolutely
stop.
19. Disconnect the appliance from the
supply if it is left unattended and before
assembling disassembling or cleaning.
20. Before removing the parts wait until
the moving parts to stop.
21. There is a potential injury from the
misuse.
22. Before replacing the moving parts of
the appliance unplug it.
23. After each use allow the appliance to
cool and become outside temperature.
24. Never place the appliance near heat-
ing sources such as radiators, heaters or
fireplaces.
Contents Pages
Important safety warnings..........................................................................3
Deviceparts&accessories..........................................................................4
How to use attachment...............................................................................5
Making sausages........................................................................................5
Making kubbe...............................................................................................6
Storage box.................................................................................................6
How to clean & maintenance.......................................................................7
Technical specifications............................................................................7
Guarantee and after sales service............................................................7
NS-317
Meat grinder
Thank you for choosing our product.
This instructions manual has been prepared for you to achieve
complete satisfaction and maximum performance from your
product read these instructions carefully before using the appli-
ance and keep the manual for future reference.
NASA electric Meat grinder NS-317 User manual
Table of contents
Languages:
Other NASA electric Meat Grinder manuals
