National Instruments NI 5402 User manual

NI Signal Generators Getting Started Guide
このドキュメントには、日本語ページも含まれています。
This document explains how to install, congure, and test National Instruments signal generators for
generating arbitrary and standard function waveforms using National Instruments software.
This document applies to the following devices:
• NI 5402
• NI 5404
• NI 5406
• NI 5412
• NI 5421
• NI 5422
• NI 5441
• NI 5442
• NI 5450
• NI 5451
The NI Signal Generators Help includes more information about these devices, including signal generator
features and programming.
For free downloads of the most current versions of documentation, visit ni.com/manuals. For the latest
version of NI-FGEN, visit ni.com/idnet.
Contents
Conventions.............................................................................................................................................2
Related Documentation............................................................................................................................3
Verifying the System Requirements.........................................................................................................3
Unpacking................................................................................................................................................4
Verifying the Kit Contents.......................................................................................................................4
Electromagnetic Interference (EMI) Gasket....................................................................................4
Other Required Items.......................................................................................................................4
Installing the Software.............................................................................................................................5
Installing the Hardware............................................................................................................................5
Cooling Considerations for PXI and PCI Devices...........................................................................6
Installing PXI and PXI Express Modules........................................................................................6
Uninstalling PXI and PXI Express Modules...................................................................................7
Installing PCI Devices.....................................................................................................................7
Power On Your Computer or PXI Chassis...............................................................................................9
Conguring and Testing in MAX............................................................................................................9
Setting up Synchronization in MAX......................................................................................................10
Generating Waveforms Interactively.....................................................................................................11
Generating a Standard Waveform..................................................................................................11
Generating an Arbitrary Waveform...............................................................................................12

Generating Waveforms Programmatically.............................................................................................12
NI-FGEN Examples.......................................................................................................................13
NI-FGEN Instrument Driver..........................................................................................................13
Creating and Editing Waveforms...........................................................................................................13
Appendix A: Front Panels......................................................................................................................14
Where to Go for Support........................................................................................................................22
Conventions
Angle brackets that contain numbers separated by an ellipsis represent a range
of values associated with a bit or signal name—for example, AO <0..3>.
< >
Square brackets enclose optional items—for example, [response].[ ]
The » symbol leads you through nested menu items and dialog box options to
a nal action. The sequence File»Page Setup»Options directs you to pull
down the File menu, select the Page Setup item, and select Options from the
last dialog box.
»
The indicates that the following text applies only to a specic product, a
specic operating system, or a specic software version.
This icon denotes a tip, which alerts you to advisory information.
This icon denotes a note, which alerts you to important information.
This icon denotes a caution, which advises you of precautions to take to avoid
injury, data loss, or a system crash.
When symbol is marked on a product, it denotes a warning advising you to
take precautions to avoid electrical shock.
When symbol is marked on a product, it denotes a component that may be hot.
Touching this component may result in bodily injury.
Bold text denotes items that you must select or click in the software, such as
menu items and dialog box options. Bold text also denotes parameter names.
Bold
Italic text denotes variables, emphasis, cross-references, or an introduction to
a key concept. Italic text also denotes text that is a placeholder for a word or
value that you must supply.
italic
Text in this font denotes text or characters that you should enter from the
keyboard, sections of code, programming examples, and syntax examples. This
font is also used for the proper names of disk drives, paths, directories,
programs, subprograms, subroutines, device names, functions, operations,
variables, lenames, and extensions.
monospace
Bold text in this font denotes the messages and responses that the computer
automatically prints to the screen. This font also emphasizes lines of code that
are different from the other examples.
monospace bold
Italic text in this font denotes text that is a placeholder for a word or value that
you must supply.
monospace italic
NI Signal Generators Getting Started Guide 2ni.com

