NETGEAR WG511T User manual

Version v1.0
August 2003
NETGEAR, Inc.
4500 Great America Parkway
Santa Clara, CA 95054 USA
User Manual for the
NETGEAR 108 Mbps
Wireless PC Card 32-bit
CardBus WG511T

ii
Technical Support
Please refer to the support information card that shipped with your product. By registering your
product at www.netgear.com/register, we can provide you with faster expert technical support and
timely notices of product and software upgrades.
NETGEAR, INC. Support Information
Phone: 1-888-NETGEAR, for US & Canada only. For other countries, see your Support
information card.
E-mail: [e-mail]
Web site: www.netgear.com
Statement of Conditions
In the interest of improving internal design, operational function, and/or reliability, NETGEAR reserves the right to
make changes to the products described in this document without notice.
NETGEAR does not assume any liability that may occur due to the use or application of the product(s) or circuit
layout(s) described herein.
©2003 NETGEAR, Inc. NETGEAR, the NETGEAR logo, The Gear Guy and Everybody's Connecting are
trademarks or registered trademarks of NETGEAR, Inc. in the United States and/or other countries.
Microsoft and Windows are registered trademarks of Microsoft Corporation in the United States and/or
other countries. Other brand and product names are trademarks or registered trademarks of their respective
holders. Information is subject to change without notice. All rights reserved.
August 2003
Certificate of the Manufacturer/Importer
It is hereby certified that the Model WG511T Wireless PC Card has been suppressed in accordance with the conditions
set out in the BMPT- AmtsblVfg 243/1991 and Vfg 46/1992. The operation of some equipment (for example, test
transmitters) in accordance with the regulations may, however, be subject to certain restrictions. Please refer to the notes
in the operating instructions.
Federal Office for Telecommunications Approvals has been notified of the placing of this equipment on the market and
has been granted the right to test the series for compliance with the regulations.
VCCI Statement
This equipment is in the Class B category (information equipment to be used in a residential area or an adjacent area
thereto) and conforms to the standards set by the Voluntary Control Council for Interference by Data Processing

iii
Equipment and Electronic Office Machines aimed at preventing radio interference in such residential areas. When used
near a radio or TV receiver, it may become the cause of radio interference. Read instructions for correct handling.
FCC Information to User
This product does not contain any user serviceable components and is to be used with approved antennas
only. Any product changes or modifications will invalidate all applicable regulatory certifications and
approvals
FCC Guidelines for Human Exposure
In order to comply with RF exposure limits established in the ANSI C95.1 standards, the user is advised to maintain a
distance of at least 1 inch (2.5 cm) from the antenna of this device while it is in use.
Declaration Of Conformity
We NETGEAR, Inc., 4500 Great America Parkway, Santa Clara, CA 95054, declare under our sole responsibility that
the model WG511T Cardbus Card Wireless Adapter complies with Part 15 of FCC Rules. Operation is subject to the
following two conditions:
• This device may not cause harmful interference, and
• This device must accept any interference received, including interference that may cause undesired operation.
Regulatory Compliance Information
This section includes user requirements for operating this product in accordance with National laws for usage of radio
spectrum and operation of radio devices. Failure of the end-user to comply with the applicable requirements may result
in unlawful operation and adverse action against the end-user by the applicable National regulatory authority.
NOTE: This product's firmware limits operation to only the channels allowed in a particular Region or Country.
Therefore, all options described in this user's guide may not be available in your version of the product.
FCC Requirements for Operation in the United States
Radio Frequency Interference Warnings & Instructions
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of
the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential
installation. This equipment uses and can radiate radio frequency energy and, if not installed and used in accordance
with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following methods:
• Reorient or relocate the receiving antenna
• Increase the separation between the equipment and the receiver
• Connect the equipment into an electrical outlet on a circuit different from that which the radio receiver is connected
• Consult the dealer or an experienced radio/TV technician for help.

