NETGEAR ProSafe FS726AT User manual

FS726AT
Modular Fast Ethernet Switch with
24-Port 10/100 Mbps + 2 Gigabit Ports
Versatile
Capable
Easy-to-Use
Efficient
Installation
-Ready
Everybody’s Connecting. ™
• Help is there when you need it!
NETGEAR provides 24x7
telephone and e-mail technical
support* in English with selected
local language support during
office hours.
Bring flexibility and expandability to your network
NETGEAR’s FS726AT Modular Fast Ethernet Switch gives you two uplink bays for copper or fiber
gigabit modules. It lets you link up to high-speed servers, connect switches, and combine fiber
and copper networks. And whether you need gigabit uplink or additional port capacity, you’ll
have the flexibility to upgrade your network as your business grows and as your budget allows.
The high-speed, auto-sensing, 10/100 Mbps ports in the FS726AT support Auto UplinkTM for
easy-to-use, automatic configuration. They also provide non-blocking, wire-speed filtering
and forwarding of traffic. Easy-to-read, front LED’s show ongoing switch status and simplify
troubleshooting. Ships with an AG711T copper gigabit module to provide instant 1000BASE-T
uplink connectivity.
Two front module bays allow you to upgrade with copper or fiber gigabit uplinks. Use the copper
module with an additional copper module, two fiber modules, or one of each.
Equipped with 24 shielded RJ-45 network ports delivering data at 10/100 Mbps.
LED’s located on the front panel make switch status easy to observe and troubleshooting
easy to accomplish.
With non-blocking switch capacity, this powerhouse switch can move data at wire speed over fiber or
copper connections.
This sturdy switch in housed in 17” metal box and comes with a compete rack mounting kit.
Model FS726
Switch Server
with GA622T
1000 Mbps
100 Mbps
10 Mbps
PC PC MAC
Typical Network
Setup

4500 Great America Parkway
Santa Clara, CA 95054 USA
Phone: 1-888-NETGEAR
E-mail: [email protected]
www.NETGEAR.com
©2003 NETGEAR, Inc. NETGEAR®, the Netgear
logo, The Gear Guy, Everybody's connecting
and Auto Uplink are trademarks or registered
trademarks of NETGEAR, Inc. in the United
States and/or other countries. Other brand and
product names are trademarks or registered
trademarks of their respective holders.
Information is subject to change without notice.
All rights reserved.
* Free basic installation support provided
for 90 days from date of purchase; optional
premium support available.
D-FS726AT-0
Technical Specifications
•Network Protocol and Standards Compatibility:
- IEEE 802.3i 10BASE-T
- IEEE 802.3u 100BASE-TX
- IEEE 802.3ab 1000BASE-T
- IEEE 802.3x Flow Control
•Data Rate:
- 10 Mbps differential Manchester encoded,
IEEE 802.3
- 100 Mbps with 4B/5B encoding and MLT-3 physical
interface for 100BASE-TX
- 1000 Mbps with 8B/10B encoding PAM-5 physical
interface for 1000BASE-T
•Interface:
- RJ-45 connector for 10BASE-T, 100BASE-TX Fast
Ethernet, and 1000BASE-T Gigabit Ethernet
- Duplex SC fiber connector for 62.5/12 or 50/125
multimode fiber (1000BASE-SX)
•Performance Specifications:
-Frame forward rate:
- 14,800 frames/second, maximum on 10 Mbps
port (64B packets)
- 148,000 frames/second, maximum on 100 Mbps
port (64B packets)
- 1,480,000 frames/second, maximum on 1000
Mbps port (64B packets)
-Forwarding modes: Store-and-forward
-Bandwidth: 10.8 Gbps
-Network latency: <80µs (64-byte frames, 100
Mbps to 100 Mbps)
-10/100 buffer memory: 8 MB for 16 ports
-Gigabit buffer memory: 2 MB per port
-Address database size: 8,000 media access control
(MAC) addresses per system
-Addressing: 48-bit MAC address
-Acoustic noise: (ANSI-S10.12) 45 dB
-Heat dissipation: 18.99 BTU/hr
-Bandwidth: 10.8 Gbps
•Electrical Specifications:
- Power consumption: 40W maximum
•Physical Specifications:
-Dimensions: 440 x 205 x 43 mm
(17.3 x 8.1 x 1.6 in)
-Weight: 3.2 kg (7.0 lbs)
•Environmental Specifications:
-Operating temperature: 0 to 40° C (32 to 104° F)
-Storage temperature: -32 to 104° C
(-25.6 to 219.2° F)
-Operating humidity: 90% maximum relative
humidity, noncondensing
-Storage humidity: 95% maximum relative
humidity, noncondensing
-Operating altitude: 3,000 m (10,000 ft) maximum
-Storage altitude: 3,000 m (10,000 ft) maximum
Package Contents
- Fast Ethernet Switch
- Copper Gigabit Module AG711T
- Rubber footpads for tabletop installation
- Power cord
- Rack-mount kit
- User’s guide
- Support Information Card
- Warranty card
System Requirements
- Category 5 network cables
- Network card for each PC
- Network software (i.e. Windows)
NETGEAR Related Products
- FS750AT 48-port Fast Ethernet Switch
with Gigabit Uplinks
- AG711T Copper Gigabit Ethernet
Module (1000BASE-T)
- AG711F Fiber Gigabit Ethernet
Module (1000BASE-SX)
FS726AT Modular Fast Ethernet Switch
UL
®