NETGEAR ProSafe FS750T2 User manual

FS750T2
ProSafe 48-port 10/100
Smart Switch with 2 Gigabit Ports
High Port Density, Gigabit Capability, and Easy
Browser-based Management
NETGEAR has packed a lot of value into this high density switch. Start with high port density
in a one unit box, add two gigabit uplinks to give an added edge to any growing business,
then add key switch management capabilities and you have a powerful switch that costs a lot
less than you'd expect.
Forty-eight 10/100 Mbps ports and two copper Gigabit Ethernet ports connect to servers or
a Gigabit-speed backbone for a non-stop, always available 10/100/1000-enabled network
that can quickly deliver large multimedia, image, and video files. All 50 shielded RJ-45 ports
automatically negotiate to the highest speed and support Auto Uplink™ technology to make
the right link. Two hot-swappable Small Form-factor Pluggable (SFP)** GBIC slots provide
optional fiber connectivity for greater distance. Shipped ready to go straight out of the box,
it delivers switching that's easy to set up and use.
In addition, an intuitive, Web-browser interface offers the simple Smart Switch management,
making it a snap to monitor switch performance, configure ports, even set up port trunks,
VLANs, and traffic prioritization. Alternatively, use SNMP-based software to manage your
Smart Switch.*** Shipped ready for use straight out of the box, it delivers switching that’s
easy to set up and use. NETGEAR ProSafe Smart Switches are ideal for adding basic management
to your unmanaged networks and extending your managed networks.
Forty-eight 10/100 ports and two Gigabit ports deliver non-blocking, full-speed packet forwarding from
the edge of your network to the core.Two SFP GBIC fiber slots provide optional fiber connectivity for
greater distance.
Smart Switch capability enables the most key management features for the price of an unmanaged
switch. Included are performance monitoring, port configuration, VLAN for traffic control, port
trunking for increased bandwidth, and Class of Service (CoS) for traffic prioritization.
Ideal for growing businesses who want the benefits of management without the cost and complexity
of a managed network.
LEDs located on the front panel make switch status easy to observe and troubleshooting easy to
accomplish. Made to last, this durable switch is housed in a 17-inch metal box and comes with a
rack mounting kit.
**Use with NETGEAR AGM731F 1000BASE-SX SFP GBIC module or NETGEAR AGM732F 1000BASE-LX SFP GBIC module.
***Firmware upgrade available Q2 2005
Powerful
Intelligent
Right Sized
Well Designed
• Help is there when you need it!
NETGEAR provides, 24x7
technical support* in English,
with selected local language
support during office hours.
Desktop PCs
Notebook PCs
FVL328 ProSafe
VPN Firewall100
WG302 ProSafe 802.11g
Wireless Access Point
FS750T2 48 Port 10/100 Mbps
Smart Switch with 2 Gigabit Ports GS108 8 Port
Gigabit Desktop Switch
Broadband
Modem
POWER CABLE
STATUS
ETHERNET
USB
Broadband Cable Mod
em
Internet
Servers

Technical Specifications
• Network Protocol and Standards
Compatibility:
-IEEE 802.3 10BASE-T
-IEEE 802.3u 100BASE-TX
-IEEE 802.3ab 1000BASE-T
-IEEE 802.3x full-duplex flow control
• Interfaces
-48 10/100 Mbps auto sensing Fast Ethernet
switching ports
-2 built-in RJ-45 Gigabit Ethernet ports for
10/100/1000 Mbps connectivity
-2 SFP slots for fiber Gigabit Ethernet modules
• Port Functions
-Auto-sensing and auto-negotiating capabilities
for all ports
-Auto Uplink™on all ports to make the
right connection
• Administrative Switch Management
-IEEE 802.1Q Static VLAN (Up to 64)
-Port-based VLAN (Up to 50)
-IEEE 802.1p Class of Service (CoS)
-Port-based QoS
-IEEE802.3ad (manual) Link Aggregation
