Naxa NTD-4050 User manual
MODEL NO.: NTD-4050
39.5 CLASS WIDE SCREEN FHD LED
TV WITH DVD PLAYER
FCC Notice
Support
NAXA
9 Safety Information
Warning
CAUTION!
*'J � RISQUE DE CHOC ELEC TRIOUE/NE PAS OUVRIR
Important Safety Instructions
Safety
I
--�o
Safety
x
/
x
I
U
Three HDMI input
Connecting DVD Player/Set-Top Box
One Y(CVBS)/Pb/Pr input
TV uses a TFT LED display screen
FHDTV Compatible (480i, 480p, 720p, 1080i, 1080p)
Supports American TV Standards 8VSB/Free 64/256QAM,NTSC System, ATSC System
Connect directly to computer to achieve a TV/monitor.
Zero X radiation complies with green environment protection requirement
Advanced Chroma Processing
Closed captioning/Program Control
SAP/STEREO/MONO; ATSC.
HDMI input
USB input
Input terminals used for external equipment connection
Overview of front and side panel
NTD-4050
80 W
35.9 * 8.1 * 22.5 Inch
14.3 lbs
AC 100-240V~50/60Hz
Remote control sensor / Power indicator
VOLUME +/-
Press to increase/decrease the volume.
CHANNEL +/-
Press to change channels.
SOURCE
Toggles between all the available input sources.
MENU
Press to see an on-screen menu of your TV.
Press this button when the power is on the disc will eject. Press it again the disc
is pulled in automatically.
After placed a disc in the disc tray, press this button to play the disc and press it
again to pause.
STANDBY
Press STANDBY button to toggle between normal and standby mode.
1.
2.
3.
5.
4.
7.
6.
2*8W
1920 × 1080
8.
TV reception
CO AX
OU T
Pb P r
IN
IN
L R
AC 100 -240V~
50/60Hz
1 3 4 52 6 7
10
9
8
7
11
OUT
1. STAND
BY:
Turn the TV on/off.
2. MUTE: Press to mute the sound.
3. SLEEP: Set the sleep timer.
4. FAV :Select favorite channels.
5. FAV +/-: Press to watch next / previous favorite program.
6. ADD: Add this program to the favorite channels list.
ERASE: Delete this program from the favorite channels list.
7. LOCK: Press to display the Lock menu.
8. Time: Press to display current time.
9. LIST: Press to display the TV program list.
10. FREEZE: Press tofreeze the screen.
11. EPG: Press to display the EPG menu.
12. INFO: Display channel information.
13. CC: Press to display the closed caption.
14. M
T
S: Press to select the audio channels.
15. MENU: TV system setup.
16. SOURCE: Press to change input source.
17. ARROW buttons: Use to move cursor up/down/left/right.
18. ENTER: Validation key.
19. EXIT: Press to exit menu.
20. ZOOM: Press to change the screen scale.
21.
S.MODE:
Press to cycle through the different
sound settings.
22. VOL +/-: Press to increase/decrease the sound level.
23. CH+/-: Press to scan through channels.
24. P.MODE: Press repeatedly to cycle through the available
video picture modes.
25. Number key (0-9): Press 0-9 to select a TV channel
directly when you are watching TV. The channel changes
after several secondsmultiple program channel such as 2-1,
etc.
26. -/--: Press this button to enter a program number for
multiple program channel such as 2-1, etc.
27. RETURN: Return to the previous channel viewed.
Press the third time and it repeats All. Press the
forth time and the repeat function cancel.
the Title.
below
DVD T/T 00/07CH 00:01:30002/003
CD TRK 00:01:30HDCP01/15
Antennas with 300ohm flat twins Leads
CO AX
OU T
CVBS/Y Pb Pr
IN
IN
L R
AC 100 -240V~
50/60Hz O UT
1Open the battery compartment
cover on the back side.
2Insert two AAA batteries inside the battery
compartment with their + and – ends
aligned as indicated. Do not mix old and
new batteries or different types of
batteries.
3 Close the cover.
Batteries should last for 1 year under normal use.
If you do not intend to use the remote control for a long period of time, remove
the batteries to prevent damage due to leakage.
Do not use old and new batteries together.
The batteries or battery pack shall not be exposed to excessive heat such as
direct sunlight, fire, or other heat sources.
