Naxa NF-501 User manual

7
7

Caution
Precaution and Maintenance
● For indoor use only
● To avoid risk of fire or electric shock, do not expose the unit to moisture or
condensation.
● To avoid overheating, do not block the ventilation holes on the back of the Digital
Photo Frame.
● Keep the unit out of direct sunlight.
● Do not disassemble the unit. There is a risk of electric shock and there
are no user-serviceable parts inside. Diassembling the unit will void
your warranty.
Cleaning the Screen
● Treat the screen carefully. The screen of the Digital Photo Frame is made of
glass and it can be broken or scratched.
● If fingerprints or dust accumulate on the screen, we recommend using a soft,
non-abrasive cloth such as a camera lens cloth to clean the screen.
● If necessary, you may moisten the cleaning cloth with water before cleaning the
screen. Do not use liquid cleaners or aerosol cleaners.
● Unplug this product from all power sources and turn it off before cleaning.
WARNING:
Please power off the unit before inserting or removing a card or
USB device.
Failure to do so may cause damage to the card/USB and the unit.
To reduce the risk of fire or electric shock, do not expose this
appliance to rain or moisture.
1

Introduction
Thank you for purchasing a Naxa Digital Photo Frame. It is designed to view photos
from your digital camera, mobile phone, or a memory storage card quickly and easily.
Please read this User Manual carefully to learn the correct way to use your new Digital
Photo Frame.
Features
1. Photo Format Support: JPEG
2. USB interface: USB 2.0 HOST
3. Memory Card Support: SD, MMC, SDHC
4. Supports viewing pictures in thumbnail mode
5. Auto Slideshow when a Memory Card is inserted
6. Built-in Clock and calendar with slideshow window
7. Photo-display modes: slideshow, preview, rotate function.
8. Adjustable slideshow speed and over 10 kinds of slideshow transitions
9. Adjustable brightness, contrast, saturation
10. Copy files to memory and delete files from cards & memory
11. OSD languages: English, Spanish, German, and Italian
Packaging Check List:
1. 7 inch digital photo frame 1 piece
2. User manual 1 piece
3. AC/DC adapter 1 piece
4. Bracket 1 piece
2

CONTENTS
1. Product Diagram ······································································· 4
1.1 Left Side of Frame ······························································· 4
1.2 Rear of Frame ···································································· 4
2.Getting Started ·········································································· 4
3.Operating Instruction ································································· 5
3.1 Card and USB ···································································· 5
3.2 Picture Mode ······································································ 5
3.3 Copy & Delete function ························································· 6
4. File ··························································································· 6
5.Calendar ··················································································· 7
6.Setup ······················································································· 7
7.Technical Specifications ····························································· 7
8.Troubleshooting Guide ······························································· 8
3

1. Product Diagram
1.2 Left Side of Frame
1.3 Rear of Frame
2. Getting Started
2.1 Plug one end of the included AC adapter into a standard 110-240V AC electrical outlet
and the other end into the DC IN power jack found on the right side of the frame.
2.2. Remove the protective film covering the LED.
2.3. Place the unit on a flat, stable surface. Turn the unit on or off by pressing the Power
button on the unit.
1. POWER (On/Off)
2. UP
3. PLAY/PAUSE, OK
4. RIGHT
5. LEFT
6. DOWN
7. MENU (Press & hold),
EXIT (Press once)
1. SD/MMC/SDHC CARD SLOT
2. USB PORT
3. DC IN (Power)
4

3. Operating Instruction
3.1 Card and USB
Note: Make sure there are supported photo files in the Card or USB device.
3.2 Photo Mode
After turning on the frame, it will show the
startup screen, and then automatically go to the
Main Menu after 3-5 seconds. Press MENU to
access the Card Selection interface.
The frame supports SD/MMC/SDHC cards and
USB memory sticks. After inserting a card or
USB stick that contains photo files, a slideshow
will start automatically. Press MENU twice to
return to the Main Menu interface where you may
access the Photo, File, Calendar, and Setup
modes.
From the Main Menu, highlight the Photo
option and then press PLAY. The frame will
display six photos; use to choose
the photo you want to display and then press
PLAY.
Press PLAY to start slideshow pictures in the
selected slide mode.
Change the slide mode as follows: press MENU
to go to SETUP, and then choose SLIDE MODE
(single-, four-, or triple-windows).
Press  to select a mode, and then press
PLAY to confirm.
5

3.3 Copy & Delete function
Note: “Disk is full, pls press any key to continue” will appear if there is not enough
space to store the photo in the built-in memory. There is room for approximately 3 photos.
4. File
5. Calendar
Select Calendar from the main menu, then
press PLAY. Use to view the
desired date.
Select File from the main menu, then press
PLAY. You can browse all the photos stored
on the memory card or on the frame's built-in
memory.
Copy photos to built-in memory: In Photo mode,
press PLAY/PAUSE to pause, then use to
select the photo you want to copy to the built-in
memory, then press & hold MENU to view the
operation menu. Select an option (save, rotate,
or zoom) and then press PLAY to confirm.
To delete pictures from built-in memory or the
memory card in six-picture mode: use
to select the picture you want to delete, then
press & hold MENU to view the delete menu.
Select delete and then press PLAY to confirm.
6

6. Setup
7. Technical Specifications
Power Adapter:
Input: AC 100-240V 50/60HZ 350mA
Output: DC 5V/1A
Picture Format: JPEG
Memory Cards: SD, MMC, SDHC
USB connection: USB 2.0 Host
Screen Parameter:
Screen Size: 7 inch TFT
Resolution:400*240 pixels
Contrast: 300:1
Aspect Ratio:16:9
Brightness: 300 cd/m2
Response Time: 20ms
Viewing Angle: 60°(left/right/vertical), 40°(horizontal)
Working Temperature: 0℃~40℃, Humidity: 10-85
8. Troubleshooting Guide
If you have problems with your frame, please consult both this guide and the instructions
in this manual. For the latest news, alerts, and documentation, visit us on the web at
www.naxa.com. If you need further assistance, please contact Naxa Technical Support.
Select Setup from the main menu,
then press PLAY to enter the Setup menu.
Use to select the option that you want to
adjust. Press PLAY to view a sub menu if it is
available, use to adjust the option, then press
OK to confirm.
7

Please adjust the color and contrast options in the setup menu.
8
No power:
Please check whether the plug is inserted correctly.
Cannot read the CARD or USB:
Please confirm whether there are supported JPEG files on the card or
USB device. Empty devices cannot be read.
Cannot play the file:
Please confirm if the file format is compatible with the frame.
Display too bright or too dark:
Please adjust the brightness or contrast options in the setup menu.
The color is light or no color: