National Instruments PXIe-6591R User manual

GETTING STARTED GUIDE
NI PXIe-6591R
High-Speed Serial Module
This document explains how to install your NI PXIe-6591R (NI 6591R) high-speed serial
module.
The NI 6591R provides access to FPGA multi-gigabit transceivers (MGTs) via Component
Level IP (CLIP) for use in the following applications:
• Functional test for semiconductor production
• Protocol functional test
• Device interfacing
• High performance embedded systems
For more information about features and programming, refer to the NI High-Speed Serial
Instruments User Manual. For device specifications, refer to the specifications document for
your device. To access these documents, select Start»All Programs»National Instruments»
High Speed Serial Instruments»High Speed Serial Instruments Documentation.
For the most current versions of documentation, visit ni.com/manuals. For the latest version of
the NI LabVIEW Instrument Design Libraries for High Speed Serial Instruments driver, visit
ni.com/downloads.
Caution The protection provided by this product may be impaired if it is used in a
manner not described in this document.
Contents
Electromagnetic Compatibility Guidelines...............................................................................2
How to Use Your Documentation Set....................................................................................... 2
Device Front Panels.................................................................................................................. 3
Verifying the System Requirements..........................................................................................4
NI 6591R Kit Contents............................................................................................................. 5
Preparing the Environment....................................................................................................... 5
Unpacking the Kit..................................................................................................................... 5
Installing the Software.............................................................................................................. 6
Installing the NI 6591R Module............................................................................................... 6
Configuring the NI 6591R in MAX..........................................................................................7
Accessing Sample Projects....................................................................................................... 8
Troubleshooting........................................................................................................................ 8
What Should I Do if the NI 6591R Doesn't Appear in MAX?......................................... 8

Where to Go Next..................................................................................................................... 8
Worldwide Support and Services.............................................................................................. 9
Electromagnetic Compatibility Guidelines
This product was tested and complies with the regulatory requirements and limits for
electromagnetic compatibility (EMC) stated in the product specifications. These requirements
and limits provide reasonable protection against harmful interference when the product is
operated in the intended operational electromagnetic environment.
This product is intended for use in industrial locations. However, harmful interference may
occur in some installations, when the product is connected to a peripheral device or test object,
or if the product is used in residential or commercial areas. To minimize interference with
radio and television reception and prevent unacceptable performance degradation, install and
use this product in strict accordance with the instructions in the product documentation.
Furthermore, any changes or modifications to the product not expressly approved by National
Instruments could void your authority to operate it under your local regulatory rules.
Caution To ensure the specified EMC performance, operate this product only with
shielded cables and accessories.
Caution To ensure the specified EMC performance, the length of all I/O cables
must be no longer than 3 m (10 ft).
Caution To ensure the specified EMC performance, you must install PXI EMC
Filler Panels, National Instruments part number 778700-01, in all open chassis slots.
A kit of six single slot EMC Filler Panels can be ordered directly from NI by visiting
ni.com/info and entering partnumber.
How to Use Your Documentation Set
Refer to the following table to learn how to use your documentation set.
Table 1. NI 6591R Document Locations and Descriptions
Document Location Description
NI PXIe-6591R Getting
Started Guide (this
document)
Available from the Start
menu and at ni.com/
manuals.
Contains installation instructions for
your NI 6591R device and driver
software.
NI High Speed Serial
Instruments User Manual
Available from the Start
menu and at ni.com/
manuals.
Contains information about
developing applications for the
NI 6591R and NI 6592R.
2| ni.com | NI PXIe-6591R Getting Started Guide

Table 1. NI 6591R Document Locations and Descriptions (Continued)
Document Location Description
NI High Speed Serial
Instruments Help
Available from the Start
menu and at ni.com/
manuals.
Contains hardware and
programming support for
NI LabVIEW Instrument Design
Libraries for High Speed Serial
Instruments and the NI 6591 and
NI 6592 modules.
NI PXIe-6591R
Specifications
Available from the Start
menu and at ni.com/
manuals.
Contains specifications for your
NI 6591R module.
Device Front Panels
The following figure shows the available signals on the NI 6591R.
NI PXIe-6591R Getting Started Guide | © National Instruments | 3