Related Documentation
The following table lists resources referenced in this document and describes where to nd them. After
you install NI-FGEN, you can access NI-FGEN documentation at Start»All Programs»National
Instruments»NI-FGEN»Documentation. Refer to ni.com/manuals to download the latest versions of
documentation.
Table 1. Related Documentation Descriptions and Locations
Contains information about device-specic content for all NI signal generators,
concepts, detailed VI and function references for the NI-FGEN instrument
driver, fundamentals of waveforms and video signals, and getting started steps
for creating an application with NI-FGEN and your ADE. Located at Start»
All Programs»National Instruments»NI-FGEN»Documentation.
NI Signal Generators Help
Contains detailed information about device performance and specications.
Located at Start»All Programs»National Instruments»NI-FGEN»
Documentation.
Device Specications
Contains important information regarding NI-FGEN, such as new features,
supported hardware, system requirements, le locations, and known issues.
Located at Start»All Programs»National Instruments»NI-FGEN»
Documentation.
NI-FGEN Instrument Driver
Readme
Contains information about using the FGEN SFP to interactively generate
waveforms. Located at Help»FGEN SFP Help or Help»Show Context Help
from within the SFP. For device-specic help, select Help»Hardware-Specic
Help in the SFP.
FGEN Soft Front Panel Help
Contains information on conguring and testing data acquisition (DAQ) devices
using Measurement & Automation Explorer (MAX) for NI-DAQmx, and
special considerations for operating systems.Located at Help»Help Topics»
NI-DAQmx»MAX Help for NI-DAQmx in MAX.
Measurement & Automation
Explorer Help for NI-DAQmx
Contains information about how to congure your remote systems or devices
with Measurement & Automation Explorer (MAX). Located at Help»Help
Topics»Remote Systems in MAX.
Measurement & Automation
Explorer Remote Systems Help
Contains important cooling information for many PXI, PXIe, PCI, and PCIe
hardware modules. Ships in the device kit.
Maintain Forced-Air Cooling
Note to Users
Contains information for adding an EMI gasket to a PXI module to reduce
high-frequency emissions. Ships in the device kit.
Retrotting Your PXI Module
Note to Users
Contains safety instructions and electromagnetic compatibility (EMC)
information for the hardware it accompanies. Ships in the device kit.
Read Me First: Safety and
Electromagnetic Compatibility
Verifying the System Requirements
To use an NI signal generator with NI-FGEN, your system must meet certain requirements.
The NI-FGEN Instrument Driver Readme includes more information about minimum and recommended
system requirements and supported application development environments (ADEs).
©National Instruments Corporation 3NI Signal Generators Getting Started Guide

Unpacking
The device ships in an antistatic envelope to prevent electrostatic discharge (ESD). ESD can damage
several components on the device.
Caution Never touch the exposed pins of connectors.
To avoid damage when handling the device, take the following precautions:
• Ground yourself using a grounding strap or by touching a grounded object.
• Touch the antistatic package to a metal part of your computer chassis before removing the device
from the package.
Remove the device from the envelope and inspect it for loose components or any sign of damage. Notify
NI if the device appears damaged in any way. Do not install a damaged device into your computer.
Store the device in the antistatic envelope when not in use.
Verifying the Kit Contents
The following items are included in the NI signal generator kit:
• NI signal generator
• SMB-BNC cable (included with the NI 5404/5412/5421/5422/5441/5442 only)
• NI-FGEN instrument driver DVD sleeve, which contains the following items:
–NI-FGEN DVD, which includes the NI Signal Generators Help
•NI Analog Waveform Editor CD. Eligible hardware kits (NI 5412/5421/5422/5441/5442/5450/5451
only) receive an activation license.
• NI Modulation Toolkit CD. Eligible hardware kits (NI 5441/5442/5450/5451 only) receive an
activation license.
• The following documents:
–NI Signal Generators Getting Started Guide
– The specications document for the NI signal generator
–Read Me First: Safety and Electromagnetic Compatibility
–Maintain Forced-Air Cooling Note to Users (except the NI 5404 devices)
–Retrotting Your PXI Module Note to Users (NI 5402/5406/5412/5421/5422/5441 only)
Electromagnetic Interference (EMI) Gasket
The kit may also include an EMI gasket.
The Retrotting Your PXI Module Note to Users describes under what conditions you should install the
gasket. If needed, the gasket should be installed during the installation of your PXI module.
Related Information
Installing PXI and PXI Express Modules on page 6
Other Required Items
In addition to the items contained in the kit, you need the following items to install your device:
• 1/8 in. Phillips head screwdriver
NI Signal Generators Getting Started Guide 4ni.com

