Neato Robotics XV Series User manual

MEET YOUR NEATO •
认识您的 NEATO

INTRODUCING NEATO
Congratulations on your new home robot! Neato can’t
wait to start vacuuming – so you don’t have to. This guide
introduces you to Neato’s features and gives you some
important pointers to set up and maintain your robot.
And don't forget to register your Neato at
www.neatorobotics.com to activate your Warranty
and get product updates and special oers.
Leave the vacuuming to Neato. What will you do with
your free time?
Go to page 1
NEATO 简介
恭喜您拥有一台新的家用机器人！Neato 已经迫不及待准备吸尘
打扫房间了 – 您可省事又省心。本指南将介绍 Neato 的功能并
向您提供一些重要提示，帮助您设置和维护您的机器人。
请记得在 www.neatorobotics.com 注册您的 Neato，以激活
保修，并获得产品更新和特别优惠。
放心将吸尘打扫工作交给 Neato。空闲时间将做些什么？
前往第 5 页

GETTING STARTED • English PAGE 1
123
SETTING UP YOUR NEATO See inside back cover for pictures that show the robot parts.
IMPORTANT! Remove the
protective film from Neato’s
screen and charge base. If
the films are left on, the
robot may not be able to
see your home or find its
charge base.
IMPORTANT! Open the dirt
bin and push DOWN on the
Battery ON/OFF switch.
BATTERY
ON/OFF
SWITCH
OFF
ON
Choose a wall outlet that has a
3' (1 m) clearance on both sides
and in front of the charge base.
This helps your robot find the
charge base.
Plug in the power cord and push the
charge base against the wall. Place the
rounded side of your Neato against the
metal contacts on the charge base.
Find your language using
arrows to the right of the
screen.
Press SELECT
button under the
screen to choose
a language.
4

CHARGING AND
OPTIMIZING THE BATTERY
• Before using, charge your Neato
overnight – about 12 hours.
• IMPORTANT! To get the most
from your battery, charge it and
discharge it completely two to
three times.
• Always put your Neato back on its
charge base when you are finished
cleaning.
Status Lights
SOLID GREEN
Fully charged and ready to clean.
BLINKING GREEN
Charging, battery not fully charged,
can clean.
BLINKING AMBER
Charging, can’t clean yet.
SOLID AMBER
Error, see message on screen.
CONFIGURING YOUR
NEATO
• Wake up Neato by pressing the
button. It may take a few seconds to
wake up.
• From the home screen, press the
SELECT button to get to the MENU.
Clock
• Select Set Clock and follow screens
to set the time.
Schedule
• Select Schedule.
• Choose Set or Change and follow
the screens to schedule cleaning.
GETTING STARTED • English PAGE 2

MAKING YOUR HOME
NEATO FRIENDLY
• Clear the area of small items like
toys and clothing–furniture is OK.
Tie up wires, curtains and other
low-hanging items.
• To keep your robot out of places
you don't want it to go, set down
boundary markers included in the
package. You can cut them to fit.
• IMPORTANT! Keep your robot away
from liquids and wet areas. Move or
cover pet bowls and plant trays.
• Keep your Neato inside the house.
It was not designed for outdoor
cleaning or freezing temperatures.
• Be aware that shiny surfaces and
black floors might confuse your
robot.
USING YOUR NEATO
Wake Up
• Press the button to “wake up”
your Neato.
Start Cleaning
• CLEAN House -
Press the button
to clean your house.
• CLEAN Spot –
Select Spot Clean
from MAIN menu to
clean a 4’ (1.2m) x
6’ (1.8m) square in
front of your Neato.
Pause Cleaning
• Press button.
Stop Cleaning
• Press button.
• Press the arrows to highlight Stop
Cleaning.
• Press SELECT
using button
under the
screen on the
PAUSE Menu or
RESUME Menu.
Sleep
Hold the button down for 5
seconds to put your Neato to "sleep".
GETTING STARTED • English PAGE 3

MAINTAINING YOUR NEATO
IMPORTANT! Your robot needs regular
maintenance to operate reliably.
Dirt Bin and Filters
• After each use, empty the dirt bin
and clean the filter and airways/
openings.
• Replace the filter in the dirt bin
every one to two months.
Sensors
• Use a dry cotton swab to clean the
two drop sensor windows on the
bottom of the robot.
• Clean the top of the robot and the
area around the laser top
with a damp
cotton cloth.
Brushes
• Remove the guard over the brush
by pulling up on both sides.
PULL UP ON
BOTH SIDES
SIMULTANEOUSLY
• Remove hair and dirt from the
brush and brush ends (remove the
end caps and clean them, being
careful not to lose the bearings.)
• Replace the brush and the guard
over the brush.
REGISTERING YOUR ROBOT
AND GETTING HELP
Visit www.neatorobotics.com
• Register your Neato to stay up
to date on software releases and
special oers.
• Find more helpful information,
including frequently asked
questions, and tips and tricks
for optimal operation.
WARRANTY
Visit www.neatorobotics.com
for warranty information.
GETTING STARTED • English PAGE 4