Figure 1. NI 6591R Front Panel and Connector Pinouts
GND
RESERVED
GND
RESERVED
GND
RESERVED
GND
RESERVED
GND
RESERVED
GND
RESERVED
GND
RESERVED
GND
RESERVED
GND
RESERVED
GND
RESERVED
GND
RESERVED
GND
RESERVED
RESERVED
RESERVED
GND
Rx+ 1
Rx– 1
GND
Rx+ 3
Rx– 3
GND
SCL
SDA
GND
Tx+ 1
Tx– 1
GND
Tx+ 3
Tx– 3
GND
Optical 3.3 V
GPIO
GND
Rx+ 0
Rx– 0
GND
Rx+ 2
Rx– 2
GND
Optical 3.3 V
EEPROM 3.3 V
GND
Tx+ 0
Tx– 0
GND
Tx+ 2
Tx– 2
GND
x2 (1 per Port)
A1
A2
A3
A4
A5
A6
A7
A8
A9
B1
B2
B3
B4
B5
B6
B7
B8
B9
C1
C2
C3
C4
C5
C6
C7
C8
C9
D1
D2
D3
D4
D5
D6
D7
D8
D9
NI PXIe-6591R
ACCESS
CLK IN/
OUT
DIGITAL DATA & CONTROL
PORT
0
PORT
1
ACTIVE
12.5 Gbps Serial Digital
GND
GND
DIO 1
DIO 3
GND
DIO 5
RESERVED
RESERVED
RESERVED
DIO 7
GND
DIO 9
GND
DIO 11
GND
DIO 13
GND
DIO 15
GND
DIO 17
GND
DIO 19
RESERVED
GND
DIO 0
RESERVED
DIO 2
GND
DIO 4
GND
DIO 6
GND
DIO 8
GND
DIO 10
GND
DIO 12
RESERVED
DIO 14
GND
DIO 16
GND
DIO 18
GND
68
67
66
65
64
63
62
61
60
59
58
57
56
55
54
53
52
51
50
49
48
47
46
45
44
43
42
41
40
39
38
37
36
35
23
22
21
19
33
34
32
31
30
29
28
27
26
25
24
20
18
17
15
14
13
11
12
16
10
9
8
7
6
5
4
3
2
1
Verifying the System Requirements
To use the NI LabVIEW Instrument Design Libraries for High Speed Serial Instruments
instrument driver, your system must meet certain requirements.
Refer to the product readme, which is available on the driver software media or online at
ni.com/manuals, for more information about minimum system requirements,
recommended system, and supported application development environments (ADEs).
4| ni.com | NI PXIe-6591R Getting Started Guide

NI 6591R Kit Contents
The following items are included in the device kit:
• The NI 6591R
• The NI LabVIEW Instrument Design Libraries for High Speed Serial Instruments driver
software media
• Other included items:
–Read Me First: Safety and Electromagnetic Compatibility
–Maintain Forced-Air Cooling Note to Users
Preparing the Environment
Ensure that the environment you are using the NI 6591R in meets the following specifications.
Operating ambient temperature
(IEC-60068-2-1, IEC-60068-2-2)
0 °C to 45 °C
Operating relative humidity (IEC-60068-2-56) 10% to 90%, noncondensing
Maximum altitude 2,000 m (800 mbar)
(at 25 °C ambient temperature)
Pollution degree 2
Indoor use only.
Caution Clean the hardware with a soft, nonmetallic brush. Make sure that the
hardware is completely dry and free from contaminants before returning it to
service.
Note Refer to the NI PXIe-6591R Specifications at ni.com/manuals for complete
specifications.
Unpacking the Kit
Caution To prevent electrostatic discharge (ESD) from damaging the device,
ground yourself using a grounding strap or by holding a grounded object, such as
your computer chassis.
1. Touch the antistatic package to a metal part of the computer chassis.
2. Remove the device from the package and inspect the device for loose components or any
other sign of damage.
Caution Never touch the exposed pins of connectors.
NI PXIe-6591R Getting Started Guide | © National Instruments | 5