• Cables appropriate for use with your device
For PXI devices
• A PXI chassis, a PXI/SCXI combination chassis, or a PXI/CompactPCI chassis and chassis
documentation
• A PXI controller or MXI bridge
For PXI Express devices
• A PXI Express chassis and chassis documentation
• A PXI Express controller or a MXI-Express bridge
For PCI devices
• A desktop computer with its documentation
Note If your application uses NI-TClk synchronization, you must use a RTSI cable to connect
the devices (PCI NI-DAQmx devices only).
Installing the Software
The NI-FGEN DVD, included with your device, installs the instrument driver for all NI signal generators.
The NI-FGEN DVD also includes the FGEN Soft Front Panel (SFP), which is an easy-to-use, interactive
tool that helps you quickly begin working with the NI signal generator.
To install NI-FGEN, complete the following steps:
1. [Optional] If you are developing an application for the NI signal generator, install an ADE, such
as LabVIEW or LabWindows™/CVI™.
2. Insert the NI-FGEN DVD. The NI-FGEN installer should open automatically.
Note If the installation window does not appear, navigate to the DVD drive, double-click
the drive, and double-click setup.exe.
3. Follow the instructions in the installation prompts. For installation troubleshooting information
contact NI technical support or visit ni.com/support.
Note If you are using Windows Vista, you may see access and security messages during
installation. Accept the prompts to complete the installation.
4. When the installer completes, a dialog box appears that asks if you want to restart, shut down, or
restart later. Select Restart.
5. If you are using a system running the LabVIEW Real-Time Module, download NI-FGEN to the
target using Measurement & Automation Explorer (MAX). Refer to the MAX Explorer Remote
Systems Help.
Installing the Hardware
The following sections contain information about installing hardware for PXI, PXI Express, and PCI
platforms.
Caution You must power off and unplug the computer or chassis before installing the device.
©National Instruments Corporation 5NI Signal Generators Getting Started Guide

To prevent damage to the device caused by ESD or contamination, handle the device using the edges
or the metal bracket. Refer to the Read Me First: Safety and Electromagnetic Compatibility document
for more information about handling your device.
Note You must install the software before installing the hardware.
Cooling Considerations for PXI and PCI Devices
You must maintain an acceptable operating temperature for your device.
Caution When installing an NI-DAQmx device (except the NI 5404), follow the guidelines
in the Maintain Forced-Air Cooling Note to Users document included in the kit to ensure
that the device is cooled effectively.
Thermal Shutdown
If the device temperature rises above the maximum operating temperature, the device shuts down and
MAX or NI-FGEN noties you with an error message.
For information about the operating temperatures for your device, refer to the device specications. To
re-enable the device after thermal shutdown, you must perform a hard reset, using one of the following
methods:
• Power off the computer or chassis that contains the device. After the device has cooled, power on
the computer or chassis and reboot the controller, if necessary.
• Call the niFgen Reset Device VI or the niFgen_ResetDevice function.
•Perform a device reset in MAX. The Measurement & Automation Explorer Help for NI-DAQmx
contains information about resetting a device in MAX.
Review the guidelines in the Maintain Forced-Air Cooling Note to Users and make any necessary
adjustments. The thermal shutdown error is reported until the device has cooled to an acceptable operating
temperature and has been reset successfully.
Installing PXI and PXI Express Modules
Refer to the chassis documentation to determine which slots are designated for PXI Express modules.
To install PXI devices in either a PXI chassis, a PXI/SCXI combination chassis, or a PXI/CompactPCI
chassis or to install PXI Express devices in a PXI Express chassis, complete the following steps:
1. Power off and unplug the chassis.
2. [Optional] If you need to use the provided EMI gasket to reduce high-frequency emissions, install
it now. The Retrotting Your PXI Module Note to Users contains information about installing the
gasket.
3. Position the chassis so that inlet and outlet vents are not obstructed. For more information about
optimal chassis setup, refer to the chassis documentation.
4. Make sure that the ejector handle is in the unlatched (downward) position.
5. Hold the module by the ejector handle and slide it into an empty slot. Make sure that the base
engages with the guides in the chassis, as shown in the following gure.
NI Signal Generators Getting Started Guide 6ni.com

