NemaVision-iPC NVHMI-707 User manual

NVHMI SERIES User Manual www.nemavision-ipc.com
1
NVHMI-7 SERIES User Manual
Release Date _ Revision
Apr. 2013 V1.0

NVHMI SERIES User Manual www.nemavision-ipc.com
2
Warning!___________________________________
This equipment generates, uses and can radiate radio frequency energy and if not installed and
used in accordance with the instructions manual, it may cause interference to radio communications.
It has been tested and found to comply with the limits for a Class A computing device pursuant to
FCC Rules, which are designed to provide reasonable protection against such interference when
operated in a commercial environment. Operation of this equipment in a residential area is likely
to cause interference in which case the user at his own expense will be required to take whatever
measures may be required to correct the interference.
Disclaimer
This information in this document is subject to change without notice. In no event shall
Nemavision-iPC/Aplex Technology Inc. be liable for damages of any kind, whether incidental or
consequential, arising from either the use or misuse of information in this document or in any
related materials.
Electric Shock Hazard –Do not operate the machine with its back cover removed. There are
dangerous high voltages inside.

NVHMI SERIES User Manual www.nemavision-ipc.com
3
Packing List
Accessories (as ticked) included in this package are:
AC power cable
Driver & manual CD disc
Other.___________________(please specify)
Safety Precautions
Follow the messages below to prevent your systems from damage:
Avoid your system from static electricity on all occasions.
Prevent electric shock. Don‘t touch any components of this card when the card is
power-on. Always disconnect power when the system is not in use.
Disconnect power when you change any hardware devices. For instance, when you
connect a jumper or install any cards, a surge of power may damage the electronic
components or the whole system.

NVHMI SERIES User Manual www.nemavision-ipc.com
4
Table of Contents______________________
Warning!…………………………………………………………………………….……..….2
Disclaimer………………………………………………………………….…………………2
Packing List…………………………………………………………………………………..3
Safety Precautions…………………………………………………………………………..3
Chapter 1 Getting Started
1.1 Specifications……………………………………..….……………………..6
1.2 Dimensions………………………………...………………………….......7
1.3 Brief Description………………………………………………….………10
1.4 Installation of HDD………………………………………………………11
Chapter 2 Hardware
2.1 Mainboard………………..…….……………………………………..…..15
2.2 Installations…….………………….……………………………………...18
2.3 Jumpers Setting and Connectors........................................................19
Chapter 3 BIOS Setup
3.1 Operations after POST Screen.............................................................28
3.2 BIOS SETUP UTILITY..........................................................................29
3.3 Main Settings…....................................................................................29
3.4 Advanced Settings............................................................................... 31
3.5 Chipset Settings................................................................................... 37
3.6 Boot Settings....................................................................................... 41
3.7 Security Settings.................................................................................. 44
3.8 Save and Exist Settings....................................................................... 45
3.9 Exit Options..........................................................................................51
Chapter 4 Installation of Drivers
4.1 Intel Chipset Driver.…………………………...…………………………54
4.2 Intel Graphics Media Accelerator Driver...……………………………..57
4.3 Intel (R) Network Adapter……..………………………………………….60
4.4 Realtek ALC662 HD Audio Driver Installation…….………….…………62
Chapter 5 Touch Screen Installation
5.2 Windows 2000/XP USB Driver Installation for PenMount 6000Series.64
5.1.1 Installing Software (Resistive Touch).................................................64

NVHMI SERIES User Manual www.nemavision-ipc.com
5
5.1.2 Installing Software (Projected Capacitive)..........................................69
5.2.1 Software Functions(Resistive Touch).................................................74
5.2.2 Software Functions(Projected Capacitive)………….………………….85
Figures
Figure 1.1:Dimensions of NVHMI-707…………………………………..…....7
Figure 1.2:Dimensions of NVHMI-708…………………………………..…....8
Figure 1.3:Dimensions of NVHMI-712…………………………………….8
Figure 1.3:Dimensions of NVHMI-715…………………………………….9
Figure 1.4: Front View of NVHMI SERIES………………………………...10
Figure 1.5: Rear View of NVHMI-707/NVHMI-708……………………..10
Figure 1.5: Rear View of NVHMI-712/NVHMI-715……………………..11
Figure 2.1: Mainboard Dimensions…………………………………..…….....17
Figure 2.2: Jumpers and Connectors Location_ Board Top………………...18
Figure 2.3: Jumpers and Connectors Location_ Board Bottom…………....19