Note Do not install a device if it appears damaged in any way.
3. Unpack any other items and documentation from the kit.
Store the device in the antistatic package when the device is not in use.
Installing the Software
You must install the NI LabVIEW Instrument Design Libraries for High Speed Serial
Instruments driver software before installing the NI 6591R.
1. Install LabVIEW. Refer to the LabVIEW Installation Guide for installation instructions
and system requirements. Refer to the LabVIEW Upgrade Notes for additional
information about upgrading to the most recent version of LabVIEW.
Documentation for LabVIEW is available at ni.com/manuals and by selecting Start»All
Programs»National Instruments»LabVIEW»LabVIEW Manuals.
2. Install the LabVIEW FPGA Module. Refer to the LabVIEW FPGA Module Release and
Upgrade Notes for installation instructions and information about getting started with the
LabVIEW FPGA Module.
Documentation for the LabVIEW FPGA Module is available is available at ni.com/
manuals and by selecting Start»All Programs»National Instruments»LabVIEW»
LabVIEW Manuals.
3. Install the NI LabVIEW Instrument Design Libraries for High Speed Serial Instruments
Help driver. Refer to the NI High Speed Serial Instruments Readme on the NI LabVIEW
Instrument Design Libraries for High Speed Serial Instruments installation media for
system requirements and installation instructions for the NI LabVIEW Instrument Design
Libraries for High Speed Serial Instruments driver.
Documentation for the NI LabVIEW Instrument Design Libraries for High Speed Serial
Instruments driver is available at ni.com/manuals and by selecting Start»All Programs»
National Instruments»High Speed Serial Instruments»High Speed Serial
Instruments Documentation.
Installing the NI 6591R Module
Note You must install the software before you install the hardware.
1. Power off and unplug the chassis. Refer to your chassis manual to install or configure the
chassis.
2. Identify a supported module slot in the chassis. The figure below shows the symbols that
indicate the slot types in the chassis.
6| ni.com | NI PXIe-6591R Getting Started Guide

Figure 2. Symbols for Module Slots
NI PXIe-1062Q
1
2
3
4
5
1. PXI Express System Controller Slot
2. PXI Peripheral Slot
3. PXI Express Hybrid Peripheral Slot
4. PXI Express System Timing Slot
5. PXI Express Peripheral Slot
PXI Express devices can be placed only in PXI Express slots and PXIe Express Hybrid
slots. Refer to the chassis documentation for details.
3. Remove the filler panel of an unused module slot.
4. Touch any metal part of the chassis to discharge any static electricity. Place the module
edges into the module guides at the top and bottom of the chassis, and slide the module
into the chassis until the module is fully inserted.
5. Secure the device front panel to the chassis front panel mounting rail using the front panel
mounting screws.
6. Plug in and power on the chassis.
Configuring the NI 6591R in MAX
Use Measurement & Automation Explorer (MAX) to configure your National Instruments
hardware. MAX informs other programs about which devices reside in the system and how
they are configured. MAX is automatically installed with NI LabVIEW Instrument Design
Libraries for High Speed Serial Instruments.
1. Launch MAX by navigating to Start»All Programs»National Instruments»NI MAX or
by clicking the NI MAX desktop icon.
2. In the Configuration pane, double-click Devices and Interfaces to see the list of installed
devices. Installed devices appear under the name of their associated chassis.
3. Expand your Chassis tree item. MAX lists all devices installed in the chassis. Your
default device names may vary.
Note If you do not see your device listed, press <F5> to refresh the list of
installed devices. If the device is still not listed, power off the system, ensure
the device is correctly installed, and restart.
4. Record the device identifier MAX assigns to the hardware. Use this identifier when
programming the NI 6591R.
5. Close MAX.
NI PXIe-6591R Getting Started Guide | © National Instruments | 7

