
8
3. After the antenna mounting is nished, please move the
antenna to a best reception position and then x it.
4Please take reference of following 2 dierent positioning
way to x the antenna.
• Through the xing screw A to adjust the antenna position in
vertical direction (image E).
• Through the xing screw B to adjust the antenna position
left or right in horizontal direction (image F).
Installation 1: powered by DTV set-top-box
(image G)
4Please be noticed, in this installation, you need to make
sure that your set-top-box can support coaxial cable 5V DC
powering via the IEC or F connector to antenna.
1. Connect the coaxial cable with antenna and DTV
set-top-box.
2. Connect the DTV set-top-box to your TV. Please make sure
the coaxial cable powering function of your STB is ON.
(Please check the operational manual of your STB for coaxial
cable powering function).
3. Check the LED on the antenna. If the LED is not lighted on,
Please go back to step 2.
4. Adjust the antenna in the best position to get clear TV
picture, then x the antenna.
5. Organize the coaxial cable for neat, tidy and safety.
Installation 2: powered by AC/DC adapter
(image H)
1. Connect the coaxial cable with antenna and the power
insert (the side with ‘’antenna’’text mark).
2. Connect the other side of the power insert to your DTV
set-top-box.
3. Connect the DTV set-top-box to your TV.
4. Connect the power adapter DC output jack to the DC input
connector of the antenna, and then plug the AC/DC power
adapter into the AC power socket.
5. Check the LED on the antenna. If the LED is not lighted on,
Please go back to step 4.
6. Adjust the antenna in the best position to get clear TV
picture, then x the antenna.
7. Organize the coaxial cable for neat, tidy and safety.
ANOR5002BK700_MAN_COMP_print_1022.indd 8ANOR5002BK700_MAN_COMP_print_1022.indd 8 10-10-2022 08:41:3410-10-2022 08:41:34