Netti Dynamic System User manual

MOBILE FAMILY
USER
MANUAL
NETTI MOBILE
NETTI MOBILE INTUITIVE
NETTI DYNAMIC MOBILE
My-Netti.com
MOBILE FAMILY
COMFORT

2
Model: Netti Mobile
Language: English Version: 2015/10
My-Netti.com
CONTENTS
1. INTRODUCTION................................................................4
1.1 Areas of use/indications ....................................5
1.2 Contra indications .................................................5
1.3 Quality and durability ..........................................5
1.4 The environment and waste disposal............5
1.5 Information for re-use..........................................6
1.6 About this manual ................................................6
1.7 Netti Mobile models ............................................7
1.8 Vital measures/ technical characteristics ....8
2. QUICK REFERENCE .......................................................9
3. ELECTROMAGNETIC INTERFERENCE AND
WARNINGS...........................................................................10
4. DESCRIPTION ............................................................... 12
5. FEATURES OF NETTI MOBILE................................. 13
6. ACCESSORIES................................................................ 14
6.1 Assembly of Hip-Belt......................................... 16
6.2 Assembly of head support............................... 16
7. ASSEMBLING AND ADJUSTMENT.......................... 18
7.1 Unpacking .............................................................. 18
7.2 Backrest .................................................................. 19
7.3 Seat depth adjustment at the rear................ 19
7.4 Seat depth adjustment in front ..................... 19
7.5 Anti tip..................................................................... 19
7.6 Seat cushion ........................................................ 19
7.7 Backrest cushion.................................................20
7.8 Adjusting Velcro back.......................................20
7.9 Foot supports ......................................................20
7.10 Arm support ......................................................... 24
7.11 Control unit position...........................................24
7.12 Seat angle/tilt ...................................................... 25
7.13 Back rest angle.................................................... 25
7.14 Park brake release handle............................... 26
7.15 Storage & Transport .......................................... 26
8. NETTI MOBILE ELECTRONICS ............................... 28
8.1 Typical control system layout ........................ 28
8.1.1 Shark System -Turning it on and o ...........30
8.1.2 Out of neutral at power up (OONAPU) ....30
8.1.3 Lock ......................................................................... 31
8.1.4 Driving ................................................................... 32
8.1.5The battery gauge ............................................ 34
8.1.6Electrical tilt/recline ......................................... 35
8.1.7 The lights .............................................................. 36
8.1.8Attendant mode...................................................37
8.2 Dynamic DX2 control system with DX2-
REM420 remote and control unit.................. 38
8.2.0 Turning the DX system on and o............. 39
8.2.1 Out Of Neutral At Power Up (OONAPU).. 39
8.2.2 System lock.........................................................40
8.2.3 Sleep mode.........................................................40
8.2.4 Driving ................................................................... 41
8.2.4.1 The joystick ....................................................... 41
8.2.4.2 The drive profile ............................................. 41
8.2.5 The horn................................................................ 41
8.2.6 The seating functions ..................................... 42
8.2.6.1 Available seating functions ........................ 43
8.2.7 The lights ............................................................. 43
8.2.8 The battery gauge ...........................................44
8.2.8.1 Battery charge indication ...........................44
8.2.8.2 Other indications...........................................44
8.2.9 The Fault indicator LED ................................. 45
8.2.9.1 ‘Service due’ indication................................ 45
8.2.9.2 Fault indication.............................................. 45
8.2.10 Attendant mode..............................................46
8.2.10 ACU Quick start ..............................................46
8.3 Troubleshooting ……….........................................48
8.3.1 General fault finding check............................48
8.3.2 Battery charging - fault finding...................50
8.3.3 Turning the system on - fault finding........50
8.3.4 Driving characteristics - fault finding........51
8.3.5 Flash codes..........................................................51
Shark System - keypads - fault finding.......52
DX2 System - fault finding...............................55
9. DRIVING TECHNIQUES.............................................. 58
9.1 Driving your chair............................................... 58
9.2 To begin.................................................................. 58
9.3 Safe driving........................................................... 58
9.4 Indoor/outdoor driving.......................................... 58
9.5 Chair response..................................................... 58
9.6 Steep slopes ......................................................... 59
9.7 Transfere ................................................................59
10. BATTERIES & CHARGING .......................................60
10.1 How to charge .....................................................60
10.2 When to charge ................................................... 61
10.3 Looking after your batteries ...........................61
10.4 Replacing batteries............................................ 62
11. MAINTENANCE ............................................................ 63
11.1 Electrical components ..................................... 63
11.2 Frame & seating system .................................64
11.3 Maintenance schedule .................................... 65
12. TESTS & WARRANTY................................................ 66
12.1 Tests......................................................................... 66
12.2 Guarantee ..............................................................66
12.3 Claim........................................................................66
12.4 Spare part guarantee........................................ 67
12.5 Special adjustment/adaptation..................... 67
12.6 Combination with other products .............. 67
12.7 Service and repair .............................................. 67
13. MEASURES & WEIGHT ............................................. 68
L. NETTI MOBILE INTUITIVE - WHEELCHAIR WITH
ATTENDANT CONTROL ...................................... 70-79
G. NETTI DYNAMIC MOBILE - WHEELCHAIR WITH
DYNAMIC SEATING...............................................80-81

