NemaVision-iPC NV-HMI-717P User manual

NV-HMI-7XX User Manual
1
NemaVision-iPC
NV-HMI-717/721 (P)
(SBC-7106A)
User Manual
Release Date _ Revision
Sep. 2014 V1.0

NV-HMI-7XX User Manual
2
Warning!_____________________________
Avertissement!________________________
Caution
Risk of explosion if the battery is replaced with an incorrect type.
Batteries should be recycled where possible. Disposal of used batteries must be in accordance
with local environmental regulations.
Precaution
Risque d'explosion si la pile usagée est remplacée par une pile de type incorrect.
Les piles usagée doivent être recyclées dans la mesure du possible. La mise au rebut des piles
usagées doit resecter les réglementations locales en vigueur en matière de protection de
l'environnement.
Risque de choc électrique - Ne pas faire fonctionner la machine avec son capot arrière enlevé. Des tensions
dangereuses sont élevées à l'intérieur.
Electric Shock Hazard –Do not operate the machine with its back cover removed. There are dangerous high
voltages inside.
Cet équipement génère, utilise et peut émettre une énergie de radiofréquence et s'il n'est pas installé et
utilisé conformément au manuel d'instructions, il peut provoquer des interférences dans les communications
radio. Il a été testé et approuvé conforme aux limites pour un dispositif de classe A et selon les règles de la
FCC, qui sont conçues pour fournir une protection raisonnable contre de telles interférences dans un
environnement commercial. Le fonctionnement de cet équipement dans une zone résidentielle est susceptible
de provoquer des interférences, dans ce cas l'utilisateur, à ses propres frais, devra faire le nécessaire pour
prendre toutes les mesures requises pour corriger le problème.
This equipment generates, uses and can radiate radio frequency energy and if not installed and used in
accordance with the instructions manual, it may cause interference to radio communications. It has been
tested and found to comply with the limits for a Class A computing device pursuant to FCC Rules, which are
designed to provide reasonable protection against such interference when operated in a commercial
environment. Operation of this equipment in a residential area is likely to cause interference in which case the
user at his own expense will be required to take whatever measures may be required to correct the
interference.

NV-HMI-7XX User Manual
3
Packing List
Accessories (as ticked) included in this package are:
□Adaptor
□Driver & manual CD disc
□Other.___________________(please specify)
Safety Precautions
Follow the messages below to prevent your systems from damage:
◆Avoid your system from static electricity on all occasions.
◆Prevent electric shock. Don‘t touch any components of this card when the card is
power-on. Always disconnect power when the system is not in use.
◆Disconnect power when you change any hardware devices. For instance, when you
connect a jumper or install any cards, a surge of power may damage the electronic
components or the whole system.
Consignes de sécurité
Suivez les messages ci-dessous pour éviter que vos systèmes contre
les dommages:
◆Éviter votre système contre l'électricité statique sur toutes les occasions.
◆Évitez les chocs électriques. Ne pas toucher les composants de cette carte lorsque la
carte est sous tension. Toujours débrancher lorsque le système n'est pas en cours
d'utilisation.
◆Couper l'alimentation électrique lorsque vous changez tous les périphériques matériels.
Par exemple, lorsque vous connectez un cavalier ou d'installer des cartes, une forte
augmentation de la puissance peut endommager les composants électroniques ou
l'ensemble du système.

NV-HMI-7XX User Manual
4
Table of Contents______________________
Warning!/Avertissement!............................…………………………….……..….2
Caution/Precaution…………..………………………………………………………………2
Packing List…………………………………………………………………………..3
Safety Precautions/Consignes de sécurité……….……………………………..3
Chapter 1 Getting Started
1.1 Specifications…………………………………...…………………………..6
1.2 Dimensions……………………………………………………………….…9
1.3 Brief Description of NV-HMI-7XX………………………………….……11
1.4 Installation of HDD (NV-HMI-717/NV-HMI-721)…………………..…13
Chapter 2 Hardware
2.1 Mainboard Introduction……………………...…………………………....15
2.2 Specifications………………………………………………………………15
2.3 Jumpers and Connectors Location……………………………………...18
2.4 Jumpers Setting and Connectors…………………………………..……19
Chapter 3 BIOS Setup
3.1 Operations after POST Screen…...…………...…………………………49
3.2 BIOS Setup Utility………………………………………………………….49
3.3 Main Settings………………………………………………………………50
3.4 Advanced Settings………………………………………………………...51
3.5 Chipset Settings…………………………………………………………...57
3.6 Boot Settings……………………………………………………………....60
3.7 Security Settings…………………………………………………………..62
3.8 Save & Exit Settings……………………………………………………....63
Chapter 4 Installation of Drivers
4.1 Intel Chipset Driver……...………………………………………………...66
4.2 Intel Graphics Media Accelerator Driver……………………………......69
4.3 Intel (R) Network Adapter………………………………………………...72
4.4 Realtek ALC662 HD Audio Driver Installation………………………..…75