iv
Modifications made to the product, unless expressly approved byNETGEAR, Inc., could void the user's right to operate
the equipment.
Export Restrictions
This product or software contains encryption code which may not be exported or transferred from the US or
Canada without an approved US Department of Commerce export license.
Europe - EU Declaration of Conformity
Marking by the above symbol indicates compliance with the Essential Requirements of the R&TTE Directive of the
European Union (1999/5/EC). This equipment meets the following conformance standards:
EN300 328, EN301 489-17, EN60950
Requirements For Operation in the European Community
Countries of Operation and Conditions of Use in the European Community
The user should run the client utility program provided with this product to check the current channel of operation and
confirm that the device is operating in conformance with the spectrum usage rules for European Community countries as
described in this section.
This device is intended to be operated in all countries of the European Community.
Operation Using 2.4 GHz Channels in France
The following radio channel usage limitations apply in France.
The radio spectrum regulator in France, Autorité de regulation des telecommunications (ART), enforces the following
rules with respect to use of 2.4GHz spectrum in various locations in France. Please check ART's web site for latest
This device is a 2.4 GHz low power RF device
intended for home and office use in EU and EFTA
member states. In some EU / EFTA member states
some restrictions may apply. Please contact local
spectrum management authorities for further details
before putting this device into operation.
NETGEAR 108 Mbps Wireless PC Card WG511T
FOR HOME OR OFFICE USE
Tested to Comply
with FCC Standards
FCC ID: PY3WG511V3

v
requirements for use of the 2.4GHz band in France: http://www.art-telecom.fr/eng/index.htm. When operating in the
following metropolitan regions (départements) in France, this device may be operated under the following conditions:
Indoors using any channel in the 2.4-2.4835 GHz band (Channels 1-13)
Outdoors using channels in the 2.4-2.454 GHz band (Channels 1-7)
When operating outside of the following regions (départements) in France (see table below), this product must be
operated under the following conditions:
• Indoors using channels in the 2.4465-2.4835 GHz band (Channels 10-13).
• Outdoor operation not permitted.
Please refer to the ART web site for further details.
Metropolitan Regions with Eased Restrictions in 2.4GHz Band

vi
Declaration of Conformity in Languages of the European Community
Finnish: Valmistaja NETGEAR, Inc. vakuuttaa täten että Radio LAN device tyyppinen laite on direktiivin 1999/5/EY
oleellisten vaatimusten ja sitä koskevien direktiivin muiden ehtojen mukainen.
Dutch: Hierbij verklaart NETGEAR, Inc. dat het toestel Radio LAN device in overeenstemming is met de essentiële
eisen en de andere relevante bepalingen van richtlijn 1999/5/EG.
French: Par la présente NETGEAR, Inc. déclare que l'appareil Radio LAN device est conforme aux exigences
essentielles et aux autres dispositions pertinentes de la directive 1999/5/CE.
Swedish: Härmed intygar NETGEAR, Inc. att denna Radio LAN device står I överensstämmelse med de väsentliga
egenskapskrav och övriga relevanta bestämmelser som framgår av direktiv 1999/5/EG.
Danish: Undertegnede NETGEAR, Inc. erklærer herved, at følgende udstyr Radio LAN device overholder de væsentlige
krav og øvrige relevante krav i direktiv 1999/5/EF.
German: Hiermit erklärt NETGEAR, Inc., dass sich dieser/diese/dieses Radio LAN device in Übereinstimmung mit den
grundlegenden Anforderungen und den anderen relevanten Vorschriften der Richtlinie 1999/5/EG befindet.
Italian: Con la presente NETGEAR, Inc. dichiara che questo Radio LAN device è conforme ai requisiti essenziali ed alle
altre disposizioni pertinenti stabilite dalla direttiva 1999/5/CE.
Spanish: Por medio de la presente NETGEAR, Inc. declara que el Radio LAN device cumple con los requisitos
esenciales y cualesquiera otras disposiciones aplicables o exigibles de la Directiva 1999/5/CE.
Portugese: NETGEAR, Inc. declara que este Radio LAN device está conforme com os requisitos essenciais e outras
disposições da Directiva 1999/5/CE.
Canadian Department of Communications Radio Interference
Regulations
This digital apparatus (NETGEAR 108 Mbps Wireless PC Card 32-bit CardBus WG511T ) does not exceed the Class B
limits for radio-noise emissions from digital apparatus as set out in the Radio Interference Regulations of the Canadian
Department of Communications.
Canada ID: 4054A-WG511V3