3
Model: Netti Mobile
Language: English Version: 2015/10 My-Netti.com
NETTI DYNAMIC MOBILE -
WHEELCHAIR WITH DYNAMIC
SEATING
1. INTRODUCTION................................................................4
2. QUICK REFERENCE .......................................................9
3. ELECTROMAGNETIC INTERFERENCE AND
WARNINGS...........................................................................10
4. DESCRIPTION ............................................................... 12
5. FEATURES OF NETTI MOBILE................................. 13
6. ACCESSORIES................................................................ 14
7. ASSEMBLING AND ADJUSTMENT.......................... 18
8. NETTI MOBILE ELECTRONICS ............................... 28
9. DRIVING TECHNIQUES.............................................. 58
10. BATTERIES & CHARGING .......................................60
11. MAINTENANCE ............................................................ 63
12. TESTS & WARRANTY................................................ 66
13. MEASURES & WEIGHT ............................................. 68
G. DYNAMIC SEATING ....................................................80
G1 DYNAMIC SEATING ACCESSORY KIT -
INTRODUCTION ..........................................................80
G2 AREAS OF USE...........................................................80
G3 CONTRA-INDICATIONS SPECIFIC TO THIS ........
ACCESSORY KIT .........................................................80
G4 DESCRIPTION .............................................................. 81
NETTI MOBILE INTUITIVE -
WHEELCHAIR WITH INTUITIVE
ATTENDANT CONTROL
1. INTRODUCTION................................................................4
2. QUICK REFERENCE .......................................................9
3. ELECTROMAGNETIC INTERFERENCE AND
WARNINGS...........................................................................10
4. DESCRIPTION ............................................................... 12
5. FEATURES OF NETTI MOBILE................................. 13
6. ACCESSORIES................................................................ 14
7. ASSEMBLING AND ADJUSTMENT......................... 28
8. ATTENDANT UNIT .......................................................46
10. BATTERIES & CHARGING .......................................60
11. MAINTENANCE ............................................................ 63
12. TESTS & WARRANTY................................................ 66
13. MEASURES & WEIGHT ............................................. 68
L1 NETTI MOBILE INTUITIVE WITH ATTENDANT
CONTROL - INTRODUCTION ................................70
L 1.2 Areas of use................................................................70
L 1.3 Contra indications....................................................70
L 1.4 Description.................................................................71
L2 ELECTRONICS ........................................................... ...71
L 2.2 Turning on Netti Mobile Intuitive.......................72
L 2.3 Speed mode .............................................................72
L 2.4 Driving ........................................................................72
L 2.5 Calibrating the Intuitive system.........................73
L 2.5 Battery gauge ..........................................................73
L 2.7 Electrical tilt/recline ...............................................74
L 2.8 Lights ...........................................................................74
L 2.9 Troubleshooting the intuitive System .............75
L3 DRIVING TECHNIQUES ............................................ 77
L 3.1 Driving your chair ....................................................77
L 3.2 To begin ......................................................................77
L 3.3 Emergency stop ......................................................77
L 3.4 Safe driving ...............................................................77
L 3.5 Indoor/outdoor driving .........................................77
L 3.6 Chair driving performance ..................................78
L 3.7 Steep slopes ..............................................................78
HOW TO READ THIS MANUAL
To enable you to find the information you need for your Netti Mobile, this manual is
provided with an additional index page.
• Netti Dynamic Mobile - wheelchair with the Dynamic seating.
• Netti Mobile Intuitive - wheelchair with Intuitive attendant control.

