NateoSante AIR INITIAL STYLE User manual

Air Purifier
User Guide
AIR INITIAL STYLE
Before operating the equipment
Make sure that the filter is removed from the packaging. Remove the motor belt, and
then read the following manuals carefully.
=

2 Air Initial STYLE
Thank you for your choice and wish you a good installation of your Air Initial Style.
Expert Tips
The indoor air is approximately 8 to 10 times more polluted than outdoor air. Therefore,
it is important to refresh indoor air, in summer or winter, for at least 10 minutes every day.
While doing so, it is not necessary to turn off your air purifier. In summer, when the window is
opened for a longer period, please disconnect the power source of the purifier. The air is
constantly changing in the room and the purification will not be effective. Once the windows
are closed, you can turn the air purifier back on.
Our air purifier is efficient, energy saving; and silent. It contains a medical grade filter,
an active carbon filter, an anion generator and active oxygen function.
SAFETY INSTRUCTIONS
•Keep the device out of reach of
children.
•Children should always have adult
supervision when they get close to this
device. Please make sure children do not
play with the device.
•This device is not suitable for the
following persons (including children) with:
physical, sensory, and mental abnormalities
and people with lack of product knowledge/
experience. If necessary, they should use
the device under guidance of an
appropriate person.
•Do not use the device when the
temperature is above 40 degrees.
•Do not place the device under
direct sunlight or near the heat.
•Voltage of the device ranges
between 220 to 240 v. In order to prevent
fire and electric shock, do not insert it into
sockets with a higher voltage.
•Do not twist or pull the power cord
excessively; do not place heavy objects on
the device.
•To avoid the risk of electric shock,
do not connect the power cord to damp
places.
•Do not place any metal objects
inside the device.
•Do not pour any liquids on the
surface or inside the device.
•Do not disassemble the equipment
arbitrarily. When cleaning, use a soft cloth
to wipe the device.
•Disconnect the power supply and
unplug the power cord before cleaning the
device and replacing the filters/accessories.
•Do not open the device and
replace the filter arbitrarily.
•Do not place the device in front of
inflammable and explosive materials.
•Do not use the device when the air
contains alcohol, pesticides, etc. Ensure
adequate ventilation before usage.
•To maximize the efficiency, do not
place the machine near metal objects.
•Place the device on a flat surface.
Otherwise, the device may break down.
•Place the device on dry ground,
and avoid contact with combustible
materials, nylon surface, radiators and
other heat sources.
•When the machine is in
malfunction, do not use the device.
•If you hear unusual noises or
observe any suspicious signs, unplug the
power cord immediately and contact
NatéoSanté.
•Unplug the power cord when not in
use.
•Do not use this machine in hot and
humid environments (such as bathrooms
and kitchens).
•Keep a distance of at least 30 cm
between the device and objects like
cabinets and walls.
•Keep the device at least 1 meter
away from TV or the computer.
•This device is only suitable for use
in a well-ventilated room. Do not use
outdoors.

3 Air Initial STYLE
1. INTALLATION INSTRUCTIONS
This air purifier can both be used in your home
and at your office. It can be used in an area of 20
m² (within 2.5m high), namely 62 m3.
In order to facilitate the air circulation and to
optimize the filtration, please place the device at
at the opposite site of the air inlet (such as
controlled ventilation equipment, doors and
windows).
•Get the device out from the bag.
Please keep the original carton and foam
during the entire lifespan of the device.
•Open the right cover and reach the filter box.
•Remove the filters from their packaging, and
put them back in the device. The black rings
outward. Please put the filters in the following
order (page 6).
•Connect the device to a socket.
If the power is pulled out and reconnected, the
device will return to the initial state.
2. OPERATING MANUAL
Following the installation, the air purifier
is ready to use.
Before pressing the power button,
please read the following instructions carefully
to ensure the normal operating of the device.
How does this device work?
When this air purifier works, contaminated air
is drawn into filtration system from the right
side. The device starts filtering. Fresh air is
released from the top, purifying the entire
room.
Depending on your needs and the current
environment, you can select the appropriate
fan speed via the control panel or remote
control.
A. FILTER FUNCTION