Contents vii
Contents
Chapter 1
About This Manual
Audience .........................................................................................................................1-1
Scope .............................................................................................................................1-1
Typographical Conventions ............................................................................................1-2
Special Message Formats ..............................................................................................1-2
How to Use the HTML Version of this Manual ................................................................1-3
How to Print this Manual .................................................................................................1-4
Chapter 2
Introduction
About the NETGEAR 108 Mbps Wireless PC Card 32-bit CardBus WG511T ................2-1
Key Features and Related NETGEAR Products ............................................................2-1
What’s in the Box? ..........................................................................................................2-2
A Road Map for ‘How to Get There From Here’ .............................................................2-3
Chapter 3
Basic Setup
What You Need Before You Begin ..................................................................................3-1
Verifying System Requirements ...............................................................................3-1
Observing Location and Range Guidelines ..............................................................3-2
Two Basic Operating Modes ...........................................................................................3-2
WG511T Default Wireless Configuration Settings ..........................................................3-3
Basic Installation Instructions .........................................................................................3-4
For Windows XP Users Installing a WG511T ...........................................................3-4
For Windows 2000 & 98/Me Users Installing a WG511T .........................................3-8
WG511T Wireless Connection Indicators .....................................................................3-12
Interpreting the LED on the WG511T .....................................................................3-12
Interpreting System Tray Icon Colors .....................................................................3-13
Troubleshooting ............................................................................................................3-14
Basic Tips ...............................................................................................................3-14
Troubleshooting Frequently Asked Questions .......................................................3-15

viii Contents
Chapter 4
Configuration
Understanding the Configuration Options ......................................................................4-1
Using Configuration Profiles ...........................................................................................4-1
Connecting to an Access Point in Infrastructure Mode ............................................4-2
How to Configure an Infrastructure Mode Profile .....................................................4-3
Connecting to Another PC in Ad-hoc Mode ....................................................................4-5
How to Configure an Ad-hoc Mode Profile ...............................................................4-5
How to Start a Computer-to-Computer (Ad-Hoc) Network .......................................4-8
Enabling Wireless Security Features ..............................................................................4-9
Identifying the Wireless Network Name (SSID) and WEP Security Settings ...........4-9
How to Configure WEP Encryption Security ..........................................................4-10
Statistics Page ........................................................................................................4-12
Advanced Settings Page ........................................................................................4-13
Appendix A
Technical Specifications
Appendix B
Wireless Networking Basics
Wireless Networking Overview ...................................................................................... B-1
Infrastructure Mode ................................................................................................. B-1
Ad Hoc Mode (Peer-to-Peer Workgroup) ................................................................ B-2
Network Name: Extended Service Set Identification (ESSID) ................................ B-2
Authentication and WEP ................................................................................................ B-2
802.11 Authentication .............................................................................................. B-3
Open System Authentication ................................................................................... B-3
Shared Key Authentication ...................................................................................... B-4
Overview of WEP Parameters ................................................................................ B-5
Key Size .................................................................................................................. B-6
WEP Configuration Options .................................................................................... B-6
Wireless Channels ......................................................................................................... B-7
Appendix C
Preparing Your PCs for Network Access
Preparing Your Computers for TCP/IP Networking ....................................................... C-1
Configuring Windows 98 and Me for TCP/IP Networking .............................................. C-1
Install or Verify Windows Networking Components ................................................. C-1
Enabling DHCP to Automatically Configure TCP/IP Settings in Windows 98 and Me C-3

Contents ix
Selecting Windows’ Internet Access Method .......................................................... C-5
Verifying TCP/IP Properties .................................................................................... C-5
Configuring Windows 2000 or XP for TCP/IP Networking ............................................. C-6
Install or Verify Windows Networking Components ................................................. C-6
DHCP Configuration of TCP/IP in Windows XP or 2000 ......................................... C-7
DHCP Configuration of TCP/IP in Windows XP ..................................................... C-7
DHCP Configuration of TCP/IP in Windows 2000 .................................................. C-9
Verifying TCP/IP Properties for Windows XP or 2000 ........................................... C-11
Glossary
List of Glossary Terms ................................................................................................... D-1
Index

xContents

User Manual for the NETGEAR 108 Mbps Wireless PC Card 32-bit CardBus WG511T
About This Manual 1-1
Chapter 1
About This Manual
Congratulations on your purchase of the NETGEAR 108 Mbps Wireless PC Card 32-bit CardBus
WG511T . The WG511T provides connection for multiple personal computers to the Internet
through an external broadband access device (such as a cable modem or DSL modem).
Audience
This reference manual assumes that the reader has basic to intermediate computer and Internet
skills. However, basic computer network, Internet, and firewall technologies tutorial information is
provided in the Appendices, on the NETGEAR 108 Mbps Wireless PC Card WG511T Resource CD
(SW-10036-01), and on the Netgear website.
Scope
This manual is written for the WG511T Wireless PC Card according to these specifications.:
Table 1-1. Manual Specifications
Product Version NETGEAR 108 Mbps Wireless PC Card 32-bit CardBus WG511T
Manual Part Number
Manual Publication Date August 2003
Note: Product updates are available on the NETGEAR web site at
www.netgear.com/support/main.asp. Documentation updates are available on the
NETGEAR, Inc. web site at www.netgear.com/docs.