3
2
4
NI PXI-1042
1
1. PXI Chassis
2. Ejector Handle
3. Captive Screw
4. NI PXI Device
Figure 1. PXI Installation
Caution Performance may suffer if both screws are not tightened properly.
6. Slide the module completely into the chassis and latch it by pulling up on the ejector handle. Tighten
the captive screws at the top and bottom of the module front panel.
7. Verify that the chassis exhaust fans are operable and free of dust and other contaminants restricting
airow. You must provide adequate cooling to prevent your device from overheating.
8. Plug in the chassis.
Related Information
Cooling Considerations for PXI and PCI Devices on page 6
Uninstalling PXI and PXI Express Modules
When removing modules, you must power down the chassis.
Hot Surface During operation, the metal surfaces of devices may become hot. Be careful
when removing the device from the chassis or when moving it to a different peripheral slot.
When removing the device, hold it by only the ejector handle and front panel.
Ensure that you are grounded with a grounding strap or are touching a grounded metal surface. To avoid
ESD, do not touch the exposed connector pins or any exposed circuitry on the device. When not in use,
devices should be stored in the original antistatic envelope to avoid damage.
Installing PCI Devices
To install the PCI device, complete the following steps:
1. Power off and unplug the PC.
2. Remove the PC cover.
©National Instruments Corporation 7NI Signal Generators Getting Started Guide

3. Insert the device into an open PCI slot, as shown in the following gure.
Tip To maximize airow and extend the life of the device, leave any adjacent PCI slots
empty.
1
2
3
1. NI PCI Device
2. PCI Slot
3. Computer Chassis
Figure 2. PCI Installation
4. Secure the device with a screw.
Caution It is important to completely screw the device into the PCI slot both for
mechanical stability and for a solid ground connection, which reduces electrical noise.
Improperly secured devices may affect the accuracy of device specications.
Some computer manufacturers use a securing lever made of plastic to secure PCI devices;
such a lever is unacceptable and must be removed. Use the screw provided in the kit to
secure the device. Otherwise, you must use a different computer chassis.
5. Verify that the computer exhaust fans are operable and free of dust and other contaminants restricting
airow. You must provide adequate cooling to prevent your device from overheating.
6. Replace the PC cover.
7. Plug in the PC.
Related Information
Cooling Considerations for PXI and PCI Devices on page 6
NI Signal Generators Getting Started Guide 8ni.com

