
NEC Portable Projectors LT265 and LT245
Optical
DLP Panel 0.7” 12 degree DDR DMD
Resolution 1024 x 768 pixels native, up to UXGA(1600 x 1200) with Advanced AccuBlend
Lens Manual zoom (optical) and focus; Zoom ratio 1 to 1.2
LT245: F = 2.2 to 2.5, f = 22.1mm to 26.5mm
LT265: F= 2.1 to 2.3, f = 28.2mm to 33.6mm;
Light Output LT245: 2200/1760 standard/Eco-mode
(ANSI, typical) LT265: 2500/2000 standard/Eco-mode
Lamp 220 Watts DC, Eco-Mode 176 Watts
Lamp Life (up to) 4000 hours Eco-Mode; 2000 hours normal mode
Contrast Ratio LT245: 2000:1
LT265: 1600:1
Image Size 30 - 500 inches diagonal
Keystone Correction 3-D Reform ± 35 degrees horizontal
Projection Distance LT245: 35.4 to 751.9
(inches) LT265: 47.2 to 964.5
Projection Angle LT245: 15.6 to 16.2 (tele), 18.5 to 19.4(wide)
LT265: 12.3 to 12.7(tele ), 14.8 to 15.4(wide)
Electrical
Inputs Computer: (2) RGB (mini D-Sub 15-pin); Video: (1) S-Video (mini DIN 4-Pin), (1) RCA; Audio:
(1) mini audio, (1) L/R RCA; PC Card: PCMCIA type II
Outputs (1) monitor output (mini D-Sub 15-pin), (1) Stereo Mini Audio (variable audio output)
Video Compatibility NTSC, NTSC4.43, PAL, PAL-60, PAL-M, PAL-N, SECAM, HDTV: 1080i, 720p, 576p, 480i, 480p
Y/Cb/Cr component (with optional adapter)
Scan Rate Horizontal: 15 to 100 kHz (RGB: 24kHz or over); Vertical: 48 to 120 Hz
Video Bandwidth RGB 100MHz (-3dB)
Pixel Clock Freq less than 135MHz
Color Reproduction 16.7 million colors simultaneously, Full color
Horizontal Resolution 540 TV lines: NTSC, NTSC 4.43, PAL, Y/Cb/Cr
External Control (1) mini DIN 8-pin, RJ45
Sync Compatibility Separate Sync / Composite Sync / Sync on G
Built-in Speakers 2W monaural
Power Requirements 100-240VAC, 50/60Hz
Input Current 3.1A (100-120VAC), 1.4A (200-240VAC
Power Consumption 290W normal mode, 240W in Eco-mode LT245/LT265: 12W in normal standby
LT245GOV/LT265GOV: 12W in normal standby, 0.7W in power-saving standby
Mechanical
Installation Orientation: Floor/Front, Floor/Rear, Ceiling/Front, Ceiling/Rear
Dimensions (WxDxH) 10.2x12.4x4.8”; 260x315x123mm
Net Weight LT245: 7.1 lbs / 3.2 kg
LT265: 6.4 lbs / 2.9 kg
Environment Operational Temp. 41° to 95°F / 5° to 35°C
Humidity: 20-80% non-condensing
Storage: 14° to 122°F / -10° to 50°C
Regulations USA UL 60950 FCC Class B
Canada CSA60950 Class B
Accessories Projector, lens cap, power cord, RGB signal cable, CD-ROM containing user manual and
software, carrying case, remote control, batteries, quick start guide, product registration card,
remote mouse receiver
Product/Accessories
Order Code Description
LT245 XGA, 2200 ANSI lumen projector
LT245GOV XGA, 2200 ANSI lumen projector for GSA contract and education
LT265 XGA, 2500 ANSI lumen projector
LT265GOV XGA, 2500 ANSI lumen projector for GSA contract and education
NWL-100A Wireless LAN card
PWRCRD-PJPX Replacement power cable
RMT-PJ16 Replacement remote
IR-RCVR Replacement USB IR mouse receiver
RGBCBL-PJPX Replacement RGB cable
TRAVELPRO200 Leather rolling case with extension handle, includes compartments for laptop and projector.
Stores in airplane overhead.
ATAPRO200 Rugged shipping case for projector
LTROLLER200 Platinum, high impact plastic rolling case for projector. Stores in airplane overhead.
ADP-CV1 Component video adapter
LT65CM Ceiling mount for projector
LT60LPK Replacement lamp
LTSCREEN 50” diagonal table top screen in compact carrying case
SC200 Security cable locks projector to table or cart
PR52KIT Universal remote for NEC LT, VT, MT, GT and WT projectors
For more information, call 800.632.4636 or visit
www.necvisualsystems.com
NEC is a registered trademark of NEC Corporation.
All other trademarks are the property of their respective owners.
All specifications and programs are subject to change without notice.
©2004 NEC Solutions (America) Inc.
NEC Solutions (America), Inc.
Visual Systems Division
1250 Arlington Heights Rd., Suite 400
Itasca, IL 60143-1248
12.4”
(315mm)
10.2”
(260mm)
4.8”
(123mm)
Warranty
Warranty Registered owners receive a 2-year limited, parts and labor warranty
including InstaCare. InstaCare provides the original owner either limited 3
business day repair/return or next business day exchange. The lamp when
used under normal operating conditions is covered for 500 hours or 3
months, whichever comes first.
Warranty Options
Order Code Description
VLMPL-01 1-Year limited parts and labor extension
VLMIC-01 2nd-Year limited InstaCare®coverage
VLMIC-02 3rd-Year limited extended warranty plus 2nd and 3rd-Year limited
InstaCare coverage
VLMTC-02 For duration of the standard warranty (2 years), loaner or repair services
are available in EU countries, Japan and Australia (for US and Canadian
residents traveling abroad)
Accessories
LAMP ATAPRO200 REMOTE
LTROLLER200
(LT245)