NETGEAR FSM726E - ProSafe Switch User manual

24/7
TECHNICAL
SUPPORT*
1-888-NETGEAR (638-4327)
Email: [email protected]
ProSafe®24-port 10/100 L2
Managed Switch with 2 Combo Gigabit Ethernet Ports Data Sheet
FSM726E
“Single IP Address Management” Feature Enables Easy Network Management
NETGEAR’s low-cost, Fast Ethernet switches deliver maximum throughput and flexibility where
you need it — to high-density workgroups at the edge of the network, or in the backbone of
small networks. The ProSafe FSM726E is managed 24-port switches with auto-sensing 10/100
ports and two 10/100/1000 ports. This enables fiber connectivity through two hot-swappable
small form-factor pluggable (SFP) Gigabit interfaces. The non-blocking design of the switches
delivers simultaneous, full wire-speed, low-latency throughput to all ports. In addition, their 1U
rack-mount form factor uses less rack space and provides a lower per-port cost than comparable
Fast Ethernet switches.
Multiple NETGEAR fully managed switches can be managed via a single IP address. Robust
security features include IEEE 802.1x port-based authentication and access control lists (ACL),
ensuring that only authorized users can access your network. Secure management of the
switches is available through Secure Sockets Layer (SSLv3) for the Web GUI and Secure Shell
(SSH) for command-line sessions. Additionally, switches can be securely managed via SNMPv3
with NETGEAR’s ProSafe Network Management Software NMS100. For workgroup deployments
in cost-sensitive organizations that require Layer 2 switching, and additional Gigabit capability,
NETGEAR’s ProSafe 10/100 Layer 2 Switches deliver the ideal access-edge solution.
Powerful In desktop switching environments, wire-speed performance with full QoS control for all 10/100
interfaces is critical. The 2 Gigabit Ethernet combo interfaces provide unprecedented flexibility,
attaching bandwidth-thirsty file servers, or aggregating critical data to the core of your network.
Easy-to-use Simplify and reduce IT staff workload and mean time to repair with intuitive, GUI-based device
configuration, and an industry-standard command-line interface (CLI). Additionally, up to 24
switches can be managed via a single IP address using the Web GUI interface.
Outstanding Value With their high-value price point, flexible design, and reduced maintenance requirements,
NETGEAR’s ProSafe 10/100 Layer 2 Switch solutions yield a high return on investment, and
are ideal for delivering highly reliable, converged voice, video, and data services over a single
network infrastructure.
*

ProSafe®24-port 10/100 L2 Managed Switch with 2 Combo Gigabit Ethernet Ports FSM726E
Technical Specifications
Network Protocol and Standards•
Compatibility
IEEE 802.3 10BASE-T–
IEEE 802.3u 100BASE-TX–
IEEE 802.3z 1000BASE-X–
IEEE 802.3ab 1000BASE-T–
IEEE 802.3x flow control–
Layer 2 Services•
IEEE 802.1Q static VLAN (up to 512)–
IEEE 802.1p Class of Service (CoS)–
IEEE 802.1D Spanning Tree Protocol–
MAC based VLAN–
IEEE 802.1v protocol VLAN & port VLAN–
IEEE 802.1w Rapid Spanning Tree Protocol–
IEEE 802.1s Multiple Spanning Tree Protocol–
IEEE 802.3ad link aggregation–
(Static, LACP)
IEEE 802.1x port access authentication–
IGMP querier–
IGMP v1, v2, v3 snooping support–
Network storm protection, including–
broadcast, multicast and unicast traffic
Static multicast filtering–
Ingress rate limit in 1Kbps increments–
Protected port–
Private Group VLAN–
Double VLAN (Q-in-Q)–
MAC filter–
Port security–
Layer 3 Services•
Access Control Lists - MAC, IP, TCP–
ACLs - 100 list/224 rules–
DiffServ QoS (RFC 2998)–
DNS caching–
DHCP/BOOTP relay - primary and–
backup (RFC3046, option 82)
UDP relay–
Switch Management Specifications•
SNMP v1, v2c, v3 with multiple–
IP addresses
RFC 1157, 1901-1910, 2574, 2575–
RFC 768 UDP–
RFC 854-859 telnet–
RFC 951 BOOTP–
RFC 1027 Proxy ARP–
RFC 1213 MIB II–
RFC 1757 RMON groups 1,2,3, and 9–
RFC 1215 SNMP traps–
RFC 1493 bridge MIB–
RFC 1643 Ethernet interface MIB–
RFC 1534 DHCP and BOOTP–
interoperation
RFC 2030 Simple Network Time–
Protocol (SNTP)
RFC 2131, 2132 DHCP and BOOTP–
RFC 2236 IGMP v2–
RFC 3376 IGMP v3–
RFC 2865 RADIUS (both switch and–
management access)
RFC 2866 RADIUS accounting–
Private enterprise MIB–
Port mirroring support (many-to-one)–
CPU traffic monitoring–
SYSLOG–
Firmware upgrade via TFTP or HTTP–
Port description–
TACACS+–
IEEE 802.1AB Link Layer Discovery–
Protocol (LLDP)
ANSI/TIA-1057 LLDP Media Endpoint–
Discovery (LLDP-MED)
DHCP server–
DHCP option 81–
Single IP Address Management•
(firmware version 7.3 or higher)
Manage up to 48 fully–
managed switches
Feature can be used with the–
following models:
- FSM726E, FSM7226RS, FSM7250RS
- FSM7328S, FSM7352S, FSM7328PS,
FSM7352PS
- GSM7224R, GSM7248R
- GSM7328S, GSM7328FS, GSM7352S
User Interfaces•
Command-line interface (CLI)–
via console port
Prosafe Control Center Web-based–
management via embedded HTTP
server protected with Secured
Sockets Layer (HTTPS)
(SSLv3) or Transport Layer Security (TLS v1)–
Telnet remote login (5 sessions) securable–
with Secure Shell (SSH v1.5, v2)
LEDs•
Per port: Speed, link, activity–
Per device: Power, fan status–
Physical Interfaces•
24 RJ-45 connectors for–
10BASE-T, 100BASE-TX (Auto Uplink
and auto negotiate on all ports)
2 1000Base-T with optional SFP–
connectors for fiber connection
RS-232 console port–
–
–
–
–
–
–
–
–
–
Internet
Broadband
modem
Desktop PC with
FA311
Desktop PC with
NMS100 Software
Notebook PC with
FA511
Servers with
GA311
L2 Managed Switch
FSM726E
Desktop PC with
GA311
ProSafe SSL312
Concentrator 25
WG302 ProSafe 802.11g
Wireless Access Point
GS108 ProSafe
8-port Gigabit
Switch
Servers with
GA311
FVS338 ProSafe
VPN Firewall

