Nauticam 16345 User manual

INSTRUCTION MANUAL
For Nauticam Cinema Gear Set for
Canon RF 15-30mm F4 5-6 3 IS STM
PN# 16345
Thank you for your purchase of a NAUTICAM
product.
At NAUTICAM we pride ourselves in the ability to
recognize the requirements of professional as well
as amateur underwater photographers and fulfill
them through the innovative designs of our
products. We strive to achieve a high level of
user-friendliness by allowing stress-free
installation and easy operation of all important
functions of the camera.
Each product is individually inspected and water
pressure tested to ensure optimum quality.
Please read this manual carefully before using the
product this will maximize its performance as well
as its lifetime.
FORWORD
Current as of 01/13/2023

All NAUTICAM Products are warranted against
any material and manufacturing defects for two
years from the date of purchase for consumer
use. This warranty only applies to products
purchased from authorized NAUTICAM dealers
and does not extend beyond the original retail
purchaser.
To return your product for service please
contact your regional authorized service
center(s). Please note that this warranty only
applies when the product is purchased in the
territory where the service center is located.
NAUTICAM does not hold responsibility for
damage of any nature to any equipment used
with and/or placed within our products.
NAUTICAM accepts no liability for any loss of
captured images or the inability to capture
images even if it is due to the malfunctioning of
our products.
Unauthorized modifications and/or repairs of
our products will automatically invalidate the
warranty.
WARRANTY

IDENTIFICATION OF PARTS
Plastic C-ring for zoom gear
CR1530-Z Cinema Zoom Gear
Plastic C-ring for focus gear
CR1530-F Cinema Focus Gear

MOUNT THE GEARS ON A LENS
1. Insert the plastic C-ring for zoom gear
as shown and place it over the lens.
2 Insert the plastic C-ring for focus gear
as shown and place it over the lens and
plastic C-ring for zoom gear.
3. Insert the focus gear on a plastic C-ring
for the focus gear until it reaches the
flange of the plastic C-ring.

MOUNT THE GEARS ON A LENS
4. Insert the zoom gear on a plastic C-ring
for the zoom gear until it reaches the
flange of the plastic C-ring.
5. To remove the Cinema Gear Set for
Canon RF 15-30mm F4.5-6.3 IS STM
reverse the above steps.
The tightness between the Cinema
Gear Set for Canon RF 15-30mm F4.5-
6.3 IS STM and the lens can be
adjusted by removing or adding rubber
grips on either sides of the plastic C-
ring spare rubber grips are included in
the package.

CONTROL THE GEAR
1. The Cinema Gear Set for Canon RF 15-30mm F4.5-6.3 IS STM can be
controlled by zoom/focus knobs of the housing.
After mount the camera and lens (with gear installed) on the housing
confirm that the zoom/focus knobs operates correctly.

SPECIFICATIONS
#16345 Nauticam Cinema Gear Set for Canon RF
15-30mm F4 5-6 3 IS STM
Dimensions: Zoom gear : DIA102mm × 19.0mm
Focus gear : DIA102mm × 41.0mm
Type: Zoom and focus gears
Compatible
lens:
Canon RF 15-30mm F4 5-6 3 IS
STM
Remark:
Nauticam supports only e-manuals. Please download
corresponding product manuals on google drive
https://bit.ly/Nauticammanual or contact us for e-
manuals.