Power On Your Computer or PXI Chassis
Windows recognizes any newly installed device the rst time you restart the computer after hardware
is installed. On some Windows systems, the Found New Hardware wizard opens with a dialog box for
every NI device installed. Install the software automatically (Recommended) is selected by default.
Click Next or Yes to install the software for each device.
• PXI or PXI Express devices controlled using MXI—Power the PXI chassis before you power on
the PC.
• PCI devices—Verify that spread-spectrum clocking is enabled in the PC BIOS. Refer to the PC
user documentation for information about how to verify this setting if it is available.
Caution Spread-spectrum clocking varies the clock signal to spread the timing clock signal
over a small frequency range. Disabling spread-spectrum clocking may affect the accuracy
of the signal generator specications.
Configuring and Testing in MAX
Complete the following steps to congure and test your device:
1. Launch MAX.
2. In the conguration pane, double-click Devices and Interfaces and expand the NI-DAQmx Devices
folder.
Note If you are using a remote RT target, expand Remote Systems, nd and expand
your target, and then expand Devices and Interfaces.
Figure 3. MAX Configuration Pane
3. Check that your device appears under Devices and Interfaces. If your device does not appear,
press <F5> to refresh the view in MAX. If the device is still not recognized, refer to ni.com/support.
Note If you are using a MXI interface to control a PXI or PXI Express chassis and
encounter performance or initialization issues, refer to your MXI documentation to verify
the system requirements and to ensure that the MXI interface is properly congured.
Software optimization might be necessary. For MXI-3 optimization, select Start»All
©National Instruments Corporation 9NI Signal Generators Getting Started Guide

Programs»National Instruments MXI-3»MXI-3 Optimization. MXI-4 and
MXI-Express optimization are performed automatically by the hardware.
4. Perform a device self-test to verify installation by right-clicking the device and selecting Self-Test.
A dialog box appears and indicates whether the device passed the test. When the self-test nishes,
a message indicates either successful verication or that an error occurred.
Note If the device does not pass the self-test, reboot your system and repeat
steps 1 through 4. If the device still does not pass the self-test, refer to ni.com/support.
5. Congure the device settings by completing the following steps:
a. Record the device number or device name assigned to the device. You need this number when
programming the device.
• The assigned device name is appended to the device in its conguration tree label. For
example, after installing the NI 5421, the device conguration tree label may appear as
NI PXI-5421: <Dev1>, where Dev1 is the device name. When developing your
application, the resource name for your device is the device name MAX assigned to the
device. You can rename NI-DAQmx devices by right-clicking the device and selecting
Rename.
b. PCI only—Right-click the NI signal generator in the list and select Properties.
c. PCI only—Select the appropriate tab to set the conguration options. The conguration options
you see depend on the device.
d. Click OK to close the window.
Setting up Synchronization in MAX
If you plan to share triggers or clocks to synchronize the devices, you must identify or congure certain
components in MAX.
Note The following sections contain information required for any type of synchronization,
including NI-TClk synchronization. For information about NI-TClk synchronization, refer to
Programming»NI-TClk Synchronization Help in the NI Signal Generators Help.
PXI Devices
Identify the PXI system controller by completing the following steps:
1. In the MAX Conguration tree under Devices and Interfaces, right-click PXI System»Identify As
and select your controller from the list. For example, select External PC if you are using a MXI
controller in an external PC.
2. Expand the PXI System tree and select the chassis name to identify the chassis you are using.
PXI Express devices controlled using MXI-Express
Identify the PXI Express system controller in the MAX Conguration tree under Devices and Interfaces
by right-clicking PXI System»Identify As, and selecting External PC. Your chassis is automatically
identied.
PXI Express devices controlled using a PXI Express controller
PXI Express controllers installed in a PXI Express chassis are automatically identied in MAX.
NI Signal Generators Getting Started Guide 10 ni.com