350 E. Plumeria Drive
San Jose, CA 95134-1911 USA
1-888-NETGEAR (638-4327)
E-mail: [email protected]
www.NETGEAR.com
© 2009 NETGEAR, Inc. NETGEAR, the NETGEAR Logo, NETGEAR Digital Entertainer Logo, Connect with Innovation, FrontView, IntelliFi,
PowerShift, ProSafe, ProSecure, RAIDar, RAIDiator, RangeMax, ReadyNAS, Smart Wizard, X-RAID, and X-RAID2, are trademarks and/
or registered trademarks of NETGEAR, Inc. and/or subsidiaries in the United States and/or other countries. Mac and the Mac logo are
trademarks of Apple Inc., registered in the U.S. and other countries. Other brand names mentioned herein are for identification purposes
only and may be trademarks of their respective holder(s). Information is subject to change without notice. All rights reserved.
*Basic technical support provided for 90 days from date of purchase.
†Lifetime warranty for product purchased after 05/01/2007. For product purchased before 05/01/2007, warranty is 5 years.
D-FSM726E-4
ProSafe®24-port 10/100 L2 Managed Switch with 2 Combo Gigabit Ethernet Ports FSM726E
Performance Specifications•
Forwarding modes: Store and forward–
Bandwidth: 8.8 Gbps; 6.5 Mpps–
Switch latency: Less than 80–
microseconds for 64-byte frames
System memory: 128 MB–
Packet buffer memory: 1 MB–
Code storage (flash): 32 MB–
MAC address size: 8 K–
Number of VLANs: 512 (1-4093)–
Number of trunks: 24–
Number of QoS queues: 8–
Jumbo frame support: up to 9 K–
packet size
Number of Mulitcast groups: 256–
Electrical Specifications•
Power consumption: 15W–
100-240V AC/50-60 Hz universal input–
Physical Specifications•
Dimensions (w x d x h):–
440 x 205 x 43 mm
(17.32 x 8.1 x 1.7 in)
Weight: 2.8 kg (6.1 lb)–
Acoustic noise: (ANSI-S10.12) 36.6 dB–
Fan speed: thermal controlled up–
to 6000 rpm
Heat dissipation: 50 Btu/hr–
Mean time between failures (MTBF):–
562,110 hours (~64 years)
Thermal sensor–
–
–
–
Environmental Specifications•
Operating temperature: -5° to 50° C–
(23° to 131° F)
Storage temperature: -20° to 70° C–
(-4° to 158° F)
Operating humidity: 90% maximum–
relative humidity, non-condensing
Storage humidity: 95% maximum–
relative humidity, non-condensing
Operating altitude: 10,000 ft–
(3,000 m) maximum
Storage altitude: 10,000 ft–
(3,000 m) maximum
Electromagnetic Emissions•
CE mark, commercial–
FCC Part 15 Class A–
VCCI Class A–
EN 55022 (CISPR 22), Class A–
C-Tick–
Electromagnetic Immunity•
EN 50082-1, EN 55024–
Safety•
CE mark, commercial–
CSA certified (CSA 22.2 #950)–
UL listed (UL 1950)–
CUL IEC 950–
EN 60950–
Warranty
NETGEAR Lifetime Warranty–
Package Contents
ProSafe L2 Managed Switch–
(FSM726E)
Power cable–
Null modem cable–
Rubber footpads for tabletop–
installation
Rack-mount kit–
Quick Installation guide–
Resource CD-ROM with user manual–
ProSafe NMS100 30-Day Trial–
CD-ROM
Warranty/support information card–
NETGEAR Related Products
1000BASE-SX SFP GBIC (AGM731F)–
1000BASE-LX SPF GBIC (AGM732F)–
1000BASE-ZX SFP GBIC (AGM733)–
NMS100 Network Management Software–
ProSupport Service Packs
Available
OnCall 24x7, Category 1•
PMB0331-100 (US)–
PMB0331 (non-US)–
XPressHW, Category 1•
PRR0331–
Ordering Information
North America: FSM726E-100NAS–
Europe: FSM726E-100EUS–
Asia: FSM726E-100AJS–