-IEEE 802.1D Spanning Tree Protocol***
-RFC 1157 SNMP v1***
-RFC 1213 MIB II***
-RFC 1643 Ethernet Interface MIB***
-RFC 1493 Bridge MIB***
-RFC 2131 DHCP client
-Private Enterprise MIB***
-Port Mirroring Support
-Web-based configuration
-Configuration Backup/Restore
-Password Access Control
-Firmware upgradeable
• Active Flow Control
-Half-duplex back-pressure control
-Full-duplex IEEE 802.3x pause frame flow control
• Performance Specifications
-Forwarding modes: Store-and-forward
-Bandwidth: 13.6 Gbps
-Network latency: Less than 20 microseconds for
64-byte frames in store-and-forward mode for100
Mbps to 100 Mbps transmission
-Buffer memory: 128 KB
-Address database size: 8,000 media access control
(MAC) addresses per system
-Addressing: 48-bit MAC address
-Mean Time Between Failure (MTBF): 59,880
hours (~ 6.8 years)
• LEDs
-Unit: Power
-Per port: Link, Activity, Speed
NETGEAR Related Products
-GA311 32-bit Gigabit
PCI Adapter
-GA511 Gigabit PC Card Adapter
-GS105 5-port Gigabit Switch
-GS108 8-port Gigabit Switch
-GS116 16-port Gigabit Switch
-GS516T 16-port Gigabit Switch
-GS524T 24-port Gigabit Switch
-FS726T 24-port 10/100 Smart
Switch with 2 Gigabit ports
-GS716T 16-port Gigabit
Smart Switch
-GS724T 24-port Gigabit
Smart Switch
-GS748T 48-port Gigabit
Smart Switch
-NMS100 Network
Management System
-P3L21 Layer 2 Support Pack
– 1 year
-P3L23 Layer 2 Support Pack
– 3 years
FS750T2 ProSafe 48-port 10/100
Smart Switch with 2 Gigabit Ports
• Power Supply
-Power Consumption: 21 W maximum
-100-240VAC/50-60 Hz universal input
• Physical Specifications
-Dimensions (H x W x D): 1.7 x 17.8 x 8.1 in.
(43 x 440 x 205 mm)
-Weight: 7.0 lbs (3.2 kg)
• Environmental Specifications
-Operating temperature: 32 to 104° F (0 to 40° C)
-Storage temperature: -4 to 158° F (-20 to 70° C)
-Operating humidity: 90% maximum relative humidity,
non-condensing
-Storage humidity: 95% maximum relative humidity,
non-condensing
-Operating altitude: 10,000 ft (3,000 m) maximum
-Storage altitude: 10,000 ft (3,000 m) maximum
• Electromagnetic Compliance
-CE mark, commercial
-FCC Part 15 Class A
-VCCI Class A
-EN 55022 (CISPR 22),
- EN 55024 (CISPR 24)
-C-Tick
• Safety
- CE mark, commercial
- CUL 60950 (Listed)/ EN60950
(Low Voltage Directive)
• Warranty
-Switch: NETGEAR 5-year warranty
System Requirements
-Category 5 network cables
-Network card for each PC
-Network software (e.g., Windows®)
Package Contents
-FS750T2 ProSafe 48-port Smart Switch with
2 Gigabit Ports
-Rubber footpads
-Power cord
-Rack-mount kit
-Smart Switch resource CD
-Smart Switch installation guide
-Warranty/Support information card
Modules
-ProSafe AGM731F 1000BASE-SX SFP GBIC:
Module with LC connectors for 50um or 62.5um
multi-mode fiber cable
-ProSafe AGM732F Fiber 1000BASE-LX SFP GBIC:
Module with LC connectors for 9um single-mode
fiber cable
4500 Great America Parkway
Santa Clara, CA 95054 USA
Phone: 1-888-NETGEAR (638-4327)
E-mail: [email protected]
www.NETGEAR.com
©2005 NETGEAR, Inc. NETGEAR®, the
Netgear Logo, Auto Uplink, ProSafe, and
Everybody's connecting are trademarks or
registered trademarks of Netgear, Inc. in
the United States and/or other countries.
Microsoft, Windows, Windows Media, and
the Windows logo are trademarks, or
registered trademarks of Microsoft
Corporation in the United States and/or
other countries. Other brand and product
names are trademarks or registered
trademarks of their respective holders.
Information is subject to change
without notice. All rights reserved.
* Free basic installation support provided
for 90 days from date of purchase.
Advanced product features and
configurations are not included in free
basic installation support; optional
premium support available.
D-FS750T2-1