4
Model: Netti Mobile
Language: English Version: 2015/10
My-Netti.com
Netti Mobile
Netti Dynamic Mobile
equipped with the Dynamic
seating accessory kit.
Netti Mobile Intuitive equipped
with the Intuitive attendant
control accessory kit.
1. INTRODUCTION
Netti Mobile is a class B powered
wheelchair rated for indoor and
outdoor use. It is tested to DIN EN
12184:2009. The tests were carried
out by TÜV SÜD Product Service
GmbH in Germany.
In Alu Rehab we believe that wheelchairs
should be chosen based on a thorough
assessment focusing on the needs of the
user and demands from the environment.
Therefore it is important to know about
the possibilities and restrictions of the
wheelchair. Netti Mobile is an electrical
class B powerchair designed for users with
the need for comfort and relief.
The combination between the seating
system and the ergonomical solutions in the
frameconstruction, oers many possibilities
foradaptation and adjustments.
The wheelchair is designed for indoor and
outdoor use, and oers the possibility to
vary the sitting position.
Max user weight: 140 kg.
Specifications vary between
countries.

5
Model: Netti Mobile
Language: English Version: 2015/10 My-Netti.com
1.1 AREAS OF USE/INDICATIONS
FOR NETTI MOBILE
Netti Mobile is an electrical comfort
wheelchair for partially immobile persons
with physical and/or mental disabilities.
These disabilities may have multiple causes.
Netti Mobile has an adjustable seat and back
angle, thus facilitating for the user change of
position, mobilisation or posture correction
(stabilisation), wherever the following
functional impediments with their multiple
possible causes are present:
•limitedorlackingmobility
•limitedorlackingmusclepower
•limitedmovementrange
•lackingorlimitedtrunkandbodystability
•hemiplegia
•rheumatic-typedisorders
•craniocerebralinjuries
•amputations
•otherneurologicalorgeriatricdisorders.
An assessment is recommended to
determine whether the user is able to
control the wheelchair safely using the
factory default configuration program.
It may be necessary to modify the default
configuration program specific to the needs
of the user. In some cases an attendant only
wheelchair may be required.
1.2 CONTRAINDICATIONS
Netti Mobile must not be driven by persons
who do not have sucient cognitive ability
to understand how to operate the electronic
functions of this wheelchair.
Consult your healthcare professional
or wheelchair provider if your
condition changes
Warning, people who suer from
muscle spasms might inadvertently
cause their wheelchair to move or to
change direction unexpectedly, en-
dangering property, the user or 3rd
parties.
A risk assessment should be undertak-
en to determine whether the benefit
to the user exceeds the risks that have
been identified.
1.3 QUALITY AND DURABILITY
The Netti Mobile wheelchair is tested
at TÜV SÜD Product Service GmbH
in Germany, following the European
Standard DIN EN 12184:2009.
In normal use Alu Rehab A.S expects
the service life to be 5-6 years. In
practice the service life will depend
strongly external factors including
disability of the user, environment, and
wether regular maintenance has been
carried out.
1.4 THE ENVIRONMENT
AND WASTE DISPOSAL
Alu Rehab and its suppliers wish to
protect the environment.
This means:
•Thatweavoidusingenvironmentally
harmful substances and processes to
the greatest extent possible.
•ThatAluRehab’sproductsare
ensured a long service life and a high
degree of flexibility - to benefit th
environment and economy.
•Thatallpackagingcanberecycled.
•Thatthewheelchairwasdesigned
to be separated into its component
materials - to make recycling easier.
Contact your local recycling agent
to get correct information how to
handle in you area.

