Naxa NX-836 User manual

NX-836
PROGRESSIVE SCAN
IMPORTANT
READ THESE INSTRUCTIONS
BEFORE USE AND RETAIN
FOR FUTURE REFERENCE.
INSTRUCTION MANUAL
PORT
USB

Safety Precautions
Important Safety Instructions
Caution
Features
Front Panel and Rear Panel Illustration
Remote Control
Introduction
2
3
5
6
7
8
TV set Connecting
Digital Audio Connecting
Connections
9
10
Advanced Features
24
Others
30
Troubleshooting
33
Specifications
11
Content
Mode and FeaturesSetup
Remote Control Operation
USB/CARD/KARAOKE score
31
Remote Control Preparation
MPEG4/MP3 Playback
1
Kodak Picture CDPlayback
32
29
28

2

3

4

5

Features
Introduction
Full compatibility with DVD, CD, MP3,MPEG4, Kodak Picture CD, CD-R and CD-RW (f inali zed)
Screen saver
S-video, composite video and component (Y, Pb, Pr) video outputs
Coaxial digital audio output
Disc formats supported by this player:
Dolby Digital
KODAK picture CD
DVD video
R
RESTRICTED
Parental Lock
9
Multi-angle
32
Subtitle choices
8
Audio choices
16:9
LB
TV Aspect Ratio modes
This product incorporates copyright protection technology that is protected by method claims of
certain U.S.patents and other intellectual property rights owned by Macrovision Corporation and other
rights owners.Use of this copyright protection technology must be authorized by Macrovision
Corporation, and is intendedfor home and other limited viewing uses only unless otherwise authorized
by Macrovision Corporation.Reverse engineering or disassembly is prohibited.
The product complies with the KODAK Picture CD format and will display KODAK Picture CDs. The "KODAK
Picture CD Compatible" logo is a trademark of Eastman Kodak Company and is used with permission.
Manufactured under license from Dolby Laboratories. "Dolby" and the double-D symbol are trademarks of
Dolby Laboratories. Confidential Unpublished Works. c 1992-1997 Dolby Laboratories, Inc. All rights reserved.
Multiple playback modes: Program, Search
6

CEN SL FL
SW SR FR
5.1 CH AUDIO OUT
YPb/Cb Pr/Cr
LRCOAXIAL S-VIDEO
VIDEO
OPTICAL
2
POWERPOWER
MICMIC VOLVOL
11 2
NX-836
USB
CARD
PORT
USB
7
1.
4.
POWER
3.
DISC TRAY
23456
2.
1. Y/Pb/Cb/Pr/Cr output jack
2. VIDEO output jack
3. 2 CH output jack(L.R)
5. S-VIDEO output jack
17
PREV
NEXT
8910
5.
MIC IN
2
3456
1
7
4.Digital signal COAXIAL output jack
7. 5.1 CH output jack
6.Digital signal OPTICAL output jack
11
L/R
MIC VOL
12 13 14 15
OPEN/CLOSE
PLAY
6.
9.
8.
7.
PAUSE
10.
STOP
SENSOR
CARD IN
11.
14.
13.
12.
USB IN
10.
SCREEN

8
Introduction
Remote Control
Remote Control
STANDBY
10+
9
654
321
0
78
ANGLE
PROG
MENU
ENTER
SETUP
REV FWD PREV NEXT
SOURCE
REPEAT STEP GOTO
SLOW VIDEO
VOL- VOL+
PLA
Y/P AUS
E
L/R
MUTEA-B
KARAOKE
OSD
TITLE
OPEN/CLOSE
AUDIO
SUBTITLE
ZOOM
STOP
PBC
N/P
NX-836
VIDEO
NUMBER KEYS
OSD
A-B REPEAT
REPEAT
ENTER
ZOOM
MUTE
VOL+/VOL-
PLAY/PAUSE
STOP
SLOW MOVE()
AUDIO
STANDBY
SUBTITLE
KARAOKE
SETUP
PROG
MENU
SOURCE
REV PREV
NEXT
OPEN/CLOSE
ANGLE
GOTO
FWD
1
2
3
4
5
6
7
8
9
10
11
12
13
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
33
L/R
STEP
PBC
14
32 N/P
TITLE

9
VIDEO
S-VIDEO
L
Pb/Cb
Y
R
Pr/Cr
COAXIAL
Audio out Digital out Video out
WHITE RED
LR
AUDIO IN
VIDEO IN
VIDEOS-VIDEO
YELLOWBLACK
Component video
(for progressive scan)
VIDEO IN
P
P
Y
br
Digital out
SL
CE FL
5.1 CH Audio out
SR
SW FR
BASS
TREBLE
ECHO
DOWN UP
VOLUME
INPUT SELECTOR
MUTE
KARAOKE
CHANNEL TEST
MODE 3STEREO
PROLOGIC
BYPASS
EXCITE
POWER
MIC
2 1 1
MICVOL
2
MIC
Amplifier

