NETGEAR GS724AT - ProSafe Gigabit Smart Switch Manual

202-10359-01
January 2008
NETGEAR, Inc.
4500 Great America Parkway
Santa Clara, CA 95054 USA
GS700AT Hardware
Installation Guide

ii
v1.0, January 2008
© 2007 by NETGEAR, Inc. All rights reserved.
Technical Support
Please refer to the support information card that shipped with your product. By registering your product at
http://www.netgear.com/register, we can provide you with faster expert technical support and timely notices of product
and software upgrades.
NETGEAR, INC. Support Information
Phone: 1-888-NETGEAR, for US & Canada only. For other countries, see your Support information card.
E-mail: [e-mail]
North American NETGEAR website: http://www.netgear.com
Trademarks
NETGEAR, the NETGEAR logo, ProSafe, and Auto Uplink are trademarks or registered trademarks of NETGEAR, Inc.
Microsoft, Windows, and Windows NT are registered trademarks of Microsoft Corporation. Other brand and product
names are registered trademarks or trademarks of their respective holders. Portions of this document are copyright
Intoto, Inc.
Statement of Conditions
In the interest of improving internal design, operational function, and/or reliability, NETGEAR reserves the right to
make changes to the products described in this document without notice.
NETGEAR does not assume any liability that may occur due to the use or application of the product(s) or circuit
layout(s) described herein.
Certificate of the Manufacturer/Importer
It is hereby certified that the GS700AT Smart Switch has been suppressed in accordance with the conditions set out in
the BMPT-AmtsblVfg 243/1991 and Vfg 46/1992. The operation of some equipment (for example, test transmitters) in
accordance with the regulations may, however, be subject to certain restrictions. Please refer to the notes in the operating
instructions.
The Federal Office for Telecommunications Approvals has been notified of the placing of this equipment on the market
and has been granted the right to test the series for compliance with the regulations.
Bestätigung des Herstellers/Importeurs
Es wird hiermit bestätigt, daß das Switch gemäß der im BMPT-AmtsblVfg 243/1991 und Vfg 46/1992 aufgeführten
Bestimmungen entstört ist. Das vorschriftsmäßige Betreiben einiger Geräte (z.B. Testsender) kann jedoch gewissen
Beschränkungen unterliegen. Lesen Sie dazu bitte die Anmerkungen in der Betriebsanleitung.
Das Bundesamt für Zulassungen in der Telekommunikation wurde davon unterrichtet, daß dieses Gerät auf den Markt
gebracht wurde und es ist berechtigt, die Serie auf die Erfüllung der Vorschriften hin zu überprüfen.
Voluntary Control Council for Interference (VCCI) Statement
This equipment is in the Class B category (information equipment to be used in a residential area or an adjacent area
thereto) and conforms to the standards set by the Voluntary Control Council for Interference by Data Processing
Equipment and Electronic Office Machines aimed at preventing radio interference in such residential areas. When used
near a radio or TV receiver, it may become the cause of radio interference. Read instructions for correct handling.

v1.0, January 2008
iii
Regulatory Compliance Information
This section includes user requirements for operating this product in accordance with National laws for usage of radio
spectrum and operation of radio devices. Failure of the end-user to comply with the applicable requirements may result
in unlawful operation and adverse action against the end-user by the applicable National regulatory authority.
NOTE: This product's firmware limits operation to only the channels allowed in a particular Region or Country.
Therefore, all options described in this user's guide may not be available in your version of the product.
Europe – EU Declaration of Conformity
Marking by the above symbol indicates compliance with the Essential Requirements of the R&TTE Directive of the
following EU Council Directives: 89/336/EEC and LVD 73/23/EEC. Compliance is verified by testing to the following
standards: EN55022 Class A, EN55024 and EN60950-1.
EN300 328, EN301 489-17, EN60950
FCC Requirements for Operation in the United States
FCC Information to User
This product does not contain any user serviceable components and is to be used with approved antennas only. Any
product changes or modifications will invalidate all applicable regulatory certifications and approvals
FCC Guidelines for Human Exposure
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment
should be installed and operated with minimum distance of 20 cm between the radiator and your body.
This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
FCC Declaration Of Conformity
We NETGEAR, Inc., 4500 Great America Parkway, Santa Clara, CA 95054, declare under our sole responsibility that
the model GS700AT Smart Switch with Gigabit Portscomplies with Part 15 of FCC Rules. Operation is subject to the
following two conditions:
• This device may not cause harmful interference, and
• This device must accept any interference received, including interference that may cause undesired operation.
FCC Radio Frequency Interference Warnings & Instructions
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of
the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential
installation. This equipment uses and can radiate radio frequency energy and, if not installed and used in accordance
with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following methods:
• Reorient or relocate the receiving antenna
• Increase the separation between the equipment and the receiver

v1.0, January 2008
iv
• Connect the equipment into an electrical outlet on a circuit different from that which the radio receiver is connected
• Consult the dealer or an experienced radio/TV technician for help.
Modifications made to the product, unless expressly approved by NETGEAR, Inc., could void the user's right to operate
the equipment.
D
Canadian Department of Communications Radio Interference Regulations
This digital apparatus (GS700AT Smart Switch with Gigabit Ports) does not exceed the Class B limits for radio-noise
emissions from digital apparatus as set out in the Radio Interference Regulations of the Canadian Department of
Communications.
Product and Publication Details
Model Number: GS700AT
Publication Date: January 2008
Product Family: Smart Switch
Product Name: GS700AT Smart Switch
Home or Business Product: Business
Language: English
Publication Part Number: 202-10359-01
Publication Version Number: 1.0
FOR HOME OR OFFICE USE
Tested to Comply
with FCC Standards
GS700AT Smart Switch with Gigabit