Accessing Sample Projects
NI LabVIEW Instrument Design Libraries for High Speed Serial Instruments includes sample
projects to help you get started designing for the NI 6591R.
1. Open LabVIEW and select Create Project.
2. In the Create Project dialog box, select High-Speed Serial and select a sample project
for your device.
3. Click Next.
4. Configure the Project Name, Project Root, and File Name Prefix (Optional) fields.
5. Click Finish.
Troubleshooting
What Should I Do if the NI 6591R Doesn't Appear in
MAX?
1. In the MAX configuration tree, click Devices and Interfaces.
2. Expand the Chassis tree to see the list of installed devices, and press <F5> to refresh the
list.
3. If the module is still not listed, power off the system, ensure that all hardware is correctly
installed, and restart the system.
4. Navigate to the Device Manager.
Operating System Description
Windows 8.x/8 Right-click the Start screen, and select All apps»Control Panel»
Hardware and Sound»Device Manager.
Windows 7 Select Start»Control Panel»System»Hardware»Device Manager.
5. If you are using a PXI controller, verify that a National Instruments entry appears in the
system device list. Reinstall NI LabVIEW Instrument Design Libraries for High Speed
Serial Instruments and the device if error conditions appear in the list. If you are using an
MXI controller, right-click PCI-to-PCI Bridge, and select Properties from the shortcut
menu to verify that the bridge is enabled.
Where to Go Next
Refer to the following figure for information about other product tasks and associated
resources for those tasks.
8| ni.com | NI PXIe-6591R Getting Started Guide

custom applications within
an application programming
interface (API).
about hardware features
or review device specifications.
more about your products through ni.com.
the application development
environment (ADE)
for your application.
*This item is also installed with the driver software.
EXPLORE LEARN CREATE
DISCOVER
Support
ni.com/support
NI PXIe-6592R
Specifications*
NI PXIe-6592R
Getting Started Guide*
NI PXIe-6591R
Specifications*
NI PXIe-6591R
Getting Started Guide*
NI High Speed Serial
Instruments User Manual
NI High Speed Serial
Instruments Help*
Located at ni.com/manuals and from the Start menu
High-Speed Serial
ni.com/software-designed-instruments
Services
ni.com/services
Located at ni.com/gettingstarted
Learn LabVIEW Basics
Worldwide Support and Services
The National Instruments website is your complete resource for technical support. At ni.com/
support, you have access to everything from troubleshooting and application development
self-help resources to email and phone assistance from NI Application Engineers.
Visit ni.com/services for NI Factory Installation Services, repairs, extended warranty, and
other services.
Visit ni.com/register to register your National Instruments product. Product registration
facilitates technical support and ensures that you receive important information updates from
NI.
A Declaration of Conformity (DoC) is our claim of compliance with the Council of the
European Communities using the manufacturer’s declaration of conformity. This system
affords the user protection for electromagnetic compatibility (EMC) and product safety. You
can obtain the DoC for your product by visiting ni.com/certification. If your product supports
calibration, you can obtain the calibration certificate for your product at ni.com/calibration.
NI PXIe-6591R Getting Started Guide | © National Instruments | 9

National Instruments corporate headquarters is located at 11500 North Mopac Expressway,
Austin, Texas, 78759-3504. National Instruments also has offices located around the world.
For telephone support in the United States, create your service request at ni.com/support or
dial 1 866 ASK MYNI (275 6964). For telephone support outside the United States, visit the
Worldwide Offices section of ni.com/niglobal to access the branch office websites, which
provide up-to-date contact information, support phone numbers, email addresses, and current
events.
Refer to the NI Trademarks and Logo Guidelines at ni.com/trademarks for information on National Instruments trademarks.
Other product and company names mentioned herein are trademarks or trade names of their respective companies. For patents
covering National Instruments products/technology, refer to the appropriate location: Help»Patents in your software, the
patents.txt file on your media, or the National Instruments Patent Notice at ni.com/patents. You can find information about
end-user license agreements (EULAs) and third-party legal notices in the readme file for your NI product. Refer to the Export
Compliance Information at ni.com/legal/export-compliance for the National Instruments global trade compliance policy and
how to obtain relevant HTS codes, ECCNs, and other import/export data. NI MAKES NO EXPRESS OR IMPLIED WARRANTIES
AS TO THE ACCURACY OF THE INFORMATION CONTAINED HEREIN AND SHALL NOT BE LIABLE FOR ANY ERRORS.
U.S. Government Customers: The data contained in this manual was developed at private expense and is subject to the
applicable limited rights and restricted data rights as set forth in FAR 52.227-14, DFAR 252.227-7014, and DFAR 252.227-7015.
© 2014—2015 National Instruments. All rights reserved.
376274B-01 Jun15