NETGEAR AXM762 User manual

Installation
ProSAFE® 10 Gigabit Ethernet SFP+
Module
Model AXM762
Install Your Optical Module
The 10 Gigabit small form-factor pluggable (SFP+) module provides a full-
duplex 10G bps each direction for Ethernet operation on NETGEAR managed
switches.
The switch will automatically detect the AXM762, so you can simply plug it
into an available module slot.
The module can be inserted or removed while the switch is operational.
AXM762
Technical Specifications
Standards IEEE 802.3ae 10GBase-LR
Wavelength 1310n m
Dimensions (HxWxD) 0.46” x 0.53” x 2.19”
(11.9 mm x 13.7 mm x 55.7 mm)
Weight 19.2g
Operating Temperature 32 -158º F (0 - 70ºC)
Storage Temperature 32 -185 ºF (0 - 85ºC)
Operative relative humidity 85% @ (25ºC)
Operating Distance 2m - 10km for 9/125 um SMF
Connectors LC for 9um/125um single mode cable
Power Consumption <1.5w
MTBF 4,986,536 hr (569 years)
Safety Certification UL 1950 CSA 22.2 No. 950
Environmental Compliance RoHS
Installing an AXM762 Module
Insert the module firmly into the slot that supports the SFP+ interface.
Make sure the optical cable you use is single mode LC to LC duplex cable.
Removing an AXM762 Module
Release the module latch by pulling down the handle bar across the module,
and pull the module out of the module slot.

NETGEAR INTL LTD
Building 3, University Technology Centre
Curraheen Road, Cork, Ireland
NETGEAR, Inc.
350 East Plumeria Drive
San Jose, CA 95134, USA
© NETGEAR, Inc., NETGEAR and the NETGEAR Logo
are trademarks of NETGEAR, Inc. Any non‑NETGEAR
trademarks are used for reference purposes only.
May 2016
Support
Thank you for purchasing this NETGEAR product. You can visit
www.netgear.com/support to register your product, get help, access the latest
downloads and user manuals, and join our community. We recommend that you
use only ocial NETGEAR support resources.
For the current EU Declaration of Conformity, visit
http://support.netgear.com/app/answers/detail/a_id/11621/.
For regulatory compliance information, visit
http://www.netgear.com/about/regulatory/.
See the regulatory compliance document before connecting the power supply.
Regulatory Compliance
Statement of Conditions
In the interest of improving internal design, operational function, and/or
reliability, NETGEAR reserves the right to change the product described
in this document without notice. NETGEAR does not assume any liability
that may accrue due to the use or application of the product(s) or circuit
layout(s) described herein.
Certificate of Manufacture/Importer
It is hereby certified the NETGEAR model AXM762 has been suppressed
in accordance with the condition set out in MBPT|Amtsb|Vfg 243/1991
and vfg 46/1992. The operation of some equipment (for example, test
transmitters) in accordance with regulation may, however, be subject to
certain restrictions. Please refer to the note in the operating instructions.
Federal Oce for Telecommunications Approvals has been notified of the
placing of this equipment on the market and has been granted the right to
test the series for compliance with regulation.
Note: This device has been tested and found to comply with limits
for a Class B digital device, pursuant to part 15 of FCC rules. These
limits are designed to provide reasonable protection against harmful
interference in a commercial installation.
Laser Safety Warning
This is a Class 1 laser product.
Warning: Because invisible laser radiation may be emitted from ap-
erture of the port when no fiber cable is connected, avoid exposure
to laser radiation and do not stare into the open aperture.
This symbol was placed in accordance with the European Union Directive 2002/96 on the Waste Electrical
and Electronic Equipment (the WEEE Directive). If disposed of within the European Union, this product
should be treated and recycled in accordance with the laws of your jurisdiction implementing the WEEE
Directive.
EC Directive WEEE wheelie bin logo
bar denotes that the product was built after August 14th, 2005