6
Model: Netti Mobile
Language: English Version: 2015/10
My-Netti.com
1.5 INFORMATION FOR RE-USE
All products from Alu Rehab
are designed to give years of
maintenance-free service.
All products can be adapted for re-
use by an authorised dealer. In order
to guarantee performance and safety,
Alu Rehab recommends the following
tests prior to any re-use.
Please examine the following
components for function, integrity etc.
and replace parts as necessary:
•controller,cables,actuatorcontrol,
power module & battery
•Wheels(tyretread)
•Wheelchairframe
•Cushions
•Hubs
•Brakefunction
•Directionalstabilityofwheels
•Bearingsandfrontcastors
Please also note the contents of
Section 11 Cleaning and care
1.6 ABOUT THIS MANUAL
In order to avoid damages while using
the Netti Mobile wheelchair, please read
this manual carefully before starting to
use the chair.
Symbol of forbidden actions.
No warranty can be claimed
whenever these actions are
implemented.
Symbol of warning.
Whenever this symbol is used,
caution has to be taken.
Symbol for
important
information.
Symbol for
useful tips.
Symbol for tools.
Anti-tip
Correctly fitted, the anti-tip will secure
the chair from tipping backwards. We
strongly recommend use of the anti-tips.

7
Model: Netti Mobile
Language: English Version: 2015/10 My-Netti.com
Model Control system Arm rest
remote control
Optional Attendant control
Netti Mobile M Shark DK-REM31 DK-ACU
Netti Mobile E1 Shark DK-REMD21 DK-ACU
Netti Mobile E2 Shark DK-REMD21 DK-ACU
Netti Mobile E4 DX2 DX2-REM420 DX2-ACU
1.7 NETTI MOBILE
Netti Mobile is available with a range of options to suit the vast majority of users.
Netti Mobile M Manually adjustable
Manual seat tilt in steps (4°, 8°, 12° = backwards).
Continuously manual adjustable backrest recline with gas spring.
Dynamic Shark control system
Netti Mobile E1
Electrical Seat Tilt
Continuously manual adjustable back rest recline with gas spring.
Dynamic Shark control system.
Netti Mobile E2
Electrical seat tilt & backrest recline.
Dynamic Shark control system.
Netti Mobile E4
Electrical Seating Tilt, Backrest Recline & Legrests.
Dynamic DX2 expandable control system.

8
Model: Netti Mobile
Language: English Version: 2015/10
My-Netti.com
1.8 TECHNICAL
CHARACTERISTICS
Netti Mobile is a class B powered
wheelchair designed for outdoor and
indoor use.
Specification varies between
countries.
Total weight: 94 Kg
(400 mm width chair)
Seat width:
400, 450, 500 mm
Seat depth:
(From back rest cushion to
front of seat plate)
400, 425, 450, 475, 500 mm
Seat height:
(From floor to top seat plate).
500 mm
Backrest height:
480 mm1
1Using back rest extender gives
600mm
* 40 cm model including battery
** Distance will vary depending
on the driving style and the
local conditions.
*** Max speed for Netti Mobile with
Intuitive Attendant contrl.5km/h
**** Netti Mobile is CE marked for
a maximum speed of up to 10km/h.
However in some jurisdictions,
powered wheelchairs with a
maximum speed of more than 6km/h
are subject to restrictions. Additional
approvals or insurance may also be
required. By specifying a maximum
speed of 8 or 9,9km/h you accept
the responsibility for ensuring the
wheelchair will comply with any
applicable local regulations and any
necessary insurance will be obtained.
z These are not recommodations.
Safe slope is 6°
Wheelchair class B
Max load up to140 kg
Crash tested to ISO7176-19 for users up to136 kg
Overall length with foot support 1110 mm
Overall width 600 mm
Folded length 820 mm
Folded width 650 mm
Folded height 950 mm
Total mass* 94 kg
Mass heaviest part 29,1kg
Slope for static stability downhill z max 18,4°
Slope for static stability uphill z max 14,8°
Slope for static stability accross z max 19°
Maximum safe slope 6°
Braking distance from max speed 1- 2,1m
Seat plane angle, fixed steps
(backwards)
4°, 8°,12°
Seat plane angle cont. adjustable -9° to 16°
Eective seat depth 400-500 mm
Eective seat width 400 mm
Seat surface height at front 500 mm
Backrest angle 88º-113º
Backrest height 480 mm
Foot support to seat distance
Universal foot support
Angle adjustale foot support
265 - 550 mm
280 - 770 mm
Leg to seat surface angle
Universal foot support
Angle adjustale foot support
62º - 158º
105º - 182º
Arm support to seat distance 185-325 mm
Front location of armrest structure 300-430 mm
Minimum turning radius 800 mm
Tyre dimensions castor wheels 2.8/2.54”(223x68)
Tyre dimensions driving wheels 3.0- 8”(350x78)
Reversing width 820 mm
Obstacle height 100 mm
Maximum range on full batteries
according to ISO7176-4**
25 km
Standard maximum speed 6 km/h***
Optional maximum speed 8 or 9,9 km/h****
Battery 2x12 V;50 Ah