入门指南 • 简体中文 第5 页
123
设置您的 NEATO 在封底内页查看机器人部件图片。
重要信息！从Neato 屏幕和充
电基座揭下保护膜。如果保护
膜留在上面，机器人可能无法清
晰地看到您的家，或者找到充电
基座。
重要信息！打开尘盒，然后按下
电池打开/关闭开关。
电池打开 / 
    关闭开关
OFF
ON
选择一个充电基座两边及前方空隙
达3 英尺（1 米）的壁装电源插座。
这可帮助您的机器人找到充电基座。
插入电源线，将充电基座推倚在墙壁上。
将Neato 的圆形侧顶在充电基座的金属接
触点。
利用屏幕右侧的箭头寻找适合您的
语言。
按屏幕下方的
“SELECT（选择）”
按钮选择语言。
4

电池充电和优化
• 使用前，请在头天晚上将 Neato 充电
约12 个小时。
• 重要信息！为最大限度地发挥电池作
用，请在充满电后再将电量耗尽，如此
循环两到三次。
• 完成清扫后，请始终将 Neato 放回充
电基座上。
状态指示灯
常亮绿色
充满电，准备清扫。
闪烁绿色
正在充电，但未充满，可以进行清扫。
闪烁琥珀色
正在充电，不可以进行清扫。
常亮琥珀色
错误，查看屏幕上的消息。
配置您的 NEATO
• 按按钮唤醒 Neato。唤醒可能需
要几秒钟。
• 从主屏幕上，按选择按钮前往菜单。
时钟
• 选择设置闹钟，然后按照屏幕提示设置
时间。
定时预约
• 选择定时预约。
• 选择设置或更改，然后按照屏幕提示定时
预约清扫。
入门指南 • 简体中文 第6 页
滚动
后退
选择

打造适合 NEATO 工作的家庭
• 清理摆放玩具和衣物等小物件的区域–
家具也可以。捆扎丝线、窗帘和其它低
垂物件。
• 要使机器人远离您不想打扫的区域，可以
放置包装中附带的边界标记。您可手工裁
剪，以方便使用。
• 重要信息！使您的机器人远离液体和潮
湿区域。移走或盖上宠物碗和植物托盘。
• Neato 只适用于多房间内清扫。不可
将其用于户外清扫，或在冻结温度环境下
使用。
• 请注意，光滑的表面和黑色地板可能干扰
机器人运作。
使用您的 NEATO
唤醒
• 按按钮“唤醒”您的 Neato。
开始清扫
• 清扫多房间 - 按
按钮清扫多房间。
• 清扫定点 – 从主菜单中
选择定点清扫以清扫
Neato 前方 4 英尺
（1.2 米）x 6 英尺
（1.8 米）的区域。
暂停清扫
• 按按钮。
停止清扫
• 按按钮。
• 按箭头突出显示停止清扫。
• 使用暂停菜单或
恢复菜单屏幕下
方的按钮按选择。
睡眠
按住 按钮 5 秒钟，将 Neato 调到“睡
眠”模式。
入门指南 • 简体中文 第7 页

维护您的 NEATO
重要信息！为确保机器人可靠运行，需对其
进行定期维护。
尘盒和过滤器
• 每次使用后，清空尘盒，并清洁过滤器和
通风道/开口。
• 每一到两个月更换一次尘盒中的过滤器。
传感器
• 使用干棉签清洁机器人底部的两个防跌落
传感器窗口。
• 用湿棉布清洁机器人顶部和激光设备顶部
周边区域。
滚刷
• 通过向上拉两侧，拆下滚刷防护装置。
同时向上拉
两侧
• 清除滚刷和滚刷末端的毛发和灰尘（取下
端盖并清洁它们，小心不要遗失轴承。）
• 更换滚刷和滚刷防护装置。
注册您的机器人和获取帮助
访问 www.neatorobotics.com
• 注册您的 Neato，获取最新的软件版本
和特别优惠。
• 了解更多有用信息，包括常见问题以及实
现最佳运行的小窍门。
保修
访问 www.neatorobotics.com 了解保修
信息。
入门指南 • 简体中文 第8 页

ENGLISH - 1) Dirt Bin 2) RobotTop 3) Laser Top
4) Screen 5) Start Button 6) Bumper
简体中文 - 1) 尘盒 2) 机器人顶部 3) 激光设备顶部
4) 屏幕 5)开始按钮 6) 缓冲器
1
3
4
2
6
5
8
10
11
9
12
13
7
ENGLISH - 7) Brush Guard Tab 8) Brush 9) Drop Sensor
Window 10) Battery Door 11) Serial Number Label
12) Charging Contacts 13) Wheel
简体中文 - 7) 滚刷防护装置调整翼片 8) 滚刷 9) 跌落传感器窗口
10) 电池门 11) 序列号标签 12) 充电接触点 13) 轮子

neatorobotics.com | Neato Robotics, Inc., 8100 Jarvis Avenue, Suite 100, Newark, CA 94560 USA