NBB TM2400A User manual

NBB Controls + Components GmbH
www.nbbcontrols.com
User Manual Module TM2400A
02/23/2022 / V1.1

2
User Manual Module TM2400A
1Generally
The module TM2400A is intended to be installed in NBB Controls & Components GmbH
systems only and it is not commercially a ailable. The usage is in the industrial en ironment. The
further information, technical data, safety instructions and labeling are included in host manuals.
The label on the host contains the FCC ID and IC certification number of the module.
2FCC Notes
Part 15.19
This de ice complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) this de ice may not cause harmful interference, and
(2) this de ice must accept any interference recei ed, including interference that may cause
undesired operation.
Part 15.21 Statement
Changes or modifications made to this equipment not expressly appro ed by
NBB Controls & Components GmbH may oid the FCC authorization to operate this
equipment.
Part 15.105 Statement
This equipment has been tested and found to comply with the limits for a Class A digital de ice,
pursuant to part 15 of the FCC Rules. These limits are designed to pro ide reasonable protection
against harmful interference when the equipment is operated in a commercial en ironment. This
equipment generates, uses, and can radiate radio frequency energy and, if not installed and
used in accordance with the instruction manual, may cause harmful interference to radio
communications. Operation of this equipment in a residential area is likely to cause harmful
interference in which case the user will be required to correct the interference at his own
expense.

3
User Manual Module TM2400A
Rf exposure
This module complies with the requirements of Part 2.1093, for use at operating distances of
<20 cm
3IC Notes
The installer of this radio equipment must ensure that the antenna is located or pointed such
that it does not emit RF field in excess of Health Canada limits for the general population;
consult Safety Code 6, obtainable from Health Canada’s website www.hcsc.gc.ca/rpb.
RSS Gen Sect on 6.8
The radio transmitter IC:2634B-TM2400A has been appro ed by Inno ation, Science and
Economic De elopment Canada to operate with external antenna type ANT-2.4-CW-HW-T, with
the maximum permissible gain 3.2 dBi. Other antenna types that ha e a gain greater than the
maximum gain indicated are strictly prohibited for use with this de ice.
Le présent émetteur radio IC:2634B-TM2400A a été approu é par Inno ation, Sciences et
Dé eloppement économique Canada pour fonctionner a ec les types d'antenne énumérés
ci dessous et ayant un gain admissible maximal. Les types d'antenne non inclus dans cette liste, ‑
et dont le gain est supérieur au gain maximal indiqué pour tout type figurant sur la liste, sont
strictement interdits pour l'exploitation de l'émetteur.
RSS-GEN Sect on 8.4
This de ice contains licence-exempt transmitter(s)/recei er(s) that comply with Inno ation, Science and
Economic De elopment Canada’s licence-exempt RSS(s). Operation is subject to the following two
conditions:
(1) This de ice may not cause interference
(2) This de ice must accept any interference recei ed, including interference that may cause undesired
operation of the de ice.

4
User Manual Module TM2400A
L’émetteur/récepteur exempt de licence contenu dans le présent appareil est conforme aux CNR
d’Inno ation, Sciences et Dé eloppement économique Canada applicables aux appareils radio exempts de
licence. L’exploitation est autorisée aux deux conditions sui antes :
1) L’appareil ne doit pas produire de brouillage;
2) L’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est
susceptible d’en compromettre le fonctionnement.
Rf exposure
This module complies with the requirements of RSS-102 Issue 5, for use at operating distances
of <20 cm.