9
Model: Netti Mobile
Language: English Version: 2015/10 My-Netti.com
2. QUICK
REFERENCE
The content of this page is a summary
of the whole manual. It gives a brief
introduction to the use and care of the
Netti Mobile wheelchair.
The quick reference is not a
replacement for the manual, only a
reminder/check list.
•Putthebackrestback,andsecurethe
recline gas strut (Chapter 7.2)
•Installthecushions(Chapter7.6and7.7)
•Mountthefootsupports(Chapter7.9)
•Mounttheheadsupport(Chapter6.2)
•Setanti-tipinactiveposition(Chapter
7.5)
•Mountaccessory.(Seechapter6formore
information. Mounting descriptions will
accompany the accessory.)
For troubleshooting, see chapter 8.
For mounting and adjustments see
chapter 6 and 7.
Netti Mobile is approved to be used
as a seat in a motor vehicle. Max. load
136 kg (Chapter 7.15).
When equipped with the Dynamic
accessory kit: The maximum load
becomes 136kg. The extension
brackets shown in section G4 must be
fitted when used as seat in a car.
Drive carefully!
Usage temperature: -10°C to 50°C
Storage temperature: -20°C to 65°C
Salt water will increase the risk of
corrosion.
When the chair is tilted rearwards,
the anti tips and brakes should
always be in use.
Be sure to lock all handles properly.
The anti-tips should always be used
for the safety of the user.
Metal components may become very
hot when exposed to direct sunlight.
Make sure to charge the battery
regularly,
Make sure to do regularly maintenance.
Never stand on the foot supports due
to risk of tipping forwards.
Never lift the wheelchair by the foot
supports or arm supports.
Product configuration may vary
between dierent countries.
For visually impaired people,
manuals and catalogues can be
downloaded at:
www.My-Netti.com
If in doubt - contact your dealer!

10
Model: Netti Mobile
Language: English Version: 2015/10
My-Netti.com
3. ELECTRO-
MAGNETIC
INTERFERENCE
AND WARNINGS
Powered wheelchairs may be susceptible
to electromagnetic interference (EMI),
which is interfering electromagnetic
energy (EM) emitted from sources such as
radio stations, TV stations, amateur radio
(HAM) transmitters, two-way radios, and
cellular phones. The interference (from
radio wave sources) can cause the power
chair to release its brakes, move by itself,
or move in unintended directions. It can
also permanently damage the power
chair control system. The intensity of the
interfering EM energy can be measured in
volts per meter (V/m). Each power chair can
resist EMI up to a certain intensity. This is
called its “immunity level.” The higher the
immunity level, the greater the protection
will be.
There are a number of sources of relatively
intense electromagnetic fields in the
everyday environment. Some of these
sources are obvious and easy to avoid.
Others are not apparent and exposure is
unavoidable. However, we believe that by
following the warnings listed below, your
risk to EMI will be minimized.
Netti Mobile, degree of protection: IPX4.
Netti Mobile is EMC approved.
It is very important that you read
this information regarding the
possible eects of Electromagnetic
Interference on your power chair.
The sources of radiated EMI can be broadly
classified into three types:
•Hand-heldportabletransceivers
(transmitters-receivers) with the antenna
mounted directly on the transmitting unit.
Examples include: citizens band (CB)
radios, “walkie talkie,” security, fire, and
police transceivers, cellular telephones,
and other personal communication
devices.
Some cellular telephones and similar
devices transmit signals while they
are ON, even when not being used.
•Medium-rangemobiletransceivers,such
as those used in police cars, fire trucks,
ambulances, and taxis. These usually have
the antenna mounted on the outside of
the vehicle.
•Long-rangetransmittersandtransceivers
such as commercial broadcast transmitters
(radio and TV broadcast antenna towers)
and amateur (HAM) radios.
Other types of hand-held devices, such
as cordless phones, laptop computers,
AM/FM radios, TV sets, CD players,
and media players, and small
appliances, such as electric shavers and
hair dryers, so far as we know, are not
likely to cause EMI problems to your
power chair.
Because EM energy rapidly becomes
more intense as one moves closer to the
transmitting antenna (source), the EM
fields from hand-held radio wave sources
(transceivers) are of special concern. It is
possible to unintentionally bring high levels
of EM energy very close to the power chair
control system while using these devices.