User Manual for the NETGEAR 108 Mbps Wireless PC Card 32-bit CardBus WG511T
1-2 About This Manual
Typographical Conventions
This guide uses the following typographical conventions:
Special Message Formats
This guide uses the following formats to highlight special messages:
Table 1. Typographical conventions
italics Emphasis.
bold times roman User input.
[Enter] Named keys in text are shown enclosed in square brackets. The notation [Enter]
is used for the Enter key and the Return key.
SMALL CAPS DOS file and directory names.
Note: This format is used to highlight information of importance or special interest.

User Manual for the NETGEAR 108 Mbps Wireless PC Card 32-bit CardBus WG511T
About This Manual 1-3
How to Use the HTML Version of this Manual
The HTML version of this manual includes these features.
Figure Preface -2: HTML version of this manual
1. Left pane. Use the left pane to view the Contents, Index, Search, and Favorites tabs.
To view the HTML version of the manual, you must have a version 4 or later browser with
Java or JavaScript enabled. To use the Favorites feature, your browser must be set to accept
cookies. You can record a list of favorite pages in the manual for easy later retrieval.
2. Toolbar buttons. Use the toolbar buttons across the top to navigate, print pages, and more.
–TheShow in Contents button locates the currently displayed topic in the Contents tab.
–Previous/Next buttons display the topic that precedes or follows the current topic.
–ThePDF button links to a PDF version of the full manual.
–TheE-mail button enables you to send feedback by e-mail to Netgear support.
–ThePrint button prints the currently displayed topic. Using this button when a
step-by-step procedure is displayed will send the entire procedure to your printer--you do
not have to worry about specifying the correct range of pages.
–TheBookmark button bookmarks the currently displayed page in your browser.
3. Right pane. Use the right pane to view the contents of the manual. Also, each page of the
manual includes a “PDF of This Chapter” link at the top right which links to a PDF file
containing just the currently selected chapter of the manual.
12
3

User Manual for the NETGEAR 108 Mbps Wireless PC Card 32-bit CardBus WG511T
1-4 About This Manual
How to Print this Manual
To print this manual you man choose one of the following several options, according to your
needs.
•A “How To ... ” Sequence of Steps in the HTML View. Use the Print button on the upper
right of the toolbar to print the currently displayed topic. Using this button when a step-by-step
procedure is displayed will send the entire procedure to your printer--you do not have to worry
about specifying the correct range of pages.
•A Chapter. Use the “PDF of This Chapter” link at the top right of any page.
– Click “PDF of This Chapter” link at the top right of any page in the chapter you want to
print. A new browser window opens showing the PDF version of the chapter you were
viewing.
– Click the print icon in the upper left of the window.
–Tip: If your printer supports printing two pages on a single sheet of paper, you can save
paper an printer ink by selecting this feature.
•The Full Manual. Use the PDF button in the toolbar at the top right of the browser window.
– Click PDF button. A new browser window opens showing the PDF version of the chapter
you were viewing.
– Click the print icon in the upper left of the window.
–Tip: If your printer supports printing two pages on a single sheet of paper, you can save
paper an printer ink by selecting this feature.

User Manual for the NETGEAR 108 Mbps Wireless PC Card 32-bit CardBus WG511T
Introduction 2-1
Chapter 2
Introduction
This chapter introduces the features, package contents, and appearance of the NETGEAR 108
Mbps Wireless PC Card 32-bit CardBus WG511T.
About the NETGEAR 108 Mbps Wireless PC Card 32-bit
CardBus WG511T
The NETGEAR 108 Mbps Wireless PC Card 32-bit CardBus WG511T gives you ultimate
mobility in your office or while you are traveling. It frees you from traditional Ethernet wiring and
helps you create a wireless network for sharing your broadband cable or DSL Internet access
among multiple PCs in and around your home. It is designed for notebook computers running
Microsoft®Windows®. It is both 16-bit PCMCIA and 32-bit CardBus compatible and works in any
available PCMCIA or CardBus slot.
Its auto-sensing capability allows high packet transfer at up to 108 Mbps for maximum throughput
or dynamic range shifting to lower speeds due to distance or operating limitations in an
environment with a lot of electromagnetic interference.
The WG511T Wireless PC Card provides reliable, standards-based 802.11b 11 Mbps WLAN
connectivity that is protected with industry-standard security. In addition, it offers the faster speeds
of the soon-to-be ratified 802.11g standard. It works with Windows 98, Me, 2000, and XP
operating systems.
Key Features and Related NETGEAR Products
The WG511T Wireless PC Card provides the following features:
• Reliable IEEE 802.11g and b standards-based wireless technology.
• Supports roaming between access points when configured in Infrastructure mode.
• 108 Mbps high speed data transfer. Wireless nodes negotiate to operate in the optimal data
transfer rate. In a noisy environment or when the distance between the wireless nodes is far,
the wireless nodes automatically fall back to operate at lower transfer rates.