PCI Devices
Congure the RTSI cable by completing the following steps:
1. Connect a RTSI cable between the PCI devices to physically share triggers or clocks.
2. In the MAX Conguration tree under Devices and Interfaces, right-click NI-DAQmx Devices.
3. Select Create New NI-DAQmx Device»RTSI Cable.
4. To add a device to a RTSI cable, right-click on the RTSI cable name in the Conguration tree and
select Add Device to RTSI Cable.
Generating Waveforms Interactively
You can interactively generate arbitrary and standard function waveforms using the FGEN Soft Front
Panel (SFP).
Figure 4. FGEN Soft Front Panel
Generating a Standard Waveform
To generate a standard waveform using the FGEN Soft Front Panel, complete the following steps:
Note The NI 5450 does not support standard waveform generation. You can use arbitrary
waveform generation when using the NI 5450 and the FGEN SFP.
1. Launch the FGEN SFP from Start»All Programs»National Instruments»NI-FGEN»FGEN Soft
Front Panel.
2. Verify that the device you installed appears on the FGEN SFP display. You can choose a different
signal generator by navigating to Edit»Device Conguration to launch the device conguration
dialog box and selecting a device from the Device list.
3. Click the Standard Function Mode button ( ) to congure your device for standard function
generation.
4. Set the frequency, amplitude, offset, and type of waveform that you want to generate by using the
drop-down listbox to choose the setting to congure and then using the knob to control the value.
©National Instruments Corporation 11 NI Signal Generators Getting Started Guide

5. Click the Run button ( ) to initiate waveform generation.
The FGEN SFP default settings instruct the signal generator to generate a continuous sine wave at a
frequency of 1 MHz, with a peak-to-peak amplitude of 1 V into a 50 Ω load, and no offset. The FGEN
SFP Help includes more information about the FGEN SFP.
Generating an Arbitrary Waveform
To generate an arbitrary waveform using the FGEN Soft Front Panel, complete the following steps:
Note NI 5402/5404/5406 devices do not support arbitrary waveform generation.
1. Launch the FGEN SFP from Start»All Programs»National Instruments»NI-FGEN»FGEN Soft
Front Panel.
2. Verify that the device you installed appears on the FGEN SFP display. You can choose a different
signal generator by navigating to Edit»Device Conguration to launch the device conguration
dialog box and selecting a device from the Device list.
3. (NI 5450/5451 only) Select a channel from the Channel list where you want the waveform
congured. When using the NI 5450/5451 to generate waveforms on multiple channels, perform
steps 4 through 8 to load a waveform on to each channel on which you want to generate.
4. Click the Single Arbitrary Waveform Mode button ( ) to congure your device for arbitrary
waveform generation.
5. Click the Download Waveform button ( ) to download a waveform to the device onboard
memory.
6. Select Load Waveform from disk. The Select File dialog box opens and displays waveform
example les. You also can download a waveform by selecting File»Load New Waveform. For
the installation location of the example waveforms, refer to the NI-FGEN Instrument Driver Readme.
7. Select a waveform such as arbMode-sine.lvm and click OK. The File Load dialog box
and Waveform Preview window launch. You can close or minimize the Waveform Preview window.
8. In the File Load dialog box, select one of the following settings from the Waveform drop-down
listbox:
• NI 5412—sine, 16MHz@40MS/s
• All other signal generators—sine, 40MHz@100MS/s
9. Click OK.
10. Click the Run button to initiate waveform generation. To optimize the sine wave shape, select
Edit»Device Conguration, and change the lter settings.
The FGEN SFP default settings instruct the arbitrary waveform generator to generate a continuous sine
wave, with a peak-to-peak amplitude of 1 V into a 50 Ω load, and no offset. The FGEN SFP Help
includes more information about the FGEN SFP.
Tip You can use the NI Analog Waveform Editor to create arbitrary waveform les.
Generating Waveforms Programmatically
You can control your signal generator programmatically with an ADE using the supplied NI-FGEN
Interchangeable Virtual Instrument (IVI) driver. You also can run the NI-FGEN examples to demonstrate
the functionality of your device.
NI Signal Generators Getting Started Guide 12 ni.com

