Neutral Posture Knomi Weight Sensitive User manual

2. Adjustable Lumbar
1. Back Height
7. Arm Height
9. Arm Pad Position
8. Arm Pad Rotation
3. Seat Slider (Depth)
6. Arm Width
4. Tilt Lock
5. Seat Height
Knomi™
Weight Sensitive

Knomi™— Weight Sensitive
1. BACK HEIGHTSlowly lift the back until you have the appropri-
ate lumbar support. If the back is too high, lift the back all
the way up and then lower to the rst position.
2. ADJUSTABLE LUMBARSlowly slide the adjustable lumbar up or
down until you have the appropriate lumbar support.
3. SEAT SLIDER DEPTHWith your back against the backrest, press
the button to disengage the lock and slide the seat to your
desired position. Release the button to lock the seat in place.
4. TILT LOCKTo lock tilt position, recline in seat until at desired
angle and then press the button in to lock. To unlock, press
the button agian so that it is no longer pressed in.
5. SEAT HEIGHTLift the lever and lift your weight to raise the seat
to the desired position. To lower the seat, lift the lever while
remaining seated.
6. ARM WIDTHPush lever down to release the arm and slide the
arm to the proper position. Lift lever to lock arm into place.
7. ARM HEIGHTPress button to adjust height until your arms are
properly supported.
8. ARM PAD ROTATIONRotate arm pad in either direction until in it
is in a comfortable position.
9. ARM PAD POSITIONSlide arm pad forward or backward until it is
in a comfortable position.
Visit NeutralPosture.com or call 979.778.0502
© 2018 Neutral Posture, Inc. All rights reserved.