11
Model: Netti Mobile
Language: English Version: 2015/10 My-Netti.com
This can aect power chair movement
and braking. Therefore, the warnings listed
below are recommended to prevent possible
interference with the control system of the
power chair.
Electromagnetic interference (EMI) from
sources such as radio and TV stations,
amateur radio (HAM) transmitters, two-
way radios, and cellular phones can aect
the power chair. Following the warnings
listed below should reduce the chance of
unintended brake release or power chair
movement, which could result in serious
injury.
Do not operate hand-held transceivers
(transmitters-receivers), such as citizens
band (CB) radios, or turn ON personal
communication devices, such as cellular
phones, while the power chair is turned
ON.
Be aware of nearby transmitters, such
as radio or TV stations, and try to avoid
coming close to them.
If unintended movement or brake
release occurs, turn the power chair
OFF as soon as it is safe.
Be aware that adding accessories or
components, or modifying the power
chair, may make it more susceptible to
EMI.
Report all incidents of unintended
movement or brake release to the
distributor of the product. Note
whether there is a source of EMI
nearby.
The wheelchair might disturb the
operation of devices in its environment
that emit electromagnetic fields (e.g.
alarm systems of shops, automatic
doors etc.)

12
Model: Netti Mobile
Language: English Version: 2015/10
My-Netti.com
14
15
16
4.
DESCRIPTION*
1. Control unit
2. Arm support pad
3. Push bar
4. Backrest cushion
5. Rear light
6. Main wheel
7. Motor
8. Front castor
9. Front light
10. Foot plate
11. Seat cushion
12. Intuitive attendant control
13. Actuator control
14. Battery box
15. Electronic box
16. Actuator box (if present)
If any of these parts are
missing, please contact your
dealer.
* Product configuration
may vary between
countries.
12
13
Netti Mobile
Netti Mobile Intuitive equipped with Intuitive
attendant control accessory kit

13
Model: Netti Mobile
Language: English Version: 2015/10 My-Netti.com
STANDARD
SEAT*
•Seattilt**
Either 3 step 4°, 8°, 12° (backwards)
or continuously adjustable with gas
spring or actuator: -9º to +16º
•Pressuredistributivecushion
•Adjustabledepthof10cm
BACKREST
•Angle** 88°-113°
•Height:50cm
•Thebackrestcushionhasintegrated
lumbar support and side support
•Pushbar
FOOT SUPPORT*
•Footsupportwithxedangle.
•Height-andangleadjustablefoot
plates
•Removable
ARM SUPPORT
•Heightadjustable
•Revolvable
ARM PAD
•Armpad385x58mm
WHEELS
•14”drivingwheels-pneumatic
•9”frontcastors-pneumaticas
standard,
or optionally with foam filled tyres.
*Depends on model. See page 8.
** Netti Dynamic Mobile adjustable to user
requirements.
ACCESSORIES
SEAT
•Hipbelts(Seechapter6)
•Dierentseatcushions
BACKREST
•Electricalrecline(Seechapter8.1.6)
•Backrestextender(Seechapter6)
•Lumbarsupportandwedge(Seechapter6)
•Dierentbackrestcushions
ARM SUPPORT
•Hemicushions(Seechapter6)
WHEELS
•14”drivingwheels,PU-punctureprooftyres
•9”frontcastors,PU-punctureprooftyres
HEAD SUPPORT
•Height,depthandangleadjustable 
•Removable
•Dierentheadsupportmodels
(See chapter 6)
Tables
•Trays(Seechapter6)
5. FEATURES OF NETTI MOBILE
All Netti Mobiles are equipped with Lights and brakes.