10
Connecting to an AV Amplifier with Digital Audio Input Connections
Notes
1. The DVD audio setting output need to be settled for the
SPDIF/PCM or SPDIF/RAM mode. ( Refer to P.11 )
2. After connecting Video signal to the television, you can see
the image by selecting the video input channels. If connected to
the AVI , TV need to switch to the AVI . Please refer to
the TV set connecting.
3. The Amplifier will output voice after audio receive Coaxial signal.
It requires the Amplifier to select the Coaxial input.
VIDEO
S-VIDEO
L
Pb/Cb
Y
R
Pr/Cr
COAXIAL
Audio out Digital out Video out Digital out
SL
CE FL
5.1 CH Audio out
SR
SW FR
BASS
TREBLE
ECHO
DOWN UP
VOLUME
INPUT SELECTOR
MUTE
KARAOKE
CHANNEL TEST
MODE 3STEREO
PROLOGIC
BYPASS
EXCITE
POWER
MIC
2 1 1
MICVOL
2
MIC
Amplifier
Coaxial
Coaxial cableCoaxial cable
Optical
Optical cable

11
Advanced Features
1. General Steps of setup menu
A) Press thesetup button, the main setup menuappears.
B) Press the Left and Right arrow buttons to highlight the icon of the desired
page, then press the Down or Right arrow button to activate that page. For
example, if you want to setup the video page, press Right to highlight the
video icon, the video page will be displayed on the screen.
C) Press the Down arrow button to highlight the desired option. Press Enter
or press Right to select. The choices of that option appear on the right. For
example, press the Down arrow button to highlight the BRIGHTNESS
option, the press Enter to select, the brightness choices appear on the right.
SYSTEM SETUPSYSTEM SETUP
TV SYSTEM
SCREEN SAVER
VIDEO
TV TYPE
PASSWORD
RATING
DEFAULT
VIDEO SETUPVIDEO SETUP
BRIGHTNESS
CONTRAST
HUE
SATURATION

12
2. Setup Items Introduction
2.1 SYSTEM SETUP
The system setupoptions are illustrated as below:
Advanced Features
D)Press the Arrow buttons to highlight the Exit Setup option,then press
Enter or Setup again to exit Setup Menu.
According to theColor System of the TV, you canchoose the TV System.
2.1.1 TV SYSTEM
VIDEO SETUPVIDEO SETUP
BRIGHTNESS
CONTRAST
HUE
SATURATION
SYSTEM SETUPSYSTEM SETUP
TV SYSTEM
SCREEN SAVER
VIDEO
TV TYPE
PASSWORD
RATING
DEFAULT
PAL
AUTO
NTSC

Advanced Features
Choose P-scan Y,Pb,Pr only when the player is connected to aTV with progressive scan
with Y, Pb, Pr cables.
According to the setting of the output jack of TV set, you can choose ,
YUV,P-SCAN ,S-VIDEO.
2.1.3 VIDEO
The SCREEN SAVER function isautomatically and always on; when the player is in
STOP, after few minutes in Open or No disc state, it will appear a DVDlogo moving
around the screen.
2.1.2 SCREEN SAVER
13
SYSTEM SETUPSYSTEM SETUP
TV SYSTEM
SCREEN SAVER
VIDEO
TV TYPE
PASSWORD
RATING
DEFAULT
OFF
ON
SYSTEM SETUPSYSTEM SETUP
TV SYSTEM
SCREEN SAVER
VIDEO
TV TYPE
PASSWORD
RATING
DEFAULT
S-VIDEO
YUV
P-SCAN

Advanced Features
2.1.4 TV TYPE
According to theTV type, you can choose 16:9,4:3LB or 4:3PS.
16:9 : The picture fillsthe screen of a wide screenTV.
4:3 PS :Pan and Scan, the image iscut in order to fit thewhole screen.
4:3 LB: Letterbox, two black bands will appearon the upper and lower part
of the screen.
2.1.5 PASSWORD
The password option is initialized locked, and you can not set the ratings limit
or change the password. In order to set the Ratings feature to work, the password
mode must be turned on. If you want to set the ratings limit , you will need to
enter the default password. which is 0000, then press Enter to confirm. To
change the password , you will be prompted for the old password , then be
prompted for a new one. Enter a 4-digit number ( this is you password).
Press remember your PASSWORD, as the DEFAULT setting will revert
everything.
14
SYSTEM SETUPSYSTEM SETUP
TV SYSTEM
SCREEN SAVER
VIDEO
TV TYPE
PASSWORD
RATING
DEFAULT
4:3PS
4:3LB
16:9
SYSTEM SETUPSYSTEM SETUP
TV SYSTEM
SCREEN SAVER
VIDEO
TV TYPE
PASSWORD
RATING
DEFAULT
--------