NI-FGEN Examples
Examples demonstrate the functionality of the device, serving as programming models and building
blocks for your own applications.
The NI Example Finder is a utility available for some software applications that organizes examples
into categories and allows you to easily browse and search installed examples. You can see descriptions
and compatible hardware models for each example or see all the examples compatible with one particular
hardware model.
Example locations are shown in the following table.
Table 2. NI-FGEN Example Locations
Locating ExamplesSoftware Application
Locate examples with the NI Example Finder. Within
LabVIEW or LabWindows/CVI, select Help»Find
Examples and navigate to Hardware Input and
Output»Modular Instruments.
LabVIEW or LabWindows™/CVI™
Locate examples in the
<NIDocDir>\NI-FGEN\examples directory, where
<NIDocDir> is one of the following directories:
• (Windows 2000/XP) Documents and
Settings\All Users\Shared
Documents\National Instruments
• (Windows Vista)
Users\Public\Documents\National
Instruments
ANSI C or Visual Basic
NI-FGEN Instrument Driver
The NI-FGEN API features a set of operations and attributes that exercise all the functionality of the
device, including conguration, control, and other device-specic functions.
The NI Signal Generators Help includes information about programming with NI-FGEN.
Creating and Editing Waveforms
The NI Analog Waveform Editor is an interactive software tool for creating and editing analog waveforms.
To view or edit existing waveforms, you can open and resample data les saved in binary or ASCII le
formats. Once a waveform is imported, you can view and edit your waveforms. You can also create new
waveforms by selecting from a library of more than 20 waveform primitives or by entering mathematical
expressions.
©National Instruments Corporation 13 NI Signal Generators Getting Started Guide

Figure 5. The NI Analog Waveform Editor
Tip The NI Analog Waveform Editor can be activated with the serial number provided in the
kits with an eligible hardware purchase. You can also purchase the NI Analog Waveform Editor
at ni.com.
Appendix A: Front Panels
This section contains front panel connector gures and connector description tables that describe the
signal connection options for NI signal generators.
The NI Signal Generators Help includes signal descriptions, connector pin assignments, and routing
information.
NI PXI/PCI-5402/5406
The NI 5402 is a 20 MHz bandwidth,14-bit arbitrary function generator. The NI 5406 is a 40 MHz
bandwidth, 16-bit arbitrary function generator. These devices have four BNC connectors, as shown in
the following gure. Signal descriptions are listed in the following table.
NI Signal Generators Getting Started Guide 14 ni.com

ACCESS ACTIVE
S YNC OUT /
PFI 0
PFI 1
NI PXI-540 2
REF IN
CH 0
NI PCI-5402
REF
IN
SYNC
OUT/
PFI 0
PFl 1
CH 0
Figure 6. NI PXI/PCI-5402 Front Panel (NI PXI/PCI-5406 devices include the same connectors)
Table 3. NI PXI/PCI-5402/5406 Front Panel Connectors
FunctionAccessConnector
Provides the waveform output.OutputCH 0
Accepts a PLL Reference clock from
an external source and can frequency
lock the Sample clock timebase to
the external Reference clock.
InputREF IN
Provides a TTL-level output of the
waveform being generated on CH 0.
SYNC OUT/ PFI 0 can also be
congured to accept a trigger from
an external source that can start or
step through waveform generation
or can route signals from several
clock, event, and trigger sources.
Input/OutputSYNC OUT/PFI 0
©National Instruments Corporation 15 NI Signal Generators Getting Started Guide

FunctionAccessConnector
Accepts a trigger from an external
source that can start or step through
waveform generation or can route
signals from several clock, event,
and trigger sources.
Input/OutputPFI 1
NI PXI-5404
The NI PXI-5404 is a 100 MHz frequency generator. The NI PXI-5404 has ve SMB connectors, as
shown in the following gure. Signal descriptions are listed in the following table.
SINE
REF
OUT
REF
IN
PFI 0
CH 0
CLOCK
ACCESS ACTIVE
NI PXI-540 4
100 MHz Freq Source
Figure 7. NI PXI-5404 Front Panel
Table 4. NI PXI-5404 Front Panel Connectors
FunctionAccessConnector
Provides a sine waveform of the
desired frequency output.
OutputSINE
Provides a TTL version of the sine
waveform being generated at the
SINE connector.
OutputCLOCK
NI Signal Generators Getting Started Guide 16 ni.com

