NETGEAR NTV350 - HD Media Player User manual

NeoTV 350 HD Media Player (NTV350)
Installation Guide

©2010 NETGEAR, Inc. All rights reserved.
Technical Support
Thank you for selecting NETGEAR products.
Locate the serial number on the label of your product and use it to register
your product at http://www.NETGEAR.com/register. Registration is required
before you can use the telephone support service. Registration at the
NETGEAR website is strongly recommended.
Go to http://support.netgear.com for product updates and Web support.
For complete DoC please visit the NETGEAR EU Declarations of
Conformity website at: 
http://kb.netgear.com/app/answers/detail/a_id/11621/
Trademarks
NETGEAR, the NETGEAR logo, ReadyNAS, NeoTV, ProSafe, Smart
Wizard, and Auto Uplink are trademarks or registered trademarks of
NETGEAR, Inc. Other brand and product names are registered trademarks
or trademarks of their respective holders.
Statement of Conditions
In the interest of improving internal design, operational function, and/or
reliability, NETGEAR reserves the right to make changes to the products
described in this document without notice. NETGEAR does not assume
any liability that may occur due to the use or application of the product(s) or
circuit layout(s) described herein.

3
Package Contents
Ethernet cable
Remote control
NeoTV 350
Power adapter
Component cableA/V cable
Stand
AAA batteries (2)

4
Front and Back View
USB 2
Ethernet
HDMI
SPDIF
Component
A/V
Power
Card reader/
On/Off
button
USB 1
memory stick*
*4-in-1 card reader, SD/MMC/xD/Memory Stick
(Composite)
and
USB 3
Installation
Connect the NeoTV™350 to your TV, then connect a USB or
memory card storage device to the card reader or a USB port. You
can also connect the NeoTV 350 to your home network, as shown
in the following sections.

5
Step 1: Connect the TV
AV (Composite)
HDMI (not included)
Component
A component cable and an A/V cable are provided in the package.
You can use one of these cables, or an HDMI cable (sold
separately) to connect the NeoTV 350 to your TV.
Step 2: Connect Your Home Network
Connecting to your home network lets the NeoTV 350 HD media
player access media on your computers and your Internet service.
To connect you can use one of these methods:
• Ethernet cable, provided
• WNCE2001 wireless adapter (sold separately)
• Powerline adapters (sold separately)

6
Ethernet (Wired) Network Connection
An Ethernet cable is provided in the package. For a wired
connection, you can use this Ethernet cable to connect the NeoTV
350 to your router.
After you have connected the NeoTV 350 to your TV and to your
router, attach the power adapter and plug it into an electrical outlet.
Power adapter Ethernet cable
NeoTV 350
Router

7
Wireless Network Connection
You can use the Universal WiFi Internet Adapter (sold separately)
to connect to a wireless router. Follow the adapter setup
instructions. Then connect its Ethernet cable and USB power cable
to the NeoTV 350 as shown.
Ethernet cable
NeoTV 350
Wireless router
WiFi
Internet
adapter
USB power cable

8
Powerline Network Connection
The NETGEAR Home Theater Internet Connection Kit (XAVB1004)
(sold separately) lets you use your electrical line to connect to a
router. The following illustration shows a sample powerline network.
Home Theater
NeoTV 350 Router
Internet Connection Kit

9
Remote Control
Power
Select/Play/Info
Left/Rewind,
Down
Back
Menu
Up
Right/Fast Forward,
Options
Zoom Eject
Volume Up
Previous/Page Up Next/ Page Down
Play/Pause
Stop
Volume Down
Rotate photo Rotate photo
counter-clockwise clockwise
To use the remote control, install the batteries from the package,
and aim the remote control at the front of the NeoTV 350. See the
User’s Manual for information about NeoTV 350 features.

10
FAQs
1. I can’t see the NeoTV 350 startup screen or menu.
Make sure that the TV input is set to the port where the
NeoTV 350 cable is connected and make sure that all cable
connections are firmly secured.
2. How do I get the best signal from my remote?
Aim the remote at the front of the NeoTV 350.
3. What are the USB ports used for?
You can use these ports to connect a flash drive, or a USB
external drive (hard drive), or a larger personal USB drive
that is powered separately.
The file formats supported by the USB ports are FAT16,
FAT32, and NTFS.
4. My personal USB drive is not accessible.
Your USB drive might require external power. The NeoTV
350 USB ports provide only 5 volts and 500 mA.
5. How can I reset the NeoTV 350?
To reset your device to factory settings, on your screen
navigate to Setup/System and select Factory Default.

11
6. What network speeds do you need to play Internet content?
NETGEAR recommends at least 1.2Mbps. You might also
need a router if you cannot connect the player directly to
your cable or DSL modem.
Troubleshooting
• The remote control does not respond.
Check to see if the battery is inserted correctly.
• No audio/visual output.
-Make sure that the A/V (RCA) and component cables
are inserted completely and firmly at both ends.
-Remove the power cable and insert it again.
• Using HDMI to DVI converter.
HDMI to DVI converters are not supported.

NETGEAR, Inc.
350 East Plumeria Drive
San Jose, CA 95134 USA
August 2010