v
v1.0, January 2008
Contents
About This Guide
Conventions, Formats and Scope .................................................................................... ix
How to Use This Manual ...................................................................................................x
How to Print this Manual ....................................................................................................x
Revision History ................................................................................................................ xi
Chapter 1
Introduction
Overview .......................................................................................................................1-13
Switch Features ............................................................................................................1-15
Package Contents ........................................................................................................1-16
Chapter 2
Installation
Step 1: Preparing the Site .............................................................................................2-29
Step 2: Installing the Switch ..........................................................................................2-30
Installing the Switch on a Flat Surface ...................................................................2-30
Installing the Switch in a Rack ...............................................................................2-30
Step 3: Checking the Installation ..................................................................................2-31
Step 4: Connecting Devices to the Switch ....................................................................2-32
Step 5: Installing an SFP GBIC Module ........................................................................2-32
Step 6: Applying AC Power ..........................................................................................2-33
Step 7: Managing the Switch through a Web Browser or the PC Utility for Initial
Configuration ................................................................................................................2-34
Chapter 3
Physical Description
GS724 AT Front and Back Panel Configuration ...........................................................3-19
LED Designations .........................................................................................................3-20
System LEDs .........................................................................................................3-20
Device Hardware Interfaces .........................................................................................3-20
RJ-45 Ports ............................................................................................................3-21

GS700AT Hardware Installation Guide
vi
v1.0, January 2008
SFP GBIC Module ..................................................................................................3-21
Factory Defaults Button ..........................................................................................3-21
Appendix A
Troubleshooting
Troubleshooting Chart ................................................................................................... A-1
Additional Troubleshooting Suggestions ....................................................................... A-2
Network Adapter Cards ........................................................................................... A-2
Configuration ........................................................................................................... A-2
Switch Integrity ........................................................................................................ A-2
Auto-negotiation ...................................................................................................... A-3
Appendix B
Technical Specifications
Network Protocol and Standards Compatibility ....................................................... B-1
Management ........................................................................................................... B-1
Interface .................................................................................................................. B-1
LEDs ....................................................................................................................... B-1
Performance Specifications ..................................................................................... B-1
Power Supply .......................................................................................................... B-1
Physical Specifications ............................................................................................ B-2
Environmental Specifications .................................................................................. B-2
Electromagnetic Emissions ..................................................................................... B-2
Electromagnetic Immunity ....................................................................................... B-2
Safety ...................................................................................................................... B-2
Modules ................................................................................................................... B-3

ix
v1.0, December 2007
About This Guide
Congratulations on the purchase of the NETGEAR Smart Switch. The NETGEAR®GS700AT
Hardware Installation Guide describes how to install, configure and troubleshoot the smart switch.
The information in this manual is intended for readers with intermediate computer and Internet
skills.
Conventions, Formats and Scope
The conventions, formats, and scope of this manual are described in the following paragraphs:
•Typographical Conventions. This manual uses the following typographical conventions:
•Formats. This manual uses the following formats to highlight special messages:
Italic Emphasis, books, CDs, file and server names, extensions
Bold User input, IP addresses, GUI screen text
Fixed Command prompt, CLI text, code
italic URL links
Note: This format is used to highlight information of importance or special interest.
Tip: This format is used to highlight a procedure that will save time or resources.
Warning: Ignoring this type of note may result in a malfunction or damage to the
equipment.

GS700AT Hardware Installation Guide
x
v1.0, December 2007
•Scope. This manual is written for the GS700AT according to these specifications:
How to Use This Manual
The HTML version of this manual includes the following:
• Buttons, and , for browsing forwards or backwards through the manual one page
at a time.
•The button displays the table of contents and the button. Double-click on a link
in the table of contents or index to navigate directly to where the topic is described in the
manual.
•The button accesses the full NETGEAR, Inc. online knowledge base for a particular
product model.
• Links to PDF versions of the full manual and individual chapters.
How to Print this Manual
To print this manual you can select one of the following options, according to your requirements.
•Printing a Page in the HTML View - Each page in the HTML version of the manual is
dedicated to a major topic. Use the Print button on the browser toolbar to print the page
contents.
•Printing a Chapter - Use the PDF of This Chapter link at the top left of any page.
Danger: This is a safety warning. Failure to take heed of this notice may result in
personal injury or death.
Product Version GS700AT Smart Switch
Manual Publication Date December 2007
Note: Product updates are available on the NETGEAR, Inc. web site at
http://kbserver.netgear.com/main.asp.

GS700AT Hardware Installation Guide
xi
v1.0, December 2007
– Click the PDF of This Chapter link at the top right of any page in the chapter you want to
print. The PDF version of the chapter you were viewing opens in a browser window.
– Your computer must have the free Adobe Acrobat reader installed in order to view and
print PDF files. The Acrobat reader is available on the Adobe Web site at
http://www.adobe.com.
– Click the print icon in the upper left of the window.
•Printing the Full Manual - Use the Complete PDF Manual link at the top left of any page.
– Click the Complete PDF Manual link at the top left of any page in the manual. The PDF
version of the complete manual opens in a browser window.
– Click the print icon in the upper left of the window.
Revision History
Tip: If your printer supports printing two pages on a single sheet of paper, you can
save paper and printer ink by selecting this feature.
Tip: If your printer supports printing two pages on a single sheet of paper, you can
save paper and printer ink by selecting this feature.
Part Number Version
Number Date Description
202-10359-01 1.0 January 2008 First release

GS700AT Hardware Installation Guide
xii
v1.0, December 2007