Advanced Features
2.1.6 RATING
2.1.7 DEFAULT
The DEFAULT setup options are RESTORE factory setup.
The Rating feature is a rating limit system, like movie ratings. It works with
DVD discs that have been assigned a rating. This helps you control the types
for DVDs that your family watches.
When your unit does not work properly, It may probably result from some wrong
settings. Please try the Restore Factory Setting function to see if the unit can
restore to its normal working status.
15
SYSTEM SETUPSYSTEM SETUP
TV SYSTEM
SCREEN SAVER
VIDEO
TV TYPE
PASSWORD
RATING
DEFAULT
1 KID SAFE
2 G
3 PG
4 PG13
5 PG-R
6 R
7 NC-17
8 ADULT
SYSTEM SETUPSYSTEM SETUP
TV SYSTEM
SCREEN SAVER
VIDEO
TV TYPE
PASSWORD
RATING
DEFAULT RESTORE

Advanced Features
2.2.2 AUDIOLANG
Highlight the AUDIO LANG option, and press the Arrow buttons to choose the
audio language you prefer. Press Enter to confirm. If the disc you are playing
has that language, it will display that language.
2.2 LANGUAGE SETUP
2.2.1 OSD LANGUAGE
Highlight the OSD LANGUAGE option, and press the Arrow buttons to choose
the OSD language you prefer. Press Enter to confirm, then the language will be
set as OSD language.
The language setupoptions are illustrated as below:
Highlight the SUBTITLE LANG option, and press the Arrow buttons
to choose the subtitle language you prefer. Press Enter to confirm.
If the disc you are playing has that language, it will display subtitles
in that language.
2.2.3 SUBTITLE LANG
16
LANGUAGE SETUPLANGUAGE SETUP
ENGLISH
SPANISH
FRENCH
GERMAN
OSD LANGUAGE
AUDIO LANG
SUBTITLE LANG
MENU LANG
LANGUAGE SETUPLANGUAGE SETUP
OSD LANGUAGE
AUDIO LANG
SUBTITLE LANG
MENU LANG
CHINESE
ITALIAN
FRENCH
SPANISH
PORTUGUESE
LATIN
GERMAN
ENGLISH

Advanced Features
Notes:
If your preferred language is not available, the disc s default language
will be played.
,
2.2.4 MENU LANG
Highlight the MENU LANG option, and press the Arrow buttons to
choose the menu language you prefer. Press Enter to confirm. If the
disc you are playing has that Language, it will display the menu in the
language.
17
LANGUAGE SETUPLANGUAGE SETUP
OSD LANGUAGE
AUDIO LANG
SUBTITLE LANG
MENU LANG
CHINESE
ITALIAN
FRENCH
SPANISH
PORTUGUESE
GERMAN
OFF
ENGLISH
LANGUAGE SETUPLANGUAGE SETUP
OSD LANGUAGE
AUDIO LANG
SUBTITLE LANG
MENU LANG
CHINESE
ITALIAN
FRENCH
SPANISH
PORTUGUESE
GERMAN
LATIN
ENGLISH

Advanced Features
Highlight the AUDIO OUT option, and press the Arrow buttons to
choose the audio output mode you prefer. Press Enter to confirm;
There are 3 optional audio output modes: SPDIF/OFF, SPDIF /
RAW, and SPDIF/ PCM.
SPDIF/OFF: Digital audio output off.
SPDIF/RAW: When the player is connected to an amplifier through the coaxial
cable.
SPDIF/PCM: When the player is connected to a 2 channels digital stereo amplifier.
2.3.1 AUDIO SETUP
18
AUDIO SETUPAUDIO SETUP
SPDIF/OFF
SPDIF/PCM
SPDIF/RAW
AUDIO OUT
MIC SETUP
ECHO
MIC VOL
2.3.2 MIC SETUP
Highlight the "MICSETUP" option, select MIC Auto and off via LEFT/RIGHT
direction keys andENTER key.
AUDIO SETUPAUDIO SETUP
OFF
AUTO
AUDIO OUT
MIC SETUP
ECHO
MIC VOL

Advanced Features
19
2.4.1 BRIGHTNESS
Use the Up and Down arrow buttons to move the scroll and adjust the
brightness.
VIDEO SETUPVIDEO SETUP
BRIGHTNESS
CONTRAST
HUE
SATURATION
AUDIO SETUPAUDIO SETUP
AUDIO OUT
MIC SETUP
ECHO
MIC VOL
2.3.4 MIC VOL
Highlight the "MIC VOL" option,adjust MIC Volume viaUP/DOWN direction keys .
AUDIO SETUPAUDIO SETUP
AUDIO OUT
MIC SETUP
ECHO
MIC VOL
2.3.3 ECHO
Highlight the "ECHO"option, adjust echo via UP/DOWN direction keys.