NetComm 3G15Wn User manual

Increase Wireless Reception
(3G15WN)

Increasing your wireless reception
If you are experiencing wireless reception drop outs or disconnections, another wireless
network or device may be broadcasting on the same wireless channel as your own network.
You can usually resolve this by changing the wireless channel in use on your network.
This guide will take you through the steps required to change the wireless channel in use.
1. Open your web browser and go to the address http://192.168.1.1, using admin as the
username and password.
2. Hover your mouse over “Wireless” from the menu at the top of the page.
3. Select “Configuration” from the menu that appears underneath this.
4. Select a channel at the opposite end of the scale from the one you are currently using.
This will mean you avoid any interference you are experiencing on your currently
selected channel
5. Once you have selected your new channel to use (for example: 11), click the
“Apply/Save” button at the bottom of the page.
If you are still experiencing wireless reception issues, there may be infrastructure (walls,
floors, wiring, etc) impeding your wireless signal. Please try moving the wireless device to a
position close to your modem / router and try connecting again.