NV-HMI-7XX User Manual
5
Chapter 5 Touch Screen Installation
5.1 Windows 2000/XP USB Driver Installation for PenMount 6000 Series....
……………………………………………………………………………...77
5.1.1 Installing Software (Resistive Touch)……………………………….....77
5.1.2 Installing Software (Projected Capacitive)……………………………81
5.2 Software Functions………………………………………………………..87
5.2.1 Software Functions (Resistive Touch)…………………………………87
5.2.2 Software Functions (Projected Capacitive)…………………………...97
Figures
Figure 1.1: Dimensions of NV-HMI-717……..…………………………........9
Figure 1.2: Dimensions of NV-HMI-721………………………………….....10
Figure 1.3: Front View of NV-HMI-717……………………………………...11
Figure 1.4: Rear View of NV-HMI-717………………………………….......11
Figure 1.5: Front View of NV-HMI-721…………………………………......12
Figure 1.6: Rear View of NV-HMI-721………………………………….......12
Figure 2.1: Mainboard Dimensions……………………………………….….17
Figure 2.2: Jumpers and Connectors Location-Board Top……………......18
Figure 2.3: Jumpers and Connectors Location-Board Bottom…………....18

NV-HMI-7XX User Manual
6
Chapter 1 Getting Started
1.1 Specifications
NV-HMI-717(P)
NV-HMI-721(P)
System
CPU
Onboard Intel Atom Cedar View D2550 1.86GHz Dual Core Processors
Chipset
Intel NM10 Express Chipset
Memory
Onboard 4GB DDR III 800 MHz
IO Port
USB
2 x USB 2.0 type A
Serial/Parallel
1 x RS-232 DB-9
1 x DB-9 RS-232/422/485 (Default RS-232)
Audio
1 x Audio Line Out
LAN
2 x GbE LAN RJ-45
Power
1 x 3-pin DC Power input terminal
1 x 2-pin power switch
HDMI
1 x HDMI Port
Power LED Light
1 x Power LED light (only for NV-HMI-717)
Option
2 x RS-232 DB-9 + 1 x Mini-PCIe slot via TB-528C2ME1
2 x CAN bus via TB-528CAN2
2 x USB 2.0 type A + 1 x Mini-PCIe slot + 1xRS-232 DB-9 via TB-528C1U2P1
2 x USB 2.0 type A + via TB-528U2
Storage Space
Storage
1 x 2.5" SATA HDD bay for SATA HDD (Easy Accessible)
1 x SD card slot, up to 32GB
Expansion
Expansion Slot
1 x Internal Mini-PCIe slot half size
2 x UART via internal CN3
2 x USB via internal CN3
1 x PCIe x1 via internal CN3
1 x PS/2 via internal CN3
4 x GPIO via internal CN3
1 x Internal Mini-PCIe slot half size
Display
Display Type
17 ” TFT-LCD
21.5 ” TFT-LCD
Max. Resolution
1280 x 1024
1920 x 1080
Max. Color
16.7M
16.7M
Luminance (cd/m²)
350(typ) 280(min)
250(typ) 200(min)

NV-HMI-7XX User Manual
7
Contrast Ratio
800:1
3000:1
View angle(H°/V°)
160 / 140
178 / 178
Touch Screen –Resistive Touch Window Type
TS Control IC
PenMount 6000 on Board
Interface
RS-232 interface
Light
Transmission(%)
Over 80%
Touch Screen –Projected Capacitive Type
TS Control IC
Chip on tail
Interface
USB interface
Light
Transmission(%)
Over 90%
Power
Power Input
9~36V/DC
Mechanical
Construction
RAL 9007
IP Rating
IP65 compliant front panel
Mounting
Panel Mounting VESA 100 x 100 mm
Dimension (mm)
439 x 348 x 64.8
557 x 362 x 64.8
Environmental
Operating
temperature(°C)
0~50℃
Storage
temperature(°C)
-20~60℃
Storage humidity
10 to 90% @ 40°C, non- condensing
Certification
CE / FCC Class A
Meet CE / FCC / CB / CCC
Operating System Support
OS Support
Windows 32-bit XP Pro, Windows 7 32-bit, Windows CE 6.0, Fedora 14
Note 1: NV-HMI series is covered by one or more of the following patents: US6, 570, 884,
US6,115,776, and US6,327,625.
** Please be notice.
Due to the limitation for Intel N2000/D2000 EMGD driver, therefore NV-HMI will have some limitation
under XP. 1. The Intel EMGD driver version is v1.15
2. It will have the unknown device under device management due to not support the
Intel HDA device (refer to the photo below)