14
Model: Netti Mobile
Language: English Version: 2015/10
My-Netti.com
Backrest Cushions
Many to choose from.
Please contact your
dealer.
Foot box
Upholstered
Foot supports:
Fixed angle foot support
Footplates are height and
angle adjustable
Foot support
Angle adjustable -
mechanical
Electrical Foot support
Amputation support
Foot board with lock
The foot support can
be swung to the side
like standard foot
supports.
6. ACCESSORIES
Belts
Hip belts /pelvic
stabilizers with
upholstery and
car lock ( 20845).
(See chapter 6.1 for mounting)
Trays
2 models:
Universal and
reinforced
Upholstery for tray
Oers a soft base for
the arm resting on the
tray.
Wedge
Increases side support.
Lumbar support
Increases lumbar
curvature.
Vital Base Integral
Pelvic stabilizer.
Seat Cushions
Many to choose from.
Please contact your
dealer.

15
Model: Netti Mobile
Language: English Version: 2015/10 My-Netti.com
Head support
Support A Side support also
with forhead band
Support B Small
Support C Large.
Support D Comfort
Support E Adjustable side
support
Support F with cheeck
supports
Hygiene cover
Protects the core of the
head support.
Hemi cushion
An accommodating
support for hemiplegic users.
Head cushion
40x40 cm cushion with
Kospoflex filling and rubber
band.
Head cushion Comfort
Cushion with Kospoflex
filling to pull onto head
rest.
Backrest extender
12 cm extender.
To be used together with
60 cm back rest cushion.
Side support Correction
Meant for correction of
bad postures in the
upper trunk.
Pad for side support
Correction
Side support Stable
Meant for users with de-
creased stability of the
upper trunk. For otimal
function use together
with Stable cushion.
Pad for side support Stable
Upholstery for
calf support bracket
Reduces pressure.
Calf pad hinged
The user doesn’t
have to lift the leg
when mounting or
dismounting the
foot supports.
Abduction block
The block reduces
abduction.
Small: 80 mm width
Medium: 120 mm width
Large: 140 mm width
Attendant control for:
Shark System:
DK-ACU
DX2 System:
DX2-ACU

16
Model: Netti Mobile
Language: English Version: 2015/10
My-Netti.com
6.1 MOUNTING OF HIP BELT/
PELVIC STABILIZER
Illustration 6.1.1
•Pullthebeltthroughtheholeinthe
hip belt bracket.
Ill. 6.1.1
Illustration 6.1.2
•Threadthebeltbackthroughthebelt
clamp.
Ill. 6.1.2
Illustration 6.1.3
•Fixthehipbeltbrackettotheback
rest hinge in the rearmost hole, using
the enclosed screws and nuts.
Ill. 6.1.3
2 pcs13 mm open-end spanner.
6.2 MOUNTING OF HEAD SUPPORT
A - Lever for depth adjustment
B - Wheel for angle adjustment
C - Lever for height adjustment
D - Head support bracket
•Placethesquarednutinthetraceofthe
head support bracket as shown above.
•Placetheheadsupportinthehead
support bracket.
•Theheightandthedepthofthehead
support is set to the required positions
and tightened.

17
Model: Netti Mobile
Language: English Version: 2015/10 My-Netti.com
•Theheadsupportbracketisxedby
tightening the four screws two by two
diagonally so the bracket is fixed with
the same strength divided on the four
screws.
Adjusting the head support in depth:
•Releasethelockingleverontopofthe
vertical bar (A).
•Adjusttheheadsupportandxitin
required position.
Adjusting the head support in height:
•Releasethelockingleveronthehead
support adapter (C).
•Adjusttheheadsupportandxitin
required position.
Adjusting the head support in angle:
•Releasetheadjustmentwheelattherear 
of the horizontal bar (B).
•Adjusttheheadsupportandxitin
required position.
Adjusting the head support sideways:
•Theheadsupportadaptercanbe
and left, moved both to the right
giving the possibility to accomodate
special needs for head support.
•Untightenthefourscrewsholding
the adapter together.
•Movetheadaptertotherequired
position and fix the adapter by
tightening the screws diagonally.
Remember to release the levers
when adjusting the head support.
If the head support stand does
not fit the bracket perfectly the
bracket is probably fixed too tight
or unevenly.
After fitting the head support fix it
properly by tightening the little set
screw in the centre on top of the
head support bracket using an
Allen key.
If the head support seems too short
in height, it can be turned 180° by
releasing the adjustment wheel at
the rear of the horizibtal bar (B)