User Manual for the NETGEAR 108 Mbps Wireless PC Card 32-bit CardBus WG511T
2-2 Introduction
• High level of data encryption using128-bit Shared Key WEP data encryption method. A lower
level of data encryption or no data encryption is available to simplify your network setup or to
improve data transfer rate.
The following NETGEAR products can be configured to communicate with the WG511T Wireless
PC Card:
• WGT624 108 Mbps Wireless Firewall Router
• WG602 54 Mbps Wireless Access Point
• WGR614 Wireless Cable/DSL Router
• WAB102 Dual Band Access Point
• WAB501 Dual Band PC Card
• MA101 802.11b Wireless USB Adapter
• ME102 802.11b Wireless Access Point
• MA311 802.11b Wireless PCI Adapter
• MR314 and MR814 802.11b Wireless Cable/DSL Routers
• MA701 802.11b Wireless Compact Flash Card
What’s in the Box?
The product package should contain the following items:
• NETGEAR 108 Mbps Wireless PC Card 32-bit CardBus WG511T
• Installation Guide for the NETGEAR 108 Mbps Wireless PC Card 32-bit CardBus WG511T
(M-10174-01)
•NETGEAR 108 Mbps Wireless PC Card WG511T Resource CD (SW-10036-01), including:
— Driver and Configuration Utility Software
— User Manual for the NETGEAR 108 Mbps Wireless PC Card 32-bit CardBus WG511T
— Animated Network Properties Configuration Tutorial
— PC Networking Tutorial
• Warranty card
• Support information card
If any of the parts are incorrect, missing, or damaged, contact your NETGEAR dealer. Keep the
carton, including the original packing materials, in case you need to return the product for repair.

User Manual for the NETGEAR 108 Mbps Wireless PC Card 32-bit CardBus WG511T
Introduction 2-3
The NETGEAR 108 Mbps Wireless PC Card 32-bit CardBus WG511T has two interfaces:
• The PCMCIA Type II connector connects to any notebook PC with an available PCMCIA or
CardBus slot.
• The wireless interface of the NETGEAR 108 Mbps Wireless PC Card 32-bit CardBus
WG511T remains outside of the notebook PC chassis when the wireless PC card is inserted
into a notebook. The LED indicates the wireless link condition and signal quality of the
NETGEAR 108 Mbps Wireless PC Card 32-bit CardBus WG511T with another wireless node
or the associated access point.
A Road Map for ‘How to Get There From Here’
The introduction and adoption of any new technology can be a difficult process. Wireless
technology has removed one of the barriers to networking—running wires. It allows more people
to try networking while at the same time exposes them to the inherent complexity of networking.
General networking concepts, setup, and maintenance can be difficult to understand. In addition,
wireless technology adds issues, such as range, interference, signal quality, and security to the
picture.
To help overcome potential barriers to successfully using wireless networks, the table below
identifies how to accomplish such things as connecting to a wireless network, assuring appropriate
security measures are taken, browsing the Internet through your wireless connection, exchanging
files with other computers and using printers in the combined wireless and wired network.