NVHMI SERIES User Manual www.nemavision-ipc.com
6
Chapter 1 System
1.1 Specifications
NVHMI-707(P)
NVHMI-708(P)
NVHMI-712(P)
NVHMI-715(P)
System
CPU
Intel Atom Cedar View N2600 1.6GHz Dual Core Processors
System Chipset
Intel NM10
System Memory
Onboard DDR3 2GB 800 MHz
IO Port
USB
2 x USB 2.0 typeA, USB4/5
Serial/Parallel
1 x RS-232/422/485 DB-9, COM1, Default RS-232
1 x RS-232 DB-9, COM2
Audio
1 x Line out phone jack
LAN
2 x GbE RJ-45
Power
3 pins terminal block connector, DC Power input
Storage Space
HDD
1 x 2.5” SATA 2 half size
1 x 2.5” SATA 2
Movable device
1 x Internal SD slot
1 x Internal SD slot
Expansion
On board
expansion bus
1 x Mini-PCIe half size
Display
Display Type
7”TFT-LCD
8”TFT-LCD
12.1”TFT-LCD
15”TFT-LCD
Max. Resolution
800x480
800x600
800x600
1024x768
Max. Color
262K
16.2M
16.2M
16.2M
Luminance
(cd/m²)
350
350
330
330
View
angle(H°/V°)
140/110
140/125
160/140
170/170
Touch screen
Type
Resistive Touch / Projected Capacitive Touch (for P model)
Interface
RS-232 / USB (for P model)
Light
Transmission(%)
80% / 90% (for P model)

NVHMI SERIES User Manual www.nemavision-ipc.com
7
Power
Power Input
9~36V DC
Mechanical
Construction
Sliver aluminum front bezel and chassis
IP Rating
IP65 front panel
Mounting
Panel mounting, VESA 75 x 75
Panel mounting, VESA 100 x 100
Dimension (mm)
202 x 149 x 39
231 x 176 x 51
319 x 245 x 51.68
410 x 310 x 54.67
Net Weight (Kgs)
2.3
3.2
4.0
6.3
Environmental
Operatiing
temperature(°C)
0~50
Storage
temperature(°C)
-20~60
Storage humidity
10 to 90% @ 40°C, non- condensing
Certification
CE / FCC ClassA
Operating
System Support
Windows XP pro, Windows XP Embedded, Windows Embedded CE6.0(Note 1), Windows 7 pro for
Embedded Windows Embedded standard 7(Win 7 support 3D Graphic function)
Note 1: NVHMI series is covered by one or more of the following patents: US6, 570, 884, US6,115,776, and US6,327,625.
1.2 Dimensions
Figure 1.1: Dimensions of NVHMI-707

NVHMI SERIES User Manual www.nemavision-ipc.com
8
Figure 1.2: Dimensions of NVHMI-708
Figure 1.3: Dimensions of NVHMI-712

NVHMI SERIES User Manual www.nemavision-ipc.com
9
Figure 1.4: Dimensions of NVHMI-715

NVHMI SERIES User Manual www.nemavision-ipc.com
10
1.3 Brief Description of NVHMI SERIES
There are 7”, 8”, 12”,15”Industrial Compact Size Panel PC in NVHMI series, which comes with flat
front panel touch screen and fanless design. It is powered by an Intel Atom N2600 1.6GHz CPU
built-in, 2GB DDR III 800 MHz. NVhmi series is 9~36VDC wide-ranging power input and IP65
compliant front panel. Optional projected capacitive touchscreen support 7H anti-scratch surface is
ideal for use as a PC-based controller for Industrial Automation & Factory Automation.
Figure 1.5: Front View of NVHMI SERIES
Figure 1.6: Rear View of NVHMI -707/NVHMI -708

NVHMI SERIES User Manual www.nemavision-ipc.com
11
Figure 1.7: Rear View of NVHMI -712/ NVHMI- 715
1.4 Installation of HDD(NVHMI-707/NVHMI-708)
Step 1
There are 2 screws to deal with when
enclosing or removing the chassis. Gently
remove 2 screws.
Step 2
There is a SSD card in the bracket. Gently
remove the screw, then carefully pull SSD
card.

NVHMI SERIES User Manual www.nemavision-ipc.com
12
Step 3
Take out SSD Card bracket.
Step 4.
You can replace SSD card by unscrewing 4
screws as shown in the picture.
Note: 4 screws are packed in the packing
list.
Step 5
There is a SD card hole in the side of the
machine. You can replace SD card from
there.

NVHMI SERIES User Manual www.nemavision-ipc.com
13
Step 6.
Gently screw the screws.
Installation of HDD(NVHMI-712 / NVHMI-715)
Step 1
There are 2 screws to deal with when
enclosing or removing the chassis. Gently
remove 2 screws.

NVHMI SERIES User Manual www.nemavision-ipc.com
14
Step 2
You can put or remove HDD into the
machine by pulling the HDD bracket.
Step 3
You can remove HDD by unscrewing 4
screws in the HDD bracket.
Note: 4 screws are packed in the packing
package.
Step 4
There is a SD hole in the side of machine.
You can replace SD card from there.

