Current as of 2022-5-16
36146
36146 36146
36146 36061
3606136061
36061
P1442X
P1442XP1442X
P1442X-
--
-PZ Zoom
PZ Zoom PZ Zoom
PZ Zoom
Gear for Panazonic Lumix G X
Gear for Panazonic Lumix G X Gear for Panazonic Lumix G X
Gear for Panazonic Lumix G X
Vario PZ 14
Vario PZ 14Vario PZ 14
Vario PZ 14-
--
-42mm F3.5
42mm F3.542mm F3.5
42mm F3.5-
--
-5.6 ASP .
5.6 ASP . 5.6 ASP .
5.6 ASP .
POWER O.I.S.
POWER O.I.S.POWER O.I.S.
POWER O.I.S.
Instruction Manual
OREWORD
OREWORDOREWORD
OREWORD
Thank you for your purchase of a NAUTICAM product.
At NAUTICAM, we pride ourselves in the ability to recogni e the
requirements of professional as well as amateur underwater
photographers and fulfill them through the innovative designs of our
products. We strive to achieve a high level of user-friendliness by
allowing stress-free installation and easy operation of all important
functions of the camera.
Please read this manual carefully before using the product, this will
maximi e its performance as well as its lifetime.
ARRANTY
ARRANTYARRANTY
ARRANTY
All NAUTICAM Products are warranted against any material and
manufacturing defects for two years from the date of purchase for
consumer use.
This warranty only applies to products purchased from
authori ed NAUTICAM dealers and does not extend beyond the original
retail purchaser.
To return your product for service, please contact your regional
authori ed service center(s). Please note that this warranty only applies
when the product is purchased in the territory where the service center is
located.
NAUTICAM does not hold responsibility for damage, of any nature, to any
equipment used with and/or placed within our products.
NAUTICAM accepts no liability for any loss of captured images or the
inability to capture images even if it is due to the malfunctioning of our
products.
Unauthori ed modifications and/or repairs of our products will
automatically invalidate the warranty.
DENTIFICATION OF
DENTIFICATION OF DENTIFICATION OF
DENTIFICATION OF
ARTS
ARTSARTS
ARTS
OUNTING T E
OUNTING T E OUNTING T E
OUNTING T E
EAR ON A LENS
EAR ON A LENSEAR ON A LENS
EAR ON A LENS
1. Align the base unit of the oom gear with the lens as shown. Then
lightly push the base unit towards the lens until it cannot go any further.
2. Align the oom lever on the lens with the opening of oom gear cover
as shown. Then lightly push the cover towards the lens until it cannot go
any further.
3. Align the pins on the cover with the holes in the gear ring.
gear cover
PZ Zoom gear
PZ Zoom gear