4 Air Initial STYLE
This air cleaner device only supports the following types of filters :
For an optimum filtering effect, make sure to replace the filters regularly (see on the page 6).
1 –Medical Grade antibacterial HEPA Filter (High Efficiency Particulate Air Filter):
•It absorbs dust particles and bacteria from 0,0003 mm (0,3µm).
•It captures fine dust, dust mites, pollen, animal hair, diesel particulates, molds, spores, fungi,
pesticides, bacteria, viruses and microorganisms…
2- Active carbon filter :
•It captures toxic gases, pesticides, cooking smoke, tobacco, etc.
•It eliminates odors.
•It absorbs VOC (volatile organic compounds), formaldehyde, benzene, hydrogen sulfide,
ammonia vapor, bleach…
•Accelerates the decomposition of ozone in the astmosphere
B. ADVANCED FUNCTIONS
In addition to the filtration system, it is possible to select additional functions to optimize your air
quality.
These functions are activable upon request, according to your needs.
3 –Anion Generator
•Anions are negative ions that exist in the forest or by the sea.
•It fills the air with anions to suspend large particles in the air.
•It can make the dust and pollen suspending in the air fall on the ground.
•It can dissipate smog and peculiar smell.
•It can produce 8 million anions per second.
4 –Active Oxygen
Active Oxygen function can be used as a deep cleaning process, once a week for example, after you
leave the room.
Ozone is a very powerful natural cleanser, but it can be dangerous to the respiratory tracts. This
function should be used with caution

5 Air Initial STYLE
Please read the following instructions carefully if you need to use
the ACTIVE OXYGEN/OZONE function
1. Please do not inhale ozone directly above
the device.
2. When in use, please make sure that there
are no creatures in the room (including men,
women, children, cats, dogs, rabbits, birds,
etc…) Plants and fishes can be kept in the
room.
3. Please keep windows and doors closed, as
well as the ventilation system
4. Please make sure the door is closed when
leaving the room.
5. Please enter the room at least 3 hours after
the ozone function is over.
•Active oxygen consists of three oxygen
molecules (O3) also called ozone.
•It is produced by lightning in the
thunderstorm weather.
•It can eliminate volatile organic compounds
(VOC) and peculiar smell, and kill dust
mites, spores, etc.
•As for disinfection, ozone is more effective
than chlorine. The ozone created by
electricity could revert to original oxygen
(O2) in less than an hour
•Test shows when this function is not enabled,
the ozone concentration in the air is 0 ppm
•Ozone needs to remain in small quantities in
the air in order to pleasant and beneficial.
The quantity of ozone generated is 0,50 ppm
per hour according to the standards
•This function stops automatically after 20
minutes of operation, then the purifiers
continues to work without the O3 function,
with previous settings
“Active Oxygen” mode is activable only with the remote control.
CHILD SAFETY FUNCTION
This function will prevent small hands to change the settings that you choose or to trigger functions
that require that you leave the room.
In order to launch this child safety function, press the POWER button for 3 seconds (until you hear the
bip sound), it will lock the screen.
To remove this function, just press the POWER button for another 3 seconds (until you hear the bip
sound).

6 Air Initial STYLE
3. CONTROLLER DISPLAY OVERVIEW
Temperature indicator Humidity level indicator Timer
Remote control
Put the CR2032 battery supplied with the remote control.
The + sign should be visible.
4. COMMISSIONING
Press the "POWER" button.
The air purifier starts to work. The control panel is on.
FUNCTION
Press the "FUNCTION" button to activate the Anion Generator.
Active Oxygen function is only activable via remote control.
TIMING
Your air purifier has been designed to work 24/7.
Press the "TIMINIG" icon for 3 seconds. The "0" digit starts to flash. Press the icon repeatedly
to choose the wanted operation duration, wait for 5 seconds to validate your choice. To
cancel your choice, press the "TIMING" icon for 3 seconds. Press the "TIMING" icon to
visualize the duration you have chosen

