neighbor Teak Low Chair and Ottoman User manual

Teak Low Chair
and Ottoman
Assembly Guide

Components Assembly Instructions Contact02
Low Chair Parts
1X Back Rest
Low Chair - Teak Box
1X Seat Pan
Low Chair - Teak Box
1X Back Strut
Low Chair - Teak Box
1X Right Arm
Low Chair - Teak Box
1X Left Arm
Low Chair - Teak Box
Hardware
6X 50mm Hex Bolt
Low Chair - Teak Box
4X 70mm Hex Bolt
Low Chair - Teak Box
4X Leveler
Low Chair - Teak Box
Allen Wrench
Low Chair - Teak Box
To o l s

Components Assembly Instructions Contact03
Low Ottoman Parts
1X Foot Rest
Low Ottoman - Teak Box
1X Right Leg
Low Ottoman - Teak Box
1X Left Leg
Low Ottoman - Teak Box
Hardware To o l s
1X Allen Wrench
Low Ottoman - Teak Box
4X 50mm Hex Bolt
Low Ottoman - Teak Box
4X Leveler
Low Ottoman - Teak Box

Components Assembly Instructions Contact04
Product Care
Caring for teak
Unfinished teak will gradually change color from honey gold
to a silver-gray patina. We encourage allowing the teak to
turn color naturally and cleaning it annually or bi-annually.
As for cleaning, we recommend Golden Teak Cleaner, which
is specifically designed to kill mold and mildew spores
inside teak.
Avoid prolonging mildew growth. If left in the shade for
extended periods, this can be common. If you live in a
particularly humid or rainy climate, keep a closer eye on
mildew growth and clean as needed.
Covering your furniture when not in use will greatly prolong
the lifespan of the wood.
Assembly Tips
Use caution when lifting
Two-person lift is recommended. The boxes and product are
both large and heavy.
Lay everything out before you begin
Getting familiar with all the components before assembly will
make for a faster and easier assembly process.
Assemble on a soft surface
We recommend assembling your furniture on a soft surface
such as a rug or a towel. The wood frame can scratch against
harsh textures like brick or concrete.
Loose first, then tight
Partly tighten the hex bolts while assembling. After the
modules are fully assembled, tighten the bolts firmly.
Keep in mind humidity levels can slightly affect how the
pieces fit together.

05 Components Assembly Instructions Contact Low Chair
Low Chair

06 Components Assembly Instructions Contact Low Chair
Connect base to
left arm
Place the Left Arm on a soft surface with the
armrest facing down. Gently insert the Seat
Pan into the arm’s front slots.
1
Back of Seat Pan will insert
into these two center holes.

07 Components Assembly Instructions Contact Low Chair
Connect back
to left arm
Insert the Back Rest into the slots on the
back of the Left Arm. Back Rest should be
flush to Seat Pan.
2

08 Components Assembly Instructions Contact Low Chair
Connect back
support to left arm
Gently insert the Back Strut into the slots on the
back of the Left Arm.
3

09 Components Assembly Instructions Contact Low Chair
Connect
right arm
Attach the Right Arm to Back Rest, Seat Pan, and
Back Strut. Press down firmly until arm is secure.
4

10 Components Assembly Instructions Contact Low Chair
Secure back rest
to base
Using the Allen Wrench provided, fasten
the Back Rest to the Seat Pan with two
50mm Hex Bolts.
7
2X 50mm Hex Bolt

11 Components Assembly Instructions Contact Low Chair
Secure right arm
Using the Allen Wrench provided, fasten the
Right Arm to the Back Rest, Seat Pan, and
Back Strut with two 70mm Hex Bolts and two
50mm Hex Bolts.
5
2X 70mm Hex Bolt
2X 50mm Hex Bolt

12 Components Assembly Instructions Contact Low Chair
Flip and secure
left arm
Gently flip chair so Right Arm is on soft surface.
Using the Allen Wrench provided, fasten the
Left Arm to the Back Rest, Seat Pan, and Back
Strut with two 70mm Hex Bolts and two 50mm
Hex Bolts.
6
2X 70mm Hex Bolt
2X 50mm Hex Bolt

13 Components Assembly Instructions Contact Low Chair
Attach levelers
Screw in adjustable Levelers to chair leg by
hand. Repeat on all four legs. Stand chair
upright and take a seat— you’re done!
8
4X Leveler

14 Components Assembly Instructions Contact Low Ottoman
Low
Ottoman

15 Components Assembly Instructions Contact Low Ottoman
Connect
ottoman legs
Place the Foot Rest on a soft surface with the
top facing down. Gently insert Right and Left Leg
into the slots as shown.
2

16 Components Assembly Instructions Contact Low Ottoman
Secure the
ottoman legs
Using the Allen Wrench provided, fasten the
Right Leg and Left Leg into the Foot Rest with
four 50mm Hex Bolts.
3
4X 50mm Hex Bolt

17 Components Assembly Instructions Contact Low Ottoman
Attach levelers
Screw in adjustable Levelers to ottoman leg
by hand. Repeat on all four legs.
4
4X Leveler

18 Components Assembly Instructions Contact Low Ottoman
Sit and enjoy!
Relax—your Low Chair and Ottoman are
ready for a long life outdoors.
5

Components Assembly Instructions Contact19
Have a question, comment, feedback?
We love hearing from customers.
[e-mail]
hineighbor.com
Contact