User Manual for the NETGEAR 108 Mbps Wireless PC Card 32-bit CardBus WG511T
2-4 Introduction
Table 2-1. A Road Map for How to Get There From Here ...
If I Want To ... ? What Do I Do? What’s Needed? How Do I?
Connect to a
wireless
network
1. Identify the
wireless
network name
(SSID) and, if
used, the
wireless
security
settings.
2. Set up the
NETGEAR
108 Mbps
Wireless PC
Card 32-bit
CardBus
WG511T with
the settings
from step 1.
1. A wireless network
2. A notebook PC within the
operating range of the wireless
network. For guidelines about
the range of wireless networks,
see “Observing Location and
Range Guidelines” on
page 3-2.
To set up the WG511T, see
Chapter 3, “Basic Setup” and
follow the instructions provided.
To learn about wireless
networking technology, see
Appendix B, “Wireless
Networking Basics” for a
general introduction.
Protect my
wireless
connection from
snooping,
hacking, or
information
theft.
1. Assure that the
wireless
network has
security
features
enabled.
2. Configure my
WG511T with
the security
settings of the
wireless
network.
3. Use Windows
security
features.
1. A wireless network with
authentication and WEP
encryption enabled.
2. Wireless networking
equipment that supports WEP
encryption, such as the
WG511T and all NETGEAR
wireless networking products.
To learn about wireless
networking security, see
“Authentication and WEP” on
page B-2.
To use WEP security features,
see “Enabling Wireless Security
Features” on page 4-9 and
configure your WG511T
accordingly.
Note: Secure Internet sites such as banks and online merchants use encryption security built into browsers
like Internet Explorer and Netscape. Any wireless networking security features you might implement are in
addition to those already in place on secure Internet sites.

User Manual for the NETGEAR 108 Mbps Wireless PC Card 32-bit CardBus WG511T
Introduction 2-5
Connect to the
Internet over my
wireless
network.
1. Activate my
wireless link
and verify my
network
connection.
2. Open an
Internet
browser such
as Internet
Explorer or
Netscape
Navigator.
1. An active Internet connection
like those from cable or DSL
service providers.
2. A wireless network connected
to the cable or DSL Internet
service through a cable/DSL
router as illustrated in
“Connecting to an Access
Point in Infrastructure Mode”
on page 4-2.
3. TCP/IP Internet networking
software installed and
configured on my notebook PC
according to the requirements
of the Internet service provider.
4. A browser like Internet
Explorer or Netscape
Navigator.
To configure your WG511T in
Infrastructure Mode, see “Basic
Installation Instructions” on
page 3-4, and locate the section
for your version of Windows.
For assistance with configuring
the TCP/IP Internet software on
a PC, see “Preparing Your
Computers for TCP/IP
Networking” on page C-1 or refer
to the PC Networking Tutorial on
the NETGEAR 108 Mbps
Wireless PC Card WG511T
Resource CD (SW-10036-01)
and the Help information
provided in the Windows system
you are using.
.
Table 2-1. A Road Map for How to Get There From Here ...
If I Want To ... ? What Do I Do? What’s Needed? How Do I?

User Manual for the NETGEAR 108 Mbps Wireless PC Card 32-bit CardBus WG511T
2-6 Introduction
Exchange files
between a
wirelessly
connected
notebook
computer and
other
computers in a
my combined
wireless and
wired
network.
1. Use the
Windows
Network
Neighborhood
feature to
browse for
computers in
the combined
wireless and
wired network.
2. Browse the
hard drive of
the target
computer in
the network in
order to locate
the directory or
files you want
to work with.
3. Use the
Windows
Explorer copy
and paste
functions to
exchange files
between the
computers.
1. The notebook computer I am
using to connect to the
wireless network needs to be
configured with the Windows
Client and File and Print
Sharing.
2. The notebook computer I am
using to connect to the
wireless network needs to be
configured with the same
Windows Workgroup or
Domain settings as the other
Windows computers in the
combined wireless and wired
network.
3. Any Windows networking
security access rights such as
login user name/ password
that have been assigned in the
Windows network or for
sharing particular files must be
provided when Windows
prompts for such information.
4. If so-called Windows ‘peer’
Workgroup networking is being
used, the drive, file system
directory, or file need to be
enabled for sharing.
For assistance with Windows
networking software, see
Appendix C, “Preparing Your
PCs for Network Access” for
configuration scenarios or refer
to the Help system included with
your version of Windows.
Windows Domain settings are
usually managed by corporate
computer support groups.
Windows Workgroup settings
are commonly managed by
individuals who want to set up
small networks in their homes, or
small offices.
For assistance with setting up
Windows networking, refer to the
PC Networking Tutorial on the
NETGEAR 108 Mbps Wireless
PC Card WG511T Resource CD
(SW-10036-01) and the Help
information provided in the
Windows system you are using.
Table 2-1. A Road Map for How to Get There From Here ...
If I Want To ... ? What Do I Do? What’s Needed? How Do I?