NV-HMI-7XX User Manual
8
3. It will need install the correct driver by LCD panel size/resolution, totally four
version : 800*480, 800*600, 1024*768(18bit), 1024*768(24bit)
4. The original driver not support VGA display will have to customize

NV-HMI-7XX User Manual
9
1.2 Dimensions
Figure 1.1: Dimensions of NV-HMI-717

NV-HMI-7XX User Manual
10
Figure 1.2: Dimensions of NV-HMI-721

NV-HMI-7XX User Manual
11
1.3 Brief Description of NV-HMI-7XX
NV-HMI-717 and NV-HMI-721 are Industrial Compact Size Panel PC in NV-HMI series, which
comes with flat front panel touch screen and fanless design. It is powered by Intel Atom D2550
1.8GHz CPU built-in, 4GB DDR III 800 MHz. NV-HMI series is 9~36VDC wide-ranging power input
and IP65 compliant front panel. Optional projected capacitive touch screen support 7H anti-scratch
surface is ideal for use as a PC-based controller for Industrial Automation & Factory Automation.
Figure 1.3: Front View of NV-HMI-717
Figure 1.4: Rear View of NV-HMI-717

NV-HMI-7XX User Manual
12
Figure 1.5: Rear View of NV-HMI-721
Figure 1.6: Rear View of NV-HMI -721

NV-HMI-7XX User Manual
13
1.4 Installation of HDD (NV-HMI-717/NV-HMI-721)
Step 1
There are 2 screws to deal with when
enclosing or removing the chassis. Gently
remove 2 screws.
Step 2
You can put or remove HDD into the
machine by pulling the HDD bracket.
Step 3
You can remove HDD by unscrewing 4
screws in the HDD bracket.
Note: 4 screws are packed in the packing
package.

NV-HMI-7XX User Manual
14
Step 4
There is a SD hole in the side of machine.
You can replace SD card from there.

NV-HMI-7XX User Manual
15
Chapter 2 Hardware
2.1 Mainboard Introduction
SBC-7106A is a 4" industrial motherboard developed on the basis of Intel Cedarview-M/D Processors
and NM10, which provides abundant peripheral interfaces to meet the needs of different customers.
Also, it features dual GbE ports, 3-COM ports and one Mini PCIE configuration,one VGA port, one
HDMI port, one LVDS interface. To satisfy the special needs of high-end customers, CN1 and CN2
and CN3 richer extension functions. The product is widely used in various sectors of industrial control.
2.2 Specifications
Specifications
Board Size
170mm x 113mm
CPU Support
Intel Atom D2550 /1.86GHz (2cores,10W, onboard)
Intel Atom N2600 /1.60GHz (2cores,3.5W, option）
Chipset
Intel NM10 Express
Memory Support
Onboard 4GB DDRIII SDRAM (D2550)
Onboard 2GB DDRIII SDRAM (N2600,option)
Graphics
Integrated Intel GMA 3650 (D2550)
Integrated Intel GMA 3600 (N2600)
Display Mode
1 x CRT Port
1 x HDMI Port
1 x LVDS (18/24-bit dual LVDS)
Support
Resolution
Up to 1920 x 1200 for CRT
Up to 1920 x 1200 for HDMI
Up to 1920 x 1200 for LVDS (PS8625)
Dual Display
CRT+LVDS
CRT+HDMI
LVDS+HDMI
Super I/O
Winbond W83627UHG-E
BIOS
AMIBIOS
Storage
1 x SATA Connector (7P)
1 x SATA Connector (7P+15P)