18
Model: Netti Mobile
Language: English Version: 2015/10
My-Netti.com
•Lockthebackrestbypushingthelocking
bolt through the plastic bracket and
gas spring locking head.
To check that the back rest is locked,
grip the push bow and press the back
rest forward. If the backrest falls
forward - repeat the locking procedure
or contact your dealer.
Under the seat plate, there is a position
bracket for the gas strut. The bracket has
five holes, covering seat depths
40, 42,5, 45, 47,5 & 50 cm.
The hole positions are in accordance with
the holes in the backrest hinge. If the gas
spring is mounted in the foremost hole of
the position bracket under the seat, the
backrest hinge should also be mounted in
the foremost hole etc.
7. ASSEMBLING
AND
ADJUSTMENT
7.1 UNPACKING
1. Unpack all the parts, and check that
everything is there according to the
packing list.
2. Check and adjust the seat depth
(Chap. 7.3)
3. Mount the backrest (Chapter 7.2)
4. Mount the seat and back cushion
(Chapter 7.6 and 7.7)
5. Mount the foot supports (Chapter 7.9)
6. Mount the head support (Chapter 7.10)
7. Mount any accessories (Chapter 6).
Weight of components (45 cm width chair):
Foot support Universal.: 1,2 kg each
Uno|Back: 1,25 kg
VB Sit: 1 kg
Head support A: 1 kg
Head support C: 0,9 kg
Battery: 14,5 kg
Tools needed are described under each
chapter. Accessories described in chapter 5
is a presentation of options and will be
delivered with separate mounting
descriptions.
7.2 BACKREST
•Tomountthegasspring,liftthepush
bow with one hand, and lead the gas
spring locking head into the plastic
bracket.

19
Model: Netti Mobile
Language: English Version: 2015/10 My-Netti.com
7.3 SEAT DEPTH ADJUSTMENT AT
THE REAR.
•Iftheseatdepthshouldbeadjustedat 
the rear, release the locking bolt from
the plastic bracket (Ill. 6.5.2).
•Findtherequiredpositionforthelocking
head in the plastic bracket, and remove
the plastic plug from this hole.
•Lockthebackrestbypushingthelocking
bolt through the plastic bracket and
the gas spring locking head.
•Afterchangingtheholepositioninthe
plastic bracket, the hole position in the
back rest hinge must be changed into the
parallel position.
Check that the hole in the back rest
hinge and the plastic bracket are
mounted in parallel position.
6 mm Allen-key
7.4 SEAT DEPTH ADJUSTMENT IN
FRONT
It is possible to adjust the seat depth with
up to 10 cm in front. Do the following:
•Screwoutthescrewsintheextension 
piece
•Placetheextensionpieceinthewanted
position
•  R e p l a c e  a n d  t i g h t e n  t h e  s c r e w s 
6 mm Allen-key
If the user has spastic tendencies the
extension piece should not be pulled
out more than 5 cm.
7.5 ANTI TIP
Use of the anti tip
•Pulltheantitipout
•Turnitupordown180°.
•Lockitinposition
The anti tip should always be used for
the safety of the user.
7.6 SEAT CUSHION
The seat cushion is attached to the seat
plate with velcro.
It is very important to place the
cushion in the wheelchair before use.

20
Model: Netti Mobile
Language: English Version: 2015/10
My-Netti.com
7.7 BACKREST CUSHION
The backrest cushion is attached to the
backrest with the velcro.
The seat and back rest cushion covers
are washable and thereby reuseable.
Follow the instruction on the cushions
for correct maintanance and washing
of the cushions.
7.8 ADJUSTING THE VELCRO
BACK
•Loosenthestrapsandplacetheback
rest cushion so that the user gets room
for the bottom and the integrated
lumbar support in correct position.
•Tightenthestrapssothattheyfollow
the curvature of the spine and gives a
little extra support at the top of the
sacrum.
7.9 FOOT SUPPORTS
Netti Mobile has the following foot
support alternatives:
1. Standard is Fixed angle foot support,
swingable and removable with footboard
height and angle
adjustable. The foot
plates are foldable and
can be angled in fixed
positions.
2. Angle adjustable foot support
(manual or electric)
3. Dynamic angle adjustable foot support
(Netti Dynamic Mobile)
Mounting of the
standard foot support
•Mountthefoot
support by holding
onto the bar bending
down towards the
foot plate. Hold it in
an angle of app. 20°
to the side frame.
Put it into the black
plastic lock attached to the extracable
adjustment bar. Swing it in and push
down.