5
• This product may only be serviced by a qualied technician
for maintenance to reduce the risk of electric shock.
• Disconnect the product from the power source and other
equipment if problems occur.
• Do not expose the product to water or moisture.
• Only handle the product with dry hands. Handling with wet
hands might cause an electric shock.
Installing the Nedis SmartLife app
1. Download the Nedis Smartlife app for Android or iOS on
your phone via Google Play or the Apple App Store.
2. Open the Nedis Smartlife app on your phone.
3. Create an account with your e-mail address and tap
Continue.
4You will receive a verication code on your e-mail address.
4. Enter the received verication code.
5. Create a password and tap Done.
6. Tap Add Home to create a SmartLife Home.
7. Set your location, choose the rooms you want to connect
with and tap Done.
Connecting the app (image B)
1Control tile
2Common functions
3Add product
4On / o button
1. Make sure WiFi is enabled on your smart phone.
2. Open the Nedis Smartlife app on your phone.
3. Register or login to your account.
4. Connect the product to a power outlet.
5. Tap + in the top right corner.
6. Select the product type you want to add from the list.
7. Conrm the blue LED is blinking quickly. If it does not blink,
hold the on/o button A1for 5 seconds and check again.
8. Enter the password of the 2,4 GHz Wi-Fi network to which
your phone is connected and tap Conrm. The Nedis
SmartLife app will now search for the lamp.
9. Rename the product after it has been found and added.
4If the regular connection method fails, the lamp can be
connected using AP mode:
1. Tap + B3.
2. Select the product type you want to add from the list.
3. Select AP Mode in the top right corner.
4. Hold the on/o button 5 seconds to reset it again and
conrm the blue LED is blinking slowly.