COAX
OUT
CVBS/Y Pb Pr
IN
IN
L R
AC 1 00 -240V~
50/60Hz
COAX
OUT
CVBS/Y Pb Pr
IN
IN
L R
AC 1 00-240V~
50/60Hz
OU T
OU T
Connect a USB 2.0 memory device into USB slot of this TV for multimedia files
playback.
1. This USB slot only supports Music (MP3) and Photo (JPG) multimedia files
playback.
2. This TV is compatible with most USB devices in the market. However, we
cannot guarantee the compatibility of all USB devices, due to multiple technology
standards used.
COAX
OUT
CVBS/Y Pb Pr
IN
IN
L R
AC 100 -240V~
50/60Hz
COAX
OUT
CVBS/Y Pb Pr
IN
IN
L R
AC 1 00-240V~
50/60Hz
OU T
OU T
Up to 1920 *@60Hz
CO AX
OU T
CVBS/Y Pb Pr
IN
IN
L R
AC 1 00 - 240V~
50/6 0Hz
COAX
OUT
CVBS/Y Pb Pr
IN
IN
L R
AC 1 00 -240V~
50/6 0Hz
(Not supplied)
OUT
OUT
1080
Input Source
AV
YPbPr
HDMI 1
HDMI 2
HDMI 3
VGA
USB
DVD
TV
Highlight Auto Scan, press ENTER to search and store all available channels.
button control or STANDBY button on the LED TV.
SOUND
.
5. Advanced
This only adjustable for PC/VGA input signal.
6.
7
9.
10.
Audio Receiver : Turn on/off the audio receiver.
Device Lists : Press Enter to display available devices.
Connect : Turn on/off the audio receiver.
Root Menu : Press Enter button into the root menu.
CEC Control
Device Auto Power Off : Turn on/off the device auto power off.
TV Auto Power On : If this function is enabled, the TV will power on autimatically
after turningon an externally connected CEC device.
.
CHANNEL
7. Hotel Menu
-Press RIGHT navigation button or ENTER
button to enterit.
Hotel Mode: turn on/off Hotel Mode.
Boot Setting: set Picture Mode, Default
Volume, MaxVolume, Boot Source.
(Boot Channel &Channel Select won’t work if noTV signals.)
Hotel Lock: turn on/off Tuner Lock,Keypad Lock or Menu Lock.
Power Save: select desired Power Save time.
TV to USB:export data to USB device.
USB to TV: import data from USB device.
Reset Hotel Setting:reset above hotel setting.
• Insert a USB memory device, which contains Photo or Music files, into USB slot.
• Press SOURCE button on the remote control to switch this unit to USB (or Media) mode.
•Press LEFT/RIGHT navigational button to choose between the Photo or Music page.
•Press UP/DOWN navigational button to select and press the OK button to open the file.
Photo Playback
- Select Phototab on the USB page.
- Press UP/DOWN navigation button to select preferred folder/file and press
the ENTER button to enter a folder or play selected file.
Durning playback
-Press UP/DOWN navigation button to play previous/next photo.
-Press LEFT/RIGHT navigation button to rotate a photo counterclockwise/
clockwise.
-Press EXIT button to return to Photo menu page.
Durning Playback
-Press INFO button to display/hide the tool bar.
Music Playback
-Select the MUSIC tab on the USB page.
-Press UP/DOWN navigation button to select preferred folder/file and press the
ENTER button to enter a folder or play selected file.
-Press LEFT/RIGHT navigation button to select preferred option and
press ENTER button to confirm it.
: 4:3 PanScan
4:3 Letterbox
16:9
Then press DOWN button to enter the sub-page.
the multi-angle icon is display on
1.5 LAST MEMORY -
3. PREFERENCE
Enter another input source during DISC playback, and then back
to DVD input source again, this unit will resume playback from the point where last
playback was stopped, if LAST MEMORY is ON.
3.1 TV SYSTEM - Select desired TV system.
3.2 DEFAULT - It is used to reset to factory
settings.
STEREO
MONO L/R
MIX MONO
screen when a Multi-angle disc is playing.
D ISC LA BE L SI
DE
DVD
30
29
If you have any problem, review the solutions for each symptom listed below. The following
symptoms may have been caused by inappropriate adjustment rather than actual
malfunction of the unit. If the trouble persists, contact the Customer Care Center, see back
page for contact details.
Please check antenna connection. Station may be
experiencing problems, please tune to another station.
Please adjust the contrast and brightness settings.
Please check the power cord is plugged in and that
the power outlet works.Unplug the power cord plug it in
after 60 seconds and restart the TV.
Table of contents
Other Naxa DVD Player manuals