NV-HMI-7XX User Manual
16
1 x SD Socket (USB to SD)
Ethernet
2 x PCIe Gbe LAN by Intel 82574L
USB
2 x USB 2.0 (type A)stack ports (USB4/USB5)
2 x USB 2.0 Pin header for CN3 (USB2/USB3)
1 x USB 2.0 Pin header for CN1 (USB0,option)
1 x USB 2.0 Pin header for CN2 (USB1)
1 x USB 2.0 for MPCIE1 (USB7)
Serial
1 x RS232/RS422/RS485 port, DB9 connector for external
COM1)
pin 9 w/5V/12V/Ring select
1 x RS232 port, DB9 connector for external (COM2)
pin 9 w/5V/12V/Ring select
1 x RS422/485 header for CN2 (COM3)
2 x UART for CN3 (COM5,COM6)
Digital I/O
8-bit digital I/O by Pin header (CN2)
4-bit digital Input
4-bit digital Output
4-bit digital I/O by Pin header (CN3)
2-bit digital Input
2-bit digital Output
Battery
Support CR2477 Li battery by 2-pin header
Audio
Support Audio via RealtekALC662 HD audio codec
Support Line-in, Line-out, MIC by 2x6-pin header
Keyboard /Mouse
1 x PS2 keyboard/mouse by 1x6 box pin header (CN3)
Expansion Bus
1 x mini-PCI-express slot
1 x PCI-express (CN3)
Touch Ctrl
1 x Touch ctrl header for TCH1 (COM4)
Power
Management
Wide Range DC9V~36V input
1 x 3-pin power input connector
Switches and
LED Indicators
1 x Power on/off switch (BT1/BT2/CN2/CN3)
1 x Reset (CN2)
1 x Power LED status (CN1)
1 x HDD LED status (CN2)
1 x Buzzer
External I/O port
2 x COM Ports (COM1/COM2)
2 x USB 2.0 Ports (stack)

NV-HMI-7XX User Manual
17
2 x RJ45 GbE LAN Ports
1 x HDMI Port
1 x Stack audio Jack (Line out)
Watchdog Timer
Software programmable 1 –255 second by Super I/O
Temperature
Operating: -20℃to 70℃
Storage: -40℃to 85℃
Humidity
5% - 95%, non-condensing, operating
Power
Consumption
12V /0.95A (Intel Atom N2600 processor with 2GB DDR3
DRAM)
EMI/EMS
Meet CE/FCC class A
TB-528CAN2
2 x CAN bus
1 x SIM Card Socket
1 x mini-PCI-express slot
(units :mm) Figure 2.1: Mainboard Dimensions

NV-HMI-7XX User Manual
18
2.3 Jumpers and Connectors Location
Figure 2.2: Jumpers and Connectors Location- Board Top
Figure 2.3: Jumpers and Connectors Location- Board Bottom

NV-HMI-7XX User Manual
19
2.4 Jumpers Setting and Connectors
1. CPU1:
(FCBGA559), onboard Intel Intel Cedarview-M/D Processors
Model
CPU
SBC-7106A-D25-4G
D2550
SBC-7106A-D25P-4G
D2550（option）
SBC-7106A-N26-2G
N2600（option）
2. H3/H4/H5/H6:
CPU1 and U53 Heat Sink Screw holes, four screw holes for intel D2550 (or N2600)
and NM10 Heat Sink assemble.
3. U5/U6/U7/U8/U9/U10/U11/U12:
Onboard DDRIII Memory
Model
Memory
SBC-7106A-D25-4G
4GB
SBC-7106A-D25P-4G
4GB（option）
SBC-7106A-N26-2G
2GB（option）
4. JP5:
(2.0mm Pitch 1x2 box Pin Header),ATX Power andAuto Power on jumper setting.
JP5
Mode
Open
ATX Power
Close
Auto Power on (option)
S-422
Mode
Pin11-12（Off）
ATX Power
Pin11-12（On）
Auto Power on (Default)
5. JP3:
(2.0mm Pitch 1x2 Pin Header) CMOS clear jumper, CMOS clear operation will
permanently reset old BIOS settings to factory defaults.
JP3
CMOS
Open
Normal (Default)
Close 1-2
Clear CMOS

NV-HMI-7XX User Manual
20
Procedures of CMOS clear:
a) Turn off the system and unplug the power cord from the power outlet.
b) To clear the CMOS settings, use the jumper cap to close pins 1 and 2 for about 3
seconds then reinstall the jumper clip back to pins open.
c) Power on the system again.
d) When entering the POST screen, press the <F1> or <DEL> key to enter CMOS Setup
Utility to load optimal defaults.
e) After the above operations, save changes and exit BIOS Setup.
Model
JP3
SBC-7106A-N26
No
SBC-7106A-D25
Yes
SBC-7106A-D25P
Yes
6. BAT1:
(1.25mm Pitch 1x2 box Pin Header) 3.0V Li battery is embedded to provide power for
CMOS.
Pin#
Signal Name
Pin1
VBAT
PIN2
Ground
7. DC_IN1:
(5.08mm Pitch 1x3 Pin Connector),DC9V~32V System power input connector.
Pin#
Power Input
Pin1
DC+9V~32V
Pin2
Ground
Pin3
FG
Model
DC_IN1
SBC-7106A-D25
180°Connector
SBC-7106A-D25P
45°Connector
SBC-7106A-N26
180°Connector
8. BT1/BT2:
Power on/off button, They are used to connect power switch button. The two pins are
disconnected under normal condition. You may short them temporarily to realize system
startup & shutdown or awaken the system from sleep state.