National Lighting TL-4000 Operator's manual

LED TABLE LAMP SERIES -
TL-4000
Brightness Control
5-step brightness dimming control
Operating Modes
Read Mode (5,300K)
A good mixture of white and warm white lights stimulates concentration and
reduces eye strains
Study Mode (6,200K)
High color temperature output helps user stays focus and alert when working
on important tasks.
Relax Mode (4,200K)
Promotes relaxation along with improved mood and the choice of
low-range color temperature.
Sleep Mode (3,300K)
Encourage a deep sleep with the comfort of soft/ warm light.
USB Power Charging Port
The USB port supplies DC 5V output up to 700mA for charging mobile
devices that is capable of USB charging.
Timer Control Function
Automatically turns-off the light in one (1) hour
One Touch Control Function
Power On/Off the table lamp
ŸProduct Name: LED table lamp with wireless charger
ŸModel# TL-4000
ŸLight Source: Side-emitted LED panel
ŸLumen Output: 960 lumen max.
ŸColor Temperature: 3,300K - 6,200K (4 preset modes)
ŸDimming: 5 levels
ŸGlare, flicker, shadow and UV free
ŸBuilt-in Qi wireless charger
ŸBuilt-in USB charger for mobile devices
ŸAdjustable arm for maximized light coverage
ŸPower input: AC 100-240V power adapter with DC 12V 2A
output
ŸDimensions: 7.125” X 6.75” X 17.92”
Control Panel
Specications & Features
Read Mode
Study Mode
Relax Mode
Sleep Mode
Brightness Control
Timer Control
One Touch Power Control

Adjustments
Arm
Head
Base
Cautions
Do not try to repair, disassemble
or modify this unit under any
circumstances.
Do not place the unit near any
heat source or under direct
sunlight.
Place on at, secured surfaces. Use only with the supplied
AC/DC power adapter
Stop using the unit immediately
when the power supply cord is
damaged.
Do not touch any part of this unit
with wet hands or when liquids
are present.
Please keep the unit dry and
clean at all times.
Unplug the unit from wall outlet
when it is not planned to be used
for an extended period of time.
Use a soft, dry cloth to clean the
unit. Do not use solvents or
cleaning solutions.
Do not overload electrical circuits
as it may cause electrical shock or
re hazards.
Operation Instructions
USB Charging Port
Qi Wireless Charging USB Charging
Control Panel
Select the desired lighting
mode by touching the
correspond icon.
Adjust the brightness level by
touching left or right arrows.
Place the Qi enabled wireless
charging mobile device on
top of the surface. Align the
center of your mobile device
with the Qi logo on the lamp
base. Charging icon on the
mobile device should appear
showing it is charging.
Plug the USB cable into the
USB charging port and
connect the mobile device to
the other end of the USB
cable. Charging icon on the
mobile device should appear
showing it is charging.