Nauticam 87515 User manual

Current as of 2020-08-26
Instruction Manual for
Instruction Manual forInstruction Manual for
Instruction Manual for
M67 Mount to EMWL Focusing Unit
M67 Mount to EMWL Focusing UnitM67 Mount to EMWL Focusing Unit
M67 Mount to EMWL Focusing Unit
PN # 87515
F
FF
F
OREWORD
OREWORDOREWORD
OREWORD
Thank you for your purchase of a NAUTICAM product.
At NAUTICAM, e pride ourselves in the ability to recognize the
requirements of professional as ell as amateur under ater
photographers and fulfill them through the innovative designs of
our products. We strive to achieve a high level of user-friendliness
by allo ing stress-free installation and easy operation of all
important functions of the camera.
Please read this manual carefully before using the product, this ill
maximize its performance as ell as its lifetime.
W
WW
W
ARRANTY
ARRANTYARRANTY
ARRANTY
All NAUTICAM Products are arranted against any material and
manufacturing defects for t o years from the date of purchase for
consumer use. This arranty only applies to products purchased
from authorized NAUTICAM dealers and does not extend beyond
the original retail purchaser.
To return your product for service, please contact your regional
authorized service center(s). Please note that this arranty only
applies hen the product is purchased in the territory here the
service center is located.
NAUTICAM does not hold responsibility for damage, of any nature,
to any equipment used ith and/or placed ithin our products.
NAUTICAM accepts no liability for any loss of captured images or
the inability to capture images even if it is due to the
malfunctioning of our products.
Unauthorized modifications and/or repairs of our products ill
automatically invalidate the arranty.
*Remark: the illustrators in this manual may differ from the actual product.
1. Remove the six thumb scre s from the focusing unit as
sho n.
2. Remove the bayonet mount ring.
Note that there are three small black cylindrical locating
pins. All 3 pins should remain on the focusing unit.
3. Place M67 mount ring onto the focusing unit it seats on the
focusing unit.
I
II
I
DENTIFICATION OF
DENTIFICATION OF DENTIFICATION OF
DENTIFICATION OF
P
PP
P
ART
ARTART
ART
C
CC
C
ANGE TO
ANGE TO ANGE TO
ANGE TO
M67
M67M67
M67
MOUNT
MOUNT MOUNT
MOUNT
M
67
T
hread
Scre
H
oles (
x 6
)
Locating Pin Holes (x 3)
Spare Thumb S
cre s (x 6
)
Spare
Locating pins
(x 3
)

Current as of 2020-08-26
4. Secure the M67 mounting ring by tightening the six thumb
scre s. Do not over-tighten.
S
SS
S
PECIFICATIONS
PECIFICATIONSPECIFICATIONS
PECIFICATIONS
Dimensions (mm): 82mm x 15.25mm
Compatible ports: M67 threaded ports
Remark: Nauticam supports only e-manuals. Please do nload
corresponding product manuals on Nauticam.com ebsite, or contact us
for e-manuals.