FunctionAccessConnector
Accepts either a TTL signal to start
waveform generation, or provides an
output to synchronize—or
trigger—other devices at a certain
time within waveform generation.
Input/OutputPFI 0
Routes signals from the PXI
backplane clock, PXI trigger lines,
or a divided-down version of
the internal NI 5404 clock.
OutputREF OUT
Accepts a PLL Reference clock from
an external source and can frequency
lock the NI PXI-5404 Sample clock
timebase to the external Reference
clock.
InputREF IN
NI PXI/PCI-5412/5421/5422/5441
The NI 5412 is a 100 MS/s, 20 MHz, 14-bit arbitrary waveform generator. The NI 5421 is a 100 MS/s,
43 MHz, 16-bit arbitrary waveform generator. The NI 5422 is a 200 MS/s, 80 MHz, 16-bit arbitrary
waveform generator. The NI 5441 is a 100 MS/s, 43 MHz, 16-bit arbitrary waveform generator with
onboard signal processing (OSP). These devices have up to ve connectors—four SMB connectors and
one 68-pin male VHDCI connector, as shown in the following gure. Signal descriptions are listed in
the following table.
©National Instruments Corporation 17 NI Signal Generators Getting Started Guide

PFI 0
PFI 1
NI PXI-54X X
ACCESS ACTIVE
CLK
IN
CH 0
DIGITAL DATA & CON TROL
CH
0
PFl
0
DIGITAL DATA & CON TROL
NI PCI-54XX
CLK
IN
PFl
1
Figure 8. NI PXI/PCI-5421 Front Panel (NI PXI/PCI-5412/5422/5441 devices are similar)
Note The DIGITAL DATA & CONTROL (DDC) connector is not available on the NI 5412
or the NI 5421/5422 with the 8 MB memory option.
Table 5. NI PXI/PCI-5412/5421/5422/5441 Front Panel Connectors
FunctionAccessConnector
Provides the waveform output.OutputCH 0
Accepts a PLL Reference clock from
an external source and can frequency
lock the Sample clock timebase to
the external Reference clock. The
signal on this connector can also be
used as a Sample clock source.
InputCLK IN
NI Signal Generators Getting Started Guide 18 ni.com

FunctionAccessConnector
Accepts a trigger from an external
source that can start or step through
waveform generation, or can route
signals out from several clock, event,
and trigger sources.
Input/OutputPFI 0
Accepts a trigger from an external
source that can start or step through
waveform generation or can route
signals from several clock, event,
and trigger sources.
Input/OutputPFI 1
Routes the 16-bit digital pattern
outputs, digital pattern clock output,
trigger outputs, trigger inputs, and a
clock input.
Input/OutputDIGITAL DATA & CONTROL
(DDC)
NI PXIe-5442
The NI 5442 is a PXI Express, 100 MS/s, 43 MHz, 16-bit arbitrary waveform generator with OSP. The
NI 5442 has four SMB connectors, as shown in the following gure. Signal descriptions are listed in
the following table.
©National Instruments Corporation 19 NI Signal Generators Getting Started Guide

PFI 0
PFI 1
NI PXIe- 5442
ACCESS ACTIVE
CLK
IN
CH 0
100 MS/s AWG OSP
Figure 9. NI PXIe-5442 Front Panel
Table 6. NI PXIe-5442 Front Panel Connectors
FunctionAccessConnector
Provides the waveform output.OutputCH 0
Accepts a PLL Reference clock from
an external source and can frequency
lock the Sample clock timebase to
the external Reference clock. The
signal on this connector can also be
used as a Sample clock source.
InputCLK IN
Accepts a trigger from an external
source that can start or step through
waveform generation or can route
signals from several clock, event,
and trigger sources.
Input/OutputPFI 0
NI Signal Generators Getting Started Guide 20 ni.com