NVHMI SERIES User Manual www.nemavision-ipc.com
15
Chapter 2 Hardware
2.1 Mainboard
Specifications
Board Size
170mm x 113mm
CPU Support
Intel Atom N2600 /1.60GHz
Chipset
Intel NM10 Express
Memory
Support
Onboard 2GB DDRIII SDRAM
Graphics
Integrated Intel GMA 3600 (N2600)
Display Mode
1 x CRT Port
1 x LVDS1 (18/24-bit single LVDS)
Support
Resolution
Up to 1920 x1200 for CRT
Up to 1366 x768 for LVDS1 (N2600)
Dual Display
CRT+LVDS1
Super I/O
Winbond W83627UHG-E
BIOS
AMIBIOS
Storage
1 x SATA Connector (7P)
1 x SATA Connector (7P+15P)
1 x SD Socket (USB to SD)
Ethernet
2 x PCIe GbE LAN by Realtek RTL8111E
USB
2 x USB 2.0 (type A)stack ports (USB4/USB5)
2 x USB 2.0 Pin header via CN3 (USB2/USB3)
2 x USB 2.0 Pin header via CN1 (USB0/USB1)
1 x USB 2.0 for MPCIE1 (USB7)
Mini-PCIe(USB7)
Serial
1 x RS-232/RS-422/RS-485, DB9 connector for external
(COM1)
pin 9 w/5V/12V/Ring select
1 x RS232 port, DB9 connector for external (COM2)
pin 9 w/5V/12V/Ring select
1 x RS422/485 header via CN2 (COM3)
2 x UART via CN3 (COM5,COM6)
Digital I/O
8-bit digital I/O Pin header via CN2

NVHMI SERIES User Manual www.nemavision-ipc.com
16
4-bit digital Input
4-bit digital Output
4-bit digital I/O Pin header via CN3
2-bit digital Input
2-bit digital Output
Battery
Support CR2477 Li battery by 2-pin header
Audio
Realtek ALC662 HD audio codec
Line-in, Line-out, MIC via 2x6-pin header
Audio Line out in phone jack
Keyboard
/Mouse
1 x PS2 keyboard/mouse 1x6 box pin header via CN3
Expansion Bus
1 x mini-PCI-express slot
1 x PCI-express via CN3
Touch Ctrl
1 x Touch control header for TCH1 (COM4)
Power
Management
Wide Range DC 9~36V input
1 x 3-pin power input connector
Switches and
LED Indicators
1 x Power on/off switch via CN1
1 x Reset switch via CN1
1 x Power LED status via CN1
1 x HDD LED status via CN1
1 x Buzzer
External I/O
port
2 x COM Ports (COM1/COM2)
2 x USB 2.0 Ports (USB4/USB5)
2 x GbE LAN Ports
1 x Line out Audio phone jack
Watchdog
Timer
Software programmable 1 –255 second by Super I/O
Temperature
Operating: -20 to 70
Storage: -40 to 85
Humidity
5% - 95%, non-condensing, operating
Power
Consumption
12V /0.95A (Intel Atom N2600 processor with 2GB DDR3
DRAM)
EMI/EMS
Meet CE/FCC class A

NVHMI SERIES User Manual www.nemavision-ipc.com
17
(units :mm)
Figure 2.1: Mainboard Dimensions

NVHMI SERIES User Manual www.nemavision-ipc.com
18
2.2 Installations
SBC-7106 is a 4" industrial motherboard developed on the basis of Intel Cedarview-M Processors and
NM10, which provides abundant peripheral interfaces to meet the needs of different customers. Also,
it features dual GbE ports, 3-COM ports and one Mini PCIE configuration, one VGA port, one HDMI
port, one LVDS interface. To satisfy the special needs of high-end customers, CN1 and CN2 and CN3
richer extension functions. The product is widely used in various sectors of industrial control.
2.2.1 Jumpers Setting and Connectors
Board Top
Figure 2.2: Jumpers and Connectors Location_ Board Top
Board Bottom

NVHMI SERIES User Manual www.nemavision-ipc.com
19
Figure 2.3: Jumpers and Connectors Location_ Board Bottom
2.3 Jumpers Setting and Connectors
1. JP5:
(2.0mm Pitch 1X2 box Pin Header),ATX Power and Auto Power on jumper setting.
JP5
Mode
Open
ATX Power
Close
Auto Power on
(Default)

NVHMI SERIES User Manual www.nemavision-ipc.com
20
3. BAT1 :
(1.25mm Pitch 1X2 box Pin Header) 3.0V Li battery is embedded to provide power for
CMOS.
Pin#
Signal
Name
Pin1
VBAT
PIN2
Ground
4. DC_IN1:
(5.08mm Pitch 1x3 Pin Connector),DC9V~36V System power input connector
Pin#
Power Input
Pin1
DC+9V~32V
Pin2
Ground
Pin3
FG
6. VGA1:
(CRT 2.0mm Pitch 2X6 Pin Header), Video Graphic Array Port, Provide 2x6Pin cable to
VGA Port.
Signal Name
Pin#
Pin#
Signal Name
CRT_RED
1
2
Ground
CRT_GREEN
3
4
Ground
CRT_BLUE
5
6
Ground
CRT_H_SYN
C
7
8
CRT_DDCDAT
A
CRT_V_SYNC
9
10
CRT_DDCCL
K
Ground
11
12
Ground