7 Air Initial STYLE
SPEED Press the "SPEED" button repeatedly to change the filtration speed.
The wind speed of your air purifier is designed precisely. If there are no special circumstances
(such as allergies, respiratory problems, sudden increase of pollution, etc.), you can simply use
the wind speed 1 for a whole day’s purification.
SLEEP MODE
Please press "SPEED" for 3 seconds to activate the Sleep mode. To deactivate this mode, press "SPEED" for
3 seconds. The device will be silent and operate with minimum wind speed.
5. FILTERS REPLACEMENT
Please check your filters visually every 2 months. The lifespan of the filters (from 6 to 12 months) depends
on the pollution level of the room and the usage of the device.
Do not vacuum or clean the filters with water: it may cause damage to the filter or the
filter screen, and cause dysfunction of the purifier.
When should the filters be replaced?
When one of the filter icon flickers, you need to replace the filters.
It is sometimes necessary to replace the filters during after work cleanup, because of prolonged use in
highly polluted environment (dense smoke, strong odors...).
Open the right cover: grab the air purifier with one hand, and hold slightly the bottom of
the right cover, take off the right cover (picture 1)
Remove the old filters: grasp the ring-pulls on both sides of the filter
Pull the HEPA filter out gently (picture 2)
Pull the Active carbon filter gently (picture 2)
Pack up the old filters and discard them with household wastes
Get out the new filters out of the packaging
Replace the filters: please replace the filter in the following order, with ring-pulls outwards:
put the active carbon filter first with black side and ring-pulls visible then place the HEPA
filter with grey foam and ring-pulls visible
Close the cover: make sure that the cover is properly closed, otherwise the device will not
operate normally.

8 Air Initial STYLE
After having replaced les filters, please press on “RESET”. The filter icon will stop flashing.
It indicates to the device that the filters have been properly replaced.
Activated carbon filter wear indicator (flashes when the filter needs to be replaced).
HEPA filter wear indicator (flashes when the filter needs to be replaced).
6. MAINTENANCE
Please use a piece of clean and slightly moist soft cloth to sweep the dust on the air purifier.
Please comply with all the rules on Safety Instruction (See page 2).
7. INDICATIONS IN CASE OF MALFUNCTION
Problems
Solutions
The device does not work.
Check the power plug.
Ensure the right cover is correctly placed.
The device does not shut down.
Pull out the plug and pull it in after 15 minutes.
Odors are not filtered
Change active carbon filter.
Dust is not removed and there is noise
coming from the device.
Changer the filter HEPA
There is cold wind blowing from the device.
It is normal. Cold air, close to the ground is inhaled,
filtrated and blown creating a feeling of freshness.

9 Air Initial STYLE
8. PRODUCT SPECIFICATIONS
Fan speed
Low/Night
Medium
High
Air flow m3/h
100
150
230
Level of noise
22
30
36
Power (watt)
16
22
36
Negative ion generator
8 million/cm3
HEPA filter
206 x 99 x 40
purification rate > 99,9%
Active carbon filter
206 x 97 x 15mm
UV lamp
size T5/6W/220V : wavelength 254nm
Power cord length
1,4 m
Size of the device
Height 33 cm x length 30,5cm x width 17cm
Weight
4 kg
Voltage
220-240 V, 50Hz
Use area
25 m²

10 Air Initial STYLE
Warranty
In order to be covered by the warranty, you have to keep the original packaging. The device is guaranteed
for twe years.
Please provide invoice for warranty.
Warranty periods begins from the date you receive your device.
Warranty covers component replacemetn, labor costs, reparing and the postage. The filters have to be
checked and replaced regulary. All the problems due to the filters are not covered by the warranty.
Warranty does not cover damage caused by improper operation.
The filters and the ozone generator are not covered by the warranty.
Warranty does not cover any damage or fault caused by external forces.
Warranty does not permit unauthorized repair, alteration or changes of components.
The warranty is only suitable for replacing the pieces that is considered broken by our After-sales service. In
case of malfunction of your device, please contact:
NatéoSanté
Technical Support
P.A du Pont Béranger II
44680 Saint Hilaire de Chaléons
[phone]
[email protected]
Protection of the environment
According to the Europeen DEEE requirement, electronic equipment should be recycled and
reused. This is also the responsibility that the ultimate holder should fulfill. For recyclable
products, please read relevant local provisions for electronic and electrical waste and their
classifications. Do not discard your product with other household wastes. Place it in a
suitable collection point. Proper disposal of waste helps to avoid negative impacts on the
environment and human health.
The air purifiers of NatéoSanté meets all EU requirements for product safety performance.

[phone]
www.nateosante.com
NatéoSanté
Show-room and After-sales service
P.A. du Pont Béranger II
44680 Saint Hilaire de Chaléons
Head Office
13 rue Bonne Fontaine
44 680 SAINTE-PAZANNE
Capital of 200 000 €- SIRET 535 094 148 000 17
Air Initial Style L user manual –December 2018 edition