Neopost iMeter IM-280 Manual

© 2011 Neopost USA Inc. All rights reserved. No part of this document may be reproduced or distributed in any form or by any means.
IS / IM280 iMeter™ Postage Meter
Replacement Part Guide
Scale, Power Adapter & Power Cable, Internet Adapter & Internet Cable,
Phone Modem & Phone Cable, and Base Door
For interactive step by step instructions, visit:
www.neopostinc.com/280helpdesk (For Neopost Customers)
www.haslerinc.com/280helpdesk (For Hasler Customers)
The following steps will guide you through the removal and installation of the Scale, Power Adapter &
Power Cable, Internet Adapter & Internet Cable, Phone Modem & Phone Cable, and Base Door.
Scale Replacement
1. Disconnect the power cable from the wall outlet.
2. Remove the old scale from the base.
3. Disconnect the old scale’s cable from the port of the
IS / IM280 iMeter™.
4. Remove the new scale from the shipping package.
5. Connect the new scale’s cable to the port of the
IS / IM280 iMeter™.
6. Tuck the new scale’s cable into the component cavity.
7. Place the new scale onto the system aligning the
scale’s feet with the base’s indentations.
8. Connect the power cable to the wall outlet.
Power Adapter & Power Cable Replacement
1. Disconnect the old power cable from the wall outlet.
2. Disconnect the old power adapter from the
IS / IM280 iMeter™.
3. Remove the new power adapter and power cable
from the shipping package.
4. Connect the new power cable to the new power
adapter as shown.
5. Connect the new power adapter to the IS / IM280
iMeter™.
6. Insert the plug of the new power cable into the wall
outlet. This will turn on the IS / IM280 iMeter™.
IS / IM280 iMeter™
Postage Meter
(Back View)
Scale
IS / IM280 iMeter™
Postage Meter
(Back View)
Power
Adapter
Power Cable

© 2011 Neopost USA Inc. All rights reserved. No part of this document may be reproduced or distributed in any form or by any means.
Internet Adapter & Internet Cable Replacement
1. Disconnect the power cable from the wall outlet.
2. Disconnect the old internet cable from the internet wall
outlet or router.
3. Disconnect the USB cable on the old internet adapter
from the IS / IM280 iMeter™.
4. Remove the new internet adapter and internet cable
from the shipping package.
5. Connect the USB cable on the new internet adapter to
the USB port of the IS / IM280 iMeter™.
6. Connect one end of the internet cable to the open port
on the new internet adapter.
7. Connect the other end of the new internet cable to the
wall outlet or router.
8. Connect the power cable to the wall outlet.
Phone Modem & Phone Cable Replacement
1. Disconnect the power cable from the wall outlet.
2. Disconnect the old phone cable from the wall phone
jack.
3. Disconnect the USB cable on the old phone modem
from the IS / IM280 iMeter™.
4. Remove the new phone modem & cable from the
shipping package.
5. Connect the USB cable on the new phone modem to the
USB port of the IS / IM280 iMeter™.
6. Connect one end of the new phone cable to the new
phone modem.
7. Connect the other end of the new phone cable to the
wall phone jack.
8. Connect the power cable to the wall outlet.
Base Door Replacement
1. Disconnect the power cable from the wall outlet.
2. Using both hands, pull the door open.
3. Gently push down on the base door until it is removed
from the hinges.
4. Carefully place the new base door on the base hinges
until it clicks into position.
For questions, please call: 1-800-NEOPOST (1-800-636-7678).
A0000940/A
Internet
Adapter
Internet
Cable
Internet Wall Outlet
Router
OR
IS / IM280 iMeter™
Postage Meter
(Back View)
Phone
Modem
Phone
Cable
Wall
Phone
Jack
Base
Door
IS / IM280 iMeter™
Postage Meter
(Front View)
IS / IM280 iMeter™
Postage Meter
(Back View)