Nauticam N100 X1855-Z User manual

INSTRUCTION MANUAL
For N100 X1855-Z Zoom Gear for
Fujifilm FU INON XF18-55F2.8-4.0
PN# 36474
Thank you for your purchase of a NAUTICAM
product.
At NAUTICAM, e pride ourselves in the ability to
recognize the requirements of professional as ell
as amateur under ater photographers and fulfill
them through the innovative designs of our
products. We strive to achieve a high level of
user-friendliness by allo ing stress-free
installation and easy operation of all important
functions of the camera.
Each product is individually inspected and ater
pressure tested to ensure optimum quality.
Please read this manual carefully before using the
product, this ill maximize its performance as ell
as its lifetime.
FORWORD
Current as of 1/16/2023

All NAUTICAM Products are arranted against
any material and manufacturing defects for t o
years from the date of purchase for consumer
use. This arranty only applies to products
purchased from authorized NAUTICAM dealers
and does not extend beyond the original retail
purchaser.
To return your product for service, please
contact your regional authorized service
center(s). Please note that this arranty only
applies hen the product is purchased in the
territory here the service center is located.
NAUTICAM does not hold responsibility for
damage, of any nature, to any equipment used
ith and/or placed ithin our products.
NAUTICAM accepts no liability for any loss of
captured images or the inability to capture
images even if it is due to the malfunctioning of
our products.
Unauthorized modifications and/or repairs of
our products ill automatically invalidate the
arranty.
WARRANTY

IDENTIFICATION OF PARTS
Spare Rubber grips
Plastic C-ring
X1855-Z Zoom Gear

MOUNT THE GEAR ON A LENS
1. Insert the plastic C-ring as sho n and
place it over the lens.
2 Insert the X1855-Z Zoom Gear on the
plastic C-ring until it reaches the
flange of the plastic C-ring.
3. To remove the X1855-Z Zoom Gear,
reverse the above steps.
The tightness bet een the X1855-Z
Zoom Gear and the lens can be
adjusted by removing or adding rubber
grips on either sides of the plastic C-
ring, spare rubber grips are included in
the package.

CONTROL THE GEAR
1. The X1855-Z Zoom Gear can be controlled by zoom/focus knob of the
housing.
After mount the camera and lens ( ith gear installed) on the housing,
confirm that the zoom/focus knob operates correctly.

SPECIFICATIONS
#36474 N100 X1855-Z Zoom Gear for Fujifilm
FU INON XF18-55F2.8-4.0
Dimensions: DIA87.0mm ×41.9mm
Type: Zoom gear
Compatible lens: Fujifilm FU INON XF18-
55F2.8-4.0
Remark:
Nauticam supports only e-manuals. Please do nload
corresponding product manuals on google drive
https://bit.ly/Nauticammanual, or contact us for e-
manuals.