Navien COMFORTMATE EQH-20WUS User manual

EQH-20WUS, EQH-40WUS
MODEL
Please read the user manual carefully in order to use the product as intended.
Store this manual in a place where it can easily be found.
There may be a change in appearance or dimensions of the product without
prior notice for improvement of product quality.
Installation Instructions
Quick Manual
Comfort Mate™

1. Product Contents
Boiler
Remote
Controller Mattress Cover
Storage bag for boiler &
mattress
Mattress Water Removal Kit User Manual
Statue Window
Volume/Child Lock Mode setting button
Right side heating
Dial/Select button
(Turn/Press)
Left Side Heating
Power
Error Indicator
Water Level Mute
O Timer Sleep mode
Sterilization mode
Child Lock
Operation Sign
Bluetooth
Dual Heating
2. Control Panel
1. Connect
2. Power on
3.
Filling Water
بMake sure to place hose connector down facing up‘NAVIEN’.
ةConnect each connector until you hear the ‘click’ sound.
بPlug in.
ةPress the power button [ ] on the boiler or remote controller
تVoice guidance will guide you to ll the water inside the boiler.
بPour down 500ml of water into boiler and wait until water
circulates hoses inside the mat.
ةAdd water when you hear water rell alarm. (repeat 2 to 3 times)
تScrew the cap clockwise until you hear a 'click sound' and
cover the water stopper.
üBe sure to use puried or ltered water only.
1 2
2
3. Setting & Start
click!

1. Dual Temperature setting
1. O Timer Setting
2.High Temperature Mode
بPress and hold the R/L button for
more than 2 seconds.
ةTurn the dial to set the temperature.
تPress the dial to complete
* For Twin size, skip step ب.
بOn dual mode, press‘MODE’ button
ةTurn the dial to set the o timer.
تComplete setting by pressing the
‘OK’ on the dial.
* Press ‘MODE’ button twice to return
to the general mode.
ب‘UP’ sign will be displayed after 99°F to inform the danger of burns.
ةPress and turn the dial to increase the temperature,
تHigh temperature mode is from 100°F to 110°F.
üHigh Temperature burn caution.
بPress R/L button.
ةset the temperature using‘+/-’button
تComplete setting by pressing‘OK’button.
* For Twin size, skip step ب.
بPress [ ] button.
ةPress‘+/-’button to set the o timer.
تPress‘OK’ button to complete.
(Sleep mode temperature can be set from 86°F to 99°F. From 5 hours to 10 hour)
ب Press ‘MODE’ button twice and ramp will be displayed.
ة When ‘L+R’ sign blinks, turn the dial to left or right and press ‘OK” for the side
you want to set up.
ت Set up the temperature by turning the dial and press ‘OK’ to enter timer setting.
ث Set up the sleep hours and complete it by pressing‘OK’.
* For twin size, skip step ة .
ب Press and select sleep mode.
ة Select the side by pressing R/L button then press‘OK’
ت Set up the temperature by pressing “+/-”button then press ‘OK’
ث Set up the sleep hours then press ‘OK’
* For twin size, skip step
ة .
6. Sleep Mode
4. Temperature Setting
5. O Timer

Sterilization Mode
بPress ‘MODE’ button for 3 seconds then‘no’message will be displayed.
ةTurn and adjust the dial until you see the message ‘Ye s’ then press ‘OK’.
ramp is turned on and sterilization mode is now activated.
(takes 25 minutes and remaining time is shown)
Voice Volume Control
Press ’ ‘ button
3 levels to select
7. Additional Function
1. Drainage
2. Folding
3. Storage
ثPlug two ‘Water Removal Kit’, which was included in product package,
one in the middle and the other one to any side of the mat hose.
(For single size, it has only 2 connectors so plug in 2 of ‘Water removal Kit’ to both sides.)
جUse a pump(syringe type) which was included in the ‘ Water Removal Kit’,
inject the air to the middle of connector and water will come out from the
other side of connector. (For Single size, inject the air into any side and skip step ح)
حUnplug one water removal kit from nished side and plug in other side. Repeat step ج.
Trisect the mat and fold it twice.
Repeat this step one more time.
Put boiler and other parts inside the boiler storage bag .
Put folded mat inside the mat storage bag.
1
2
بSeparate the
connector from boiler.
ةPress the water tank cover
of the boiler and invert it to
remove water inside.
تLean the boiler forward and
press the connectors to
remove any remaining water.
8. Storage
Child Lock Mode
بPress ‘ ’ button for 2 seconds to activate
ةPress for 2 seconds again to deactivate.
(Other modes are blocked when child lock is in active.)