NetComm NP3016 User manual

Network systems and administrators are constantly under pressure from users to deliver greater speed, response time and
quality of service. NetComm’s range of 16 and 24 port Web Smart Gigabit Switches provide a simple solution for network
engineers to build or upgrade their network infrastructure and deliver real performance gains.
NetComm’s Web Smart Gigabit Switches provide a host of Web based management features such as, VLAN, Trunking, Port-
Mirroring, Port-Based QoS, Ports Setting for Speed/Disable, flow control and reporting tools. All ports support 10/100/
1000Mbps network speeds and are auto-sensing. Ports additionally support Full & Half duplex modes and are auto MDI/MDIX
plug-and-play.
By utilising existing low-cost Cat5 and Cat5e Ethernet wiring, NetComm’s Gigabit Ethernet Switches can easily be incorporated
into your backbone structure, ensuring your enterprise can meet the needs of future growth.
NetComm Limited ABN 85 002 490 486 2-6 Orion Road, LANE COVE, NSW, 2066
phone [phone] • fax [phone] • email [email protected]
www.netcomm.com.au
Features
>Either 16 or 24x10/100/1000Mbps Auto-negotiation Gigabit Ethernet ports
>All RJ45 ports support auto MDI/MDIX
>Full/half duplex transfer mode for 10/100Mbps port and full duplex transfer mode for Gigabit speed
>Wire speed reception and transmission
>Store-and-Forward switching and support for rate adaptation to ensure data integrity
>4 or 8K unicast addresses entities per device, self-learning, and table aging
>272 or 400KBytes packet buffer
>Back pressure flow control for half-duplex
>Supports IEEE 802.3x flow control for full-duplex mode ports
>Supports Port-based VLAN, QoS and Trunking
>Supports Port-mirroring and setting for Speed/Disable, Flow control
>Easy configuration via WEB Browser
>Easy setting via Web Management Utility
>Standard 19” Rack-mount size
WEBSMARTWEBSMART
WEBSMARTWEBSMART
WEBSMART GIGABIT SERIESGIGABIT SERIES
GIGABIT SERIESGIGABIT SERIES
GIGABIT SERIES
16 Port - NP3016
24 Port - NP3024

Specifications
Standards
>IEEE 802.3 10BASE-T
>IEEE 802.3u 100BASE-TX
>IEEE 802.3ab 1000BASE-T
>IEEE 802.3x Full Duplex Flow Control
Network Media
>Ethernet: 2-pair UTP Cat. 3,4,5, up to 100M
>Fast Ethernet: 2-pair UTP Cat. 5, up to 100M
>Gigabit Ethernet: 4-pair UTP Cat. 5plus, up to 100M
Protocol CSMA/CD
Topology Star
Number of Ports
>16 or 24 x 10/100/1000Mbps auto-MDI/MDI-X port
with RJ-45 connector
Network Data Transfer Rate
>Ethernet: 10Mbps (Half-duplex)
20Mbps (Full-duplex)
>Fast Ethernet: 100Mbps (Half-duplex)
200Mbps (Full-duplex)
>Gigabit Ethernet: 2000Mbps (Full-duplex)
Data RAM Buffers 272K or 400K Bytes
(16 or 24 Port)
Filtering Address Table 4or 8K entries per device
Diagnostic LEDs
>Per Unit: Power
>Per Port: LEDs for Link/ACT,
1000M , 100M
Power 100 - 240VAC 50/60Hz,
Internal Universal Switching
Power
Power Consumption 25 or 32watts (max.)
Dimensions > 440 (w) x 210 (d) x 44 (h) mm
Temperature Operating: 0~ 40 oC
Storage: -10 ~ 70 oC
Humidity Operating: 10% ~ 90% RH
Storage: 5% ~ 90% RH
Emission FCC Class A,CE mark Class A,
VCCI-A, C-Tick (N367)
Safety cUL (UL 60950),
CB (IEC 60950)
NetComm is Australia’s dynamic data communications and
networking solutions provider. For more information on this
and other NetComm products, please visit
www.netcomm.com.au
NetComm Limited ABN 85 002 490 486
PO Box 1200, Lane Cove NSW 2066 Australia.
Phone [phone] • Fax [phone]
www.netcomm.com.au • Email [email protected]
Trademarks and registered trademarks are the property of NetComm Limited
or their respective owners. Specifications are subject to change without
notice. Images shown may vary slightly from the product.
Your NetComm dealer:
3 Year Warranty*
1 year warranty out of the box. Extra 2 years FREE with
online registration at www.netcomm.com.au
*Conditional on registration online.
Package Contents
>NP3016 or NP3024 Gigabit Ethernet Switch
>User Guide
>Power Line